Products and Equipment from Hyatt Industries Limited on Environmental Expert

S-670 - Laser Alignment

The S-670 is a next-generation new shaft alignment laser system, and part of the new StealthSeries™ developed by Hamar Laser, and distributed by Hyatt Industries.

S-680 - Laser Alignment

The S-680 is a next-generation new shaft alignment laser system and part of the new StealthSeries™ developed by Hamar Laser, and distributed by Hyatt Industries.

L-743 - Ultra Precision Triple Scan System

The L-743 Ultra-Precision Triple Scan® Laser is the ideal instrument to quickly and accurately calibrate the geometry of almost all machining centers. It is also very useful for setting the wing bases on transfer lines perpendicular to the line's centerline. It can also be used to set the elevation of the bases and to make the 'ends' parallel to the centerline.

L-742 - Paper Machine

Designed primarily for roll alignment and other similar applications, the L-742 Dual Scan® Laser System is the only laser in the world to offer 2 automatically rotating laser planes that are accurate enough for today's ever-tightening tolerances. The laser can be configured by the factory to have either 2 vertical planes, or 1 horizontal and 1 vertical laser plane. This creates a powerful tool to not only MEASURE but also FIX problems in a...

L-742 Ultra precision System - Printing Press

The L-742 Ultra-Precision Dual Scan Laser provides 2 automatically rotating laser planes for even the most difficult roll alignment applications. It is a very affordable yet powerful laser alignment system that will not only MEASURE but also FIX roll misalignment on almost any kind of paper mill or process mill, all in a fraction of the time of laser transits and theodolites.

L-740 - Continouus Casters

The L-740 Ultra-Precision Leveling System offers a much faster, more accurate way of setting the pass line elevations on caster segments. With wireless targets offering resolutions down to 0.00002' (0.0005 mm), automatically sweeping laser planes and high-powered alignment software, the L-740 is the ideal alignment tool for caster segment applications.

L-732 - Textiles Machines

The L-732 Precision Dual Scan Roll Alignment System is one of only 2 lasers in the world (the other is the L-742) to offer 2 automatically rotating laser planes that are highly accurate and versatile. This creates a powerful tool to not only MEASURE but also FIX roll misalignment on almost any kind of process mill, all in less than half the time of conventional methods.

Film-Line Roll Alignment with L-742 System

The L-742 Ultra-Precision Dual Scan® Laser offers 2 automatically rotating laser planes. It has been designed specifically for roll alignment applications. It is a very affordable yet powerful tool to not only MEASURE but also FIX roll misalignment on almost any kind of film line or process mill, all in a fraction of the time needed with conventional methods.

» Read more... » Contact now / Request quote 0 Comments » Downloads(1)

Steel Mills with L-743 Ultra Precision Triple Scan System

One of the more time-consuming tasks in maintaining continuous-caster steel mills is setting the correct caster roll pass line. Unlike using optics that requires at least 2 operators, the L-743 only requires 1 operator, and since the laser automatically sweeps a reference plane, it is a very simple process to measure and set the heights of a caster segment rolls. The heights can be set using precision inserts with our targets, as the tolerance of the...

» Read more... » Contact now / Request quote 0 Comments » Downloads(1)

Machining Centers: HBM, VBM, VTL, VMC, HMC with L-743 Ultra

The L-743 Triple Scan Laser Alignment System is one of only 2 lasers (the other is the L-733) in the world to offer 3 automatically rotating laser planes that are accurate enough for today's ever-increasing tolerances. This creates not only a powerful measurement tool for surface flatness, squareness and straightness MEASUREMENTS, but also a tool that FIXES alignment problems in a fraction of the time needed with conventional methods.

» Read more... » Contact now / Request quote 0 Comments » Downloads(1)

Machining Center with L-743 Ultra Precision Triple Laser Scan

The L-743 Ultra-Precision Triple Scan® Laser is an ideal instrument to quickly and accurately calibrate the geometry of almost all machining centers. It is one of only 2 lasers in the world (the other is the L-733) to offer 3 automatically rotating laser planes that are accurate enough for today's ever-tightening tolerances. This creates a powerful tool that not only FINDS, but also FIXES geometry problems, all in a fraction of the time needed with...

» Read more... » Contact now / Request quote 0 Comments » Downloads(1)

General Levelling with L-730 System

One of the critical components of any laser system is the straightness or flatness of the laser beam or plane, as this is the reference from which the measurements are made. The L-730 features a continuously rotating laser plane that is flat to 2 arc seconds (0.00012'/ft or 0.01 mm/M) in a 180° sweep and 1 arc second in a 90 sweep. It also features 2 built-in level vials, accurate to 2 arc seconds, and an operating range of range of 100 feet (30.5...

» Read more... » Contact now / Request quote 0 Comments » Downloads(1)

Bar Feeders with L-705 System

Hamar Laser manufactures the most accurate and portable bore alignment laser on the market today. In most cases, our bore alignment systems can fit into a case that is not much larger than a briefcase. With a variety of target options, Hamar Laser's bore alignment systems have a solution for you. There are self-centering targets, see-through targets, 2-axis targets and 4-axis targets, that use either hand-held readouts or Windows-based color software....

» Read more... » Contact now / Request quote 0 Comments

Transfer Line Spindles with L-700 spindle Alignment System

Since 1967, Hamar Laser has designed and manufactured alignment systems that offer unparalleled accuracy and alignment time savings. Our patented 4-axis L-700 Spindle Alignment System was designed specifically for transfer-line spindle alignments. The system provides 4-axis, live data, so you can align your machines up to 70% faster than conventional methods. With a resolution of 0.00002' (.0005 mm) and large, color, computer graphics, the L-700 is the...

» Read more... » Contact now / Request quote 0 Comments » Downloads(1)

Boring Bars with L-700 System

Hamar Laser's alignment systems offer unparalleled accuracy and alignment time savings. Using components from several different systems, Hamar Laser has developed a package to align boring-bar bearings with as little effort as possible. Our L-700 Spindle Laser and A-510 Self-Centering Bore Target create a package to align boring-bar bearings up to 70% faster than conventional methods. With an accuracy of +/-.0002' (.005 mm) and large, color computer...

» Read more... » Contact now / Request quote 0 Comments » Downloads(1)

Precision levelling with L-740 System, 4 times better

The L-740 Laser Leveling and Alignment System is the most accurate and easy-to-use surface flatness and straightness measurement system on the market today. It features a continuously rotating laser plane that is the flattest in the world, wireless targets and built-in 1-arc second level vials. Continuously rotating laser planes and the ability to use multiple sensors at the same time means the L-740 can level machinery 2 to 3 times faster than laser...

» Read more... » Contact now / Request quote 0 Comments » Downloads(1)

Split Joint Flatness with L-730 System

Measuring split joints during an outage can take hours and hold up other critical work on the turbine. Traditionally split joints are measured with transits and usually require at a 2-man crew. The measurements rely on the human eye and are subject to interpretation by the operator, an inexact science.

» Read more... » Contact now / Request quote 0 Comments » Downloads(1)

Engine Block with L-705 System

Hamar Laser produces the most accurate and portable bore alignment laser on the market today. In most cases, our bore alignment systems can fit into a case not much larger than a briefcase. With a variety of target options, Hamar Laser's bore alignment systems have a solution for you. There are self-centering targets, see-through targets, 2-axis targets and 4-axis targets, that use either hand-held readouts or Windows-based color software. And as with...

» Read more... » Contact now / Request quote 0 Comments

Cylinders, compressors with L-705 System

The L-705 Alignment System has been designed to be very similar to tight-wire alignments but without the limitations and problems of using the wire. Its simple setup and fast data taking mean timesavings of 50% or more are very common.

» Read more... » Contact now / Request quote 0 Comments » Downloads(1)

Extruders with L-705 Laser Boroscope System

With simplified fixturing and self-centering targets, the L-705 Laser Borescope can be setup and misalignment data taken in as little as 10 minutes. And in most cases, bore straightness data can be taken and analyzed in 10 minutes or less.

» Read more... » Contact now / Request quote 0 Comments » Downloads(1)

General Bore Alignment with L-705 System

Hamar Laser has developed the world's first self-centering bore alignment target that uses no moving parts. It takes just seconds to position the target in the bore for an accurate bore straightness measurement down to .0002 (.005 mm)'. Whether checking for bore alignment or straightness, the L-705 Bore Laser dramatically simplifies the process.

» Read more... » Contact now / Request quote 0 Comments » Downloads(1)

Pulley Partner

The Pulley Partner® laser pulley alignment system is lightweight, compact and durable. The unit magnetically attaches to the inside or outside face of any pulley or sprocket and has no small parts or targets that can get lost. We use our proven reflected laser beam technology for maximum angular resolution, thus providing you with the most reliable and accurate readings that no other method or tool can match.

Pulley PRO Green

The PULLEY PRO GREEN laser pulley alignment tool is powerful, rugged and durable. The unit magnetically attaches to the inside or outside face of any pulley or sprocket and has no small parts to get lost. We use proven reflected beam technology for maximum angular resolution; thus providing you with the most reliable and accurate readings that no other laser pulley alignment tool or method can match.

Precut Stainless Steel Shims

Hyatt precut shims are manufactured from 304 stainless steel and are permanently marked /etched/ for size and exact thickness.

Portable Jack Bolt System

Hyatt Portable Jack Bolt System is used to move machines horizontally in a controlled and accurate manner.

Compass-6000

With the Compass-6000TM platform Brüel & Kjær Vibro offers a new modular platform for safety, trending and diagnostic monitoring of machines and production plants. Building on a strong and well-proven technology platform and experience, Compass-6000TM integrates past and future possibilities into one system dedicated to the applications of safety monitoring and condition monitoring.

Vibrocontrol 4000

The universal - powerful - modern – cost-effective – modular system for conventional protection and monitoring.

Vibrocontrol 6000

The VIBROCONTROL 6000 safety monitoring system (VC-6000) is a modular 19” rack based system designed for continuous monitoring of machines using a wide range of permanently installed sensors.

8315 - General Purpose Accelerometer

The 8315 Accelerometer is designed for permanent vibration monitoring installations in a wide variety of applications. It is intended as a general-purpose monitoring transducer. It may be used in areas where there is radiation.

AS-062 - General Purpose Accelerometer

CCS-type, axial-stud mounting, open ends, up to 125°C.

8324

Type 8324 is especially well suited for use in nuclear power plants and in applications with low or very high temperatures. The accelerometer utilises a compression type element to provide excellent temperature stability and a wide operational bandwidth. Type 8324 is well suited for use with permanently installed machine condition monitoring systems. Specifications: sensitivity: 1,0 pC/ms-2, +/- 5%, type of accelerometer: Charge, measuring range (peak):...

5704

The 5704 accelerometer is developed to meet the requirements of permanent vibration monitoring installations in a potentially explosive atmosphere (zone 0). It is intended as a general purpose monitoring transducer.

» Read more... » Contact now / Request quote 0 Comments

5874

The Type 5874 Charge accelerometer is designed especially for monitoring the vibration of a wide variety of plant machinery in harsh environments as well as for monitoring gas turbine applications that require long mean time between failures.

» Read more... » Contact now / Request quote 0 Comments » Downloads(1)

Hyatt Industries Limited

Contact

View Phone/Fax Number

Visit Website

PRODUCTS

Product / Service Lines:

Shaft Alignment