Aerosols Equipment in Italy

Served | Office inNear
180 Results found
  • Category: Air & Climate ×

  • Subcategory: Aerosols ×

  • Location: Europe ×

  • Location: Italy ×

Model 3302A - Aerosol Diluter

by TSI Incorporated     based in Shoreview, MINNESOTA (USA)

Aerosol Diluter 3302A reduces particle concentrations of high-concentration aerosols, providing a representative sample that meets the input requirements of the Aerodynamic Particle Sizer® (APS) spectrometer. This APS accessory achieves dilution ratios of 100 to 1 and 20 to 1 using easy-to-change capillary tubes. Two diluters in a tandem ...

Model 3079 - Aerosol Generator

by TSI Incorporated     based in Shoreview, MINNESOTA (USA)

Aerosol Generator 3079 is a rugged, compact atomizer generates particles in concentrations up to 108 particles/cm3 and offers an adjustable flow rate from 1.0 to 4.2 L/min. A built-in, low-noise compressor provides compressed air, and the atomizer head is made entirely of stainless steel. Operating components are protected by a hood, making this ...

Model 3076 - Aerosol Generator

by TSI Incorporated     based in Shoreview, MINNESOTA (USA)

Aerosol Generator Model 3076 is a Collison-type atomizer that generates aerosols of constant particle size in concentrations over 107 particles/cm3. Its nominal aerosol flow rate is 3.0 L/min. Stainless-steel components make it suitable for the specialized applications listed below, in additon to basic aerosol research.

Kanomax - Model PAMS - Portable Aerosol Mobility Spectrometer

by Kanomax USA, Inc.     based in Andover, NEW JERSEY (USA)

The Portable Aerosol Mobility Spectrometer is an electrical mobility size spectrometer designed for portable, mobile, or handheld aerosol sampling applications.

AeroFid - Model 60 - Automatic Micro Leak Detector for Filled Aerosol Cans

by J.U.M. Engineering GmbH     based in Karlsfeld, GERMANY

The AeroFid-60 tests up to 80 cans per minute. This compact, over the conveyor machine houses the high speed leak analyzer, the control panel with touch screen display and the zero air generator. Our long standing, fast responding Model 22B hydrocarbon propellant sensor automatically extracts one sample at a time from the head and valve area of ...

AeroFid - Model 100 - Automatic Micro Leak Detector for Filled Aerosol Cans

by J.U.M. Engineering GmbH     based in Karlsfeld, GERMANY

The AeroFid-100 tests up to 120 cans per minute at a footprint of less than 1 sqare meter. This compact, over the conveyor machine houses the high speed leak analyzer, the control panel with touch screen display and the zero air generator. Our long standing, fast responding Model 22B hydrocarbon propellant sensor automatically extracts one sample ...

AeroFid - Model 200 - Automatic Micro Leak Detector for Filled Aerosol Cans

by J.U.M. Engineering GmbH     based in Karlsfeld, GERMANY

The AeroFid-200 tests up to 250 cans per minute also at a footprint of less than 1 sqare meter. This compact, over the conveyor machine houses the high speed leak analyzer, the control panel with touch screen display and the zero air generator. Our long standing, fast responding Model 22B hydrocarbon propellant sensor automatically extracts one ...

Model 565 - Environmental Wide Range Aerosol Spectrometer

by Grimm Technologies     based in Douglasville, GEORGIA (US) (USA)

Gravimetric measurements have shown that the entire part of the mass of fine dust below 0.5 µm does not even total one percent.  But if the particles are counted, 80% of all particles are in the size range below 0.5 µm.  It is not obvious if the particle number or the particle mass has a greater effect on the human ...

Palas - Model RBG 1000 - Low-Concentration Test Aerosol Generator

by Palas GmbH     based in Karlsruhe, GERMANY

Generation of test aerosols from powders, pollen, and biological agents, mass flow approx. 40 mg/h – 430 g/h. Low-concentration solid particle aerosols produced from powders are required for many applications in research, development, and quality assurance and for the calibration of particle measurement devices. For more than 25 years, the ...

Palas - Model BEG 1000 - Low-Concentration Test Aerosol Generator

by Palas GmbH     based in Karlsruhe, GERMANY

Generation of test aerosols from powder, dust, pollen, etc.; mass flow approx. 8 g/h to 6 kg/h. Many applications in research, development, and quality assurance require solid particle aerosols from powders and dusts. For over 20 years, the BEG 1000 has been successfully used for the reliable dispersion of non-cohesive powders, e.g. to generate ...

Need help finding the right suppliers?

Let the XPRTs do the work for you