Air Modeling Equipment

79 Results found
  • Category: Air & Climate ×

  • Subcategory: Air Modeling ×

HAZMAT - HM-1 - Weather Station

by RainWise Inc.

The HM-1 HAZMAT weather station is designed for first responders to hazardous material incidents. The weather station provides important real-time information for monitoring and responding to incidents. The station works in conjunction with CAMEO/ALOHA software that enables responders to monitor plume dispersion. CAMEO was developed by Chemical ...

Larson Davis - Model 831 - Sound Level Meter

by Larson Davis, a division of PCB Piezotronics

Larson Davis Model 831 Class 1 Sound Level Meter. This versatile instrument, with high definition display, performs the functions of several instruments. It puts the combined features of a precision Class 1 sound level meter, environmental noise analyzer, personal noise dosimeter, and a real-time frequency analyzer in the palm of your hand. The ...

UVIC - MkIV - High Sensitivity Vapour Detection System

by Cambridge Environmental Research Consultants (CERC)

CERC is delighted to have reached an agreement with ARID to publicise ARID's high density vapour detection system UVIC Mk IV. This state-of-the-art photo-ionisation detector operates under full micro-processor control, features ample on-board memory, internal rechargeable battery and has a generous-sized visual display for data examination.

DIFTXTA - Isoflurane, Enflurane and Halothane - Anesthetic gas monitoring

by Ormantine USA Ltd., Inc.

Isoflurane, Enflurane and Halothane are widely used as anesthetic gases therefore emissions need to be monitored through indoor air surveys. Our anesthetic gas analysis has been carried out in hospitals, dentists and other local health authorities over many years for workplace monitoring of exposure. Personal air sampling has now become an issue ...

DIFMLS5A - Ambient Nitrous Oxide Monitoring

by Ormantine USA Ltd., Inc.

Nitrous oxide is a greenhouse gas emitted from agricultural soils, manure, sewage treatment, fossil fuel combustion and microbial action. Transportation is also an increasing source due to emissions from catalytic converters.This N2O detector can be used as a passive monitor or for pumped sampling (active monitor). Suitable for carrying out ...

LOA-005 - Long Baseline Optical Anemometer And Turbulence Sensor

by Optical Scientific Inc. (OSi)

The Long Baseline Optical Anemometer and Turbulence Sensor measures the path-averaged crosswind and turbulence along distances up to 10 kilometers. Designed for outdoor use, it mounts on tripods for rapid setup, and is completely eye-safe. The LOA is ideal for outdoor environmental monitoring where general mass emissions measurements are required. ...

Plasma Injector - Cold Plasma Odor Control

by UNIQAIR Technologies Ltd.

Odor control by the Plasma-Injector is based on high speed oxidation. The oxidized molecules cannot be detected organoleptically, hence they do not bother the observer. The Plasma-Injector system consists of a stainless steel cabinet with Plasma Reactors. Ambient air is radiated and, as a result, the oxygen and water vapour molecules are ...

DIFVOC - Volatile Organic Compound Monitoring

by Ormantine USA Ltd., Inc.

This VOC monitor is designed for passive and active ambient air quality monitoring of volatile and semi-volatile organic compounds in the range C2-C28. The tube can be used as a passive monitor for time weighted average concentrations or for pumped sampling (active monitor) for workplace monitoring and comparison to health and safety workplace ...

AppliTek - Open-Path Gas Analyzers

by AppliTek NV - Environmental Analysis Division

Our multi-gas open-path analyzer system uses DOAS spectrometry to monitor toxic and combustible gases over a wide optical monitoring path. The system consists of one projector and one receiver in weatherproof housing, operates autonomously and is connected to a power supply and supervision computer. Solid state: a special low noise flat field ...

DIF100RTU-RA - Nitrogen Dioxide Passive Sampler

by Ormantine USA Ltd., Inc.

This nitrogen dioxide detector is designed for passive sampling gaseous molecules of nitrogen dioxide in ambient air. Diffusion sampling of ambient air pollution involves low cost air quality instruments. Nitrogen dioxide gas detection, for example from traffic emission, may be an important aspect of emissions modelling exercises or dispersion ...

Need help finding the right suppliers?

Let the XPRTs do the work for you