The Tekran Model 1304 Air Filtration System is an inexpensive, convenient conditioning unit for plant compressed air. The Series 3300 Mercury CEM requires two types of air in order to operate. Motive air is required to drive the inertial filter sample flow via an eductor. Zero Air is used for dilution and for the generation of calibration gas. ...
VANGUARD Ammonia Abatement Systems are designed to remove ammonia from either a liquid waste stream or from a vapor exhaust. At the heart of the VANGUARD System is our unique catalytic treatment device. The VANGUARD System incorporates unique features that allow for Ammonia removal from air streams with a very small percentage of NOx formation. ...
The Procal 1000 Analyser Control Unit (ACU) controls and processes the raw data from up to six Procal Continuous Emission Monitoring systems and generates, displays and transmits concentration readings in customer specified units.
The Model T200 NO/NO2/NOx analyser uses the proven chemiluminescence detection principle, coupled with state-ofthe-art electronics to allow accurate and dependable low level measurements for use as an ambient analyser or dilution CEMS monitor.
The Model T200 NO/NO2/NOx analyzer uses the proven chemiluminescence detection principle, coupled with state-of-the-art electronics to allow accurate and dependable low level measurements for use as an ambient analyzer or dilution CEMS monitor.
CONCORD CONOx Abatement Systems are custom engineered NOx and/or CO abatement system in one modular package. The CONCORD is a unique abatement device designed as a combined selective catalytic reduction (SCR) NOx abatement system and CO abatement System in one convenient and integrated package.
On stack, in-situ oxygen analysis. Low cost probe with heated ZrO2 sensor, for dusty or clean combustion using the flow guidance (hollow) tube, with or without back-purge and different lengths.
Using heated ZrO2 sensor for wet O2 analysis up to 1110°F (600°C) flue gas temperature. With optional special heated solid electrolyte sensor for combustibles measurement.
Remote transmitter probe. In-situ probe with heated ZrO2 sensor for wet O2 analysis up to 1830°F (1000°C) using the flow guidance (hollow) tube and remotely mounted transmitter.
High temperature probe. In-situ probe with heated ZrO2 sensor for wet O2 analysis up to 3090°F (1700°C), using ejector for sample aspiration through Kanthal or Ceramic tube and remotely mounted transmitter.