continuous emissions monitoring systems enclosures Equipment

15 Results found
  • Category: Air & Climate ×

  • Subcategory: Air Monitoring ×

  • Keyword: continuous emissions monitoring systems enclosures ×

MRU - Model SWG 300-1 - Emission Monitoring Systems

by MRU Instruments, Inc.     based in Houston, TEXAS (USA)

CEMS based on cold&dry extractive technolgy. Using complete gas sample conditioning system (heated probe filter, heated sampling line, gas cooler etc) and NDIR or GFCIR measurement for up to 6 flue gas components (O2, CO, CO2 , NO, SO2, HC). Also suitable for installations in hazardous area zone 2 (class 1, div 2), with manufacturer ...

Model MIR-FTIR - Continuous Emission Monitoring Systems (CEMS)

by a1-cbiss     based in Birkenhead, UNITED KINGDOM

Measurement Technique: Installed across the majority of the UK’s municipal waste incinerators, the MIR-FT Utilises Fourier Transform Infra-Red (FT-IR) to offer multiple gas measurements simultaneously, including NO, NO2, SO2, NH3, HCl and CO. With the emissions limits tightening and new gases being introduced, this instrument allows future ...

PCME - Model QAL 181 - Particulate Measurement Systems

by PCME Ltd     based in St Ives, UNITED KINGDOM

The PCME QAL 181 is an approved Particulate Continuous Emission Monitor (CEM) providing high quality emission measurement for low dust concentrations from industrial processes, especially in Incineration, Power Plant and Cement Kiln applications. The instrument provides a proven solution for applications where CEN standards EN 14181 / EN 13284-2 ...

IntelliCEMS - Model IC Series - Straight Extraction Or Dilution Extraction Systems

by Cemtrex Inc.     based in Farmingdale, NEW YORK (USA)

The IC Series IntelliCEMSTM include straight extraction or dilution extraction systems complete with sample probes, heated sample bundles, sampling systems, analyzers, and Data Acquisition Systems (DAS). Our CEMS are pre-engineered and packaged to measure a wide range of gases and pollutants for compliance with state and federal EPA regulations ...

Lowe Engineering - Gas Sample / Detection Analysis

by Lowe Engineering Limited     based in Leeds, UNITED KINGDOM

The following extract from Perry's Chemical Engineers' Handbook, will give some insight into the sampling and analysis of Hydrocarbons.

OFS - Model 2000W - Optical Flow Sensor [with AGC]

by Optical Scientific Inc. (OSi)     based in Gaithersburg, MARYLAND (USA)

The OFS 2000-W model is equipped with Auto    matic Gain Control (AGC) to compensate for variations in opacity caused by particulate matter or moisture carried in the stack flow. The OFS uses EPA Method 14 optical scintillation technology with Digital Signal Processing (DSP) electronics to provide highly accurate, path-averaged air ...

Model 2812D-HT - Compact, High Temperature Sample Pump

by J.U.M. Engineering GmbH     based in Karlsfeld, GERMANY

The 2812D-HT is a very compact, High Temperature Sample Pump. All parts which come in contact with sample are made of 316 stainless steel to withstand corrosive gasses as they can become present in standard stack gas emission. The drive mechanism has been designed for a very smooth, low vibration, continuous and silent operation. The pump heads ...

Model 2812D - Compact Sample Pump

by J.U.M. Engineering GmbH     based in Karlsfeld, GERMANY

The 2812D is a very compact sample pump. It is made of 316 stainless steel to withstand the corrosive gasses as they can become present in a typical stack gas emission test. The drive mechanism is designed for a very smooth, low vibration, silent and continuous operation . The pump drive mechanism and motor have been designed for continuous, ...

OFS - Model 2000C - Flow Sensor for Combustion Air

by Optical Scientific Inc. (OSi)     based in Gaithersburg, MARYLAND (USA)

Is our latest refinement in a proven system - but we have developed it for combustion inflow! It can operate alone, or in combination with an OFS 2000 model mounted at the stack offering plant operators unprecedented accuracy in monitoring the combustion process. Whether coal, oil, or natural gas - the OFS 2000C offers increased efficiency, ...

Model 2825PD - Compact Compressor or Sample Pump

by J.U.M. Engineering GmbH     based in Karlsfeld, GERMANY

The 2825PD is a very compact compressor or sample pump. The two pumping modules are made of 316 Stainless Steel with aluminum heads as a compressor or made from 316S stainless steel. The dual head design provides a high medium flow of approx. 25 liter per minute when configured parallel. Both pump modules can also be used as used as individual ...

Need help finding the right suppliers?

Let the XPRTs do the work for you