flue gas monitoring Equipment in Latin America

25 Results found
  • Category: Air & Climate ×

  • Subcategory: Air Monitoring ×

  • Keyword: flue gas monitoring ×

  • Location: Latin America ×

Model VCEM5100 - Flue Gas Flow Monitor

by Codel International Ltd

Continuous on-line analysis often only considers the density of the emissions (e.g mg/Nm3) In order to obtain a measurement of total emissions for pollution monitoring (e.g kg/hr) it is necessary to either calculate or measure flow within the gas stream. The VCEM5100 provides non-contact measurement of gas velocity using a time-delay correlation ...

Model VCEM5000 - Flue Gas Flow Monitor

by Codel International Ltd

Continuous emission monitoring often only considers the density of the emissions (e.g mg/Nm3) In order to obtain a measurement of total emissions for pollution monitoring (e.g kg/hr) it is necessary to either calculate or measure flow within the gas stream. The VCEM5000 provides non-contact measurement of gas velocity using a time-delay ...

Sprint-V - Flue Gas Analysers - Multifunction

by Telegan Gas Detection

Using the latest technology the Sprint V range of multifunction flue gas analysers allow heating engineers to test boilers to optimise servicing and efficiency and to assess the integrity and safety of gas installations and heating systems. Sprint V products can offer up to six functional tests as follows: Flue Gas Analysis for combustion ...


PCME - Model STACK 181 WS - Particulate Measurement Systems

by PCME Ltd

The PCME STACK 181 WS is suitable for measuring particulate emissions from wet scrubbers and other processes where the flue gas falls below dew point (cold stack conditions) or water droplets are present. The extractive instrument takes a representative continuous sample from the stack, heats this well above dew point to evaporate water droplets ...

IMR - Model 1440 FL/FLCO - Forklift Emissions

by IMR Environmental Equipment, Inc.

Portable, continuous measuring flue gas analysis instrument housed in an aluminum case for measuring air temperature, flue gas temperature, Oxygen O2, Carbon monoxide CO (H2 comp.), Nitric oxide NO, losses, excess air, combustion efficiency, draft, Carbon dioxide CO2 and soot. Simultaneous display of eight measured parameters on the illuminated ...

PCME - Model STACK 980 - Particulate Continuous Emission Monitor

by PCME Ltd

The PCME STACK 980 is an approved Particulate Continuous Emission Monitor suited to industrial applications in stacks after bag filters, cartridge filters, cyclones and process driers. The instrument combines the latest regulatory approvals (MCERTS Performance Standards for Automated Dust Arrestment-Plant Monitors, version 1 (August 2010), class 2 ...

IMR - Model 1400P/PL/PS - 2-4 Cell Flue-Gas Analyzer for the Professional

by IMR Environmental Equipment, Inc.

Measures: O2, CO, NO, NO2 (SO2); draft/pressure; soot; Flue-gas and ambient temperature. Calculates:CO2, combustion efficiency, heat losses, excess air, CO corrected. Comes standard with gas-sampling probe, condensation trap, rugged case,battery, printer, CO-bypass, serial interface, memory, 12VDC.

Kitagawa - Gas Detector Tube System

by Euro-Gas Management Services Ltd

The Komyo Kitagawa Gas Detector Tube System is an accurate and cost effective spot gas detector sampling system, offering over 300 gas detector tubes, from Ammonia to Xylene.The Kitagawa Gas Detector Tube System consists of a pump and glass detector tubes. The tubes are filled with an absorbent material and chemical reagent which, when in the ...

MRU - Model SWG 300-1 - Emission Monitoring Systems

by MRU Instruments, Inc.

CEMS based on cold&dry extractive technolgy. Using complete gas sample conditioning system (heated probe filter, heated sampling line, gas cooler etc) and NDIR or GFCIR measurement for up to 6 flue gas components (O2, CO, CO2 , NO, SO2, HC). Also suitable for installations in hazardous area zone 2 (class 1, div 2), with manufacturer ...

IMR - Model 1400-IR - 3-4 Cell Flue-Gas Analyzer (Measures CO2)

by IMR Environmental Equipment, Inc.

Measures: CO2 (NDIR), O2, CO, NO, NO2 (SO2); draft/pressure; soot; Flue-gas and ambient temperature. Calculates:Combustion efficiency, heat losses, excess air, CO corrected. Comes standard with gas-sampling probe, condensation trap, rugged case,battery, printer, CO-bypass, serial interface, memory, 12VDC.

Related Terms for flue gas monitoring

Need help finding the right suppliers?

Let the XPRTs do the work for you