gas dilution calibrator Equipment in Northern Ireland

Serving Northern Ireland | Near Northern Ireland
25 Results found
  • Category: Air & Climate ×

  • Subcategory: Air Monitoring ×

  • Keyword: gas dilution calibrator ×

  • Location: Europe ×

  • Location: Northern Ireland ×

IONICON - Gas Calibration Unit (GCU) - Advanced Dynamic Gas Dilution System

by Ionicon Analytik Ges.m.b.H.     based in Innsbruck, AUSTRIA

For most trace gas analyzers, calibration is the standard practice to ensure accurate quantification of target substances. The IONICON GCU has been developed to produce precisely controlled concentrations at trace levels with the possibility to adjust the gas matrix humidity and CO2 content for calibration at sample gas conditions. GCU has been ...

Sonimix - Model 2106 PreDivider - Binary Gas Calibration System

by LNI Swissgas     based in Chatelaine-Geneva, SWITZERLAND

The binary Predivider Sonimix 2106 is based on the principle of gas stream through sonic nozzles and is built according to the ISO 6145/6 normalization. Most accurate device on the market (0.5% rel.) The Sonimix 2106 PreDil is mainly used to increase the dilution range of the Sonimix 2106 or 7000 gas dividers.

Sonimix - Model 3014 - Permeation Gas Calibration Systems

by LNI Swissgas     based in Chatelaine-Geneva, SWITZERLAND

All those which cannot or hates transporting gas cylinders will appreciate the Sonimix 3014. Based on mass flow controller, critical orifices (nozzles) and high stability mechanical pressure regulators, the Sonimix 3014 is able to generate gases such as NO2 or SO2 using dilution or permeation technology. No cylinders, Accurate, Flexible and ...

Sonimix - Model 3030 - Gas Calibration Systems

by LNI Swissgas     based in Chatelaine-Geneva, SWITZERLAND

The SONIMIX 3030 is a calibration system, specially developed for simple applications.

Sonimix - Model 3012/3022 - Gas Calibration Systems

by LNI Swissgas     based in Chatelaine-Geneva, SWITZERLAND

The multigas calibrator with GPT, ozone and self re‐generable zero air generator, Sonimix 3012/3022, is an instrument designed to calibrate manually or by remote control up to 6 monitors installed in an air pollution monitoring station, such as SO2, HC, BTX, CO, NOx and O3.

Sonimix - Model 6000 C2 - Station Calibration Systems

by LNI Swissgas     based in Chatelaine-Geneva, SWITZERLAND

The Sonimix 6000 C2 is the station calibration system per excellence. The multigas Mass Flow controller calibrator with GPT, ozone and self regenerable zero air generator, Sonimix 6000 C2, is an instrument designed to calibrate manually or by remote control up to 6 monitors installed in an air pollution monitoring station, such as SO2, HC, BTX, ...

Sonimix - Model 6000 C1 - Multipoint Multigas Calibrator

by LNI Swissgas     based in Chatelaine-Geneva, SWITZERLAND

Due to its permeation tubes this instrument is appreciated in the area where the supplying in gas cylinder is difficult or complicated. The Multipoint Multigas Calibrator Sx 6000C1 is an instrument designed to calibrate manually or by remote control up to 5 gas monitors installed in an Air pollution monitoring station, such as SO2, HC or BTX, CO, ...


CALIB - Internal or External Calibrator

by Chromatotec Group     based in Val de Virvée, FRANCE

We propose a range of calibration systems with permeation tubes installed inside an analyzer or a multiplexer. In option, we can provide these calibration systems in a separate box. Our analyzers can control the solenoide vanne selection of a standard gas cylinder.

MCZ - Model CMK5 - Calibration System

by Umwelttechnik MCZ GmbH     based in Bad Nauheim, GERMANY

The calibration system serves the mandatory zero and end point verification of gas analyzers, especially those in automated measuring networks. The zero and end points are verified with a signal from the measuring network computer; the calibration can also be activated with the keyboard at the front of the CMK.

MCZ - Model MK5 / MK10 - Calibration System

by Umwelttechnik MCZ GmbH     based in Bad Nauheim, GERMANY

The calibration system MK5/MK10 is equipped with standard modules for the different methods of generating span gas based on the specific application. The generated span gas is provided depressurized for output. The MK5 series can be equipped with max. 5, the MK10 series with max. 10 modules. Used to calibrate gas analyzers in labs, service ...

Related Terms for gas dilution calibrator

Need help finding the right suppliers?

Let the XPRTs do the work for you