gas dilution calibrators Equipment

52 Results found
  • Category: Air & Climate ×

  • Subcategory: Air Monitoring ×

  • Keyword: ×

Model AF22M - Sulfur Dioxide Analyzer

by Norditech Pty Ltd     based in Arndell Park, AUSTRALIA

UV Fluorescence Sulfur Dioxide (SO2) analyzer 'EN' Series. TÜV & US EPA approved. Low level monitoring of sulfur dioxide (SO2) from 1 ppb to 10 ppm. Ultra compact and lightweight – rackable 19'/3U. UV fluorescence technology. SMD enhanced electronics. USB and TCP/IP connectivity (option).

TAPI - Model 900 - Air Quality Monitoring Systems

by Teledyne Advanced Pollution Instrumentation (TAPI)     based in San Diego, CALIFORNIA (USA)

Teledyne API has a complete combination of particulate gas analyzers, and calibrators which can be integrated into ambient air quality systems (AQMS) or continuous emissions monitoring systems (AQMS).

Model Sx 6000 C1 - Multipoint Multigas Calibrator

by LNI Schmidlin SA     based in Chatelaine-Geneva, SWITZERLAND

The SONIMIX 6000C1 is equipped with an interface designed to be directly compatible with the Data Acquisition stations with the ISO7168 protocol, or with the analysers. That feature allows in Remote mode, to receive and to interpret for each gas, the instructions MEASURE, ZERO and CALIBRATION. In Local mode, the interface allows to Configure the ...

Tekran - Model 3342 - Sample Probes & Conditioning

by Tekran Instruments Corporation     based in Knoxville, TENNESSEE (USA)

The Tekran 3342 is a customized version of an M&C Dilution Probe (Model SP2006-Hg). M&C probes are the industry standard and are well-known for their dependability and ease of servicing. The probe uses a titanium sintered filter to remove particulate matter from the sample stream. The sample is diluted and sent to the conditioner via a ...

MCZ - Model MK5 / MK10 - Calibration System

by Umwelttechnik MCZ GmbH     based in Bad Nauheim, GERMANY

The calibration system MK5/MK10 is equipped with standard modules for the different methods of generating span gas based on the specific application. The generated span gas is provided depressurized for output. The MK5 series can be equipped with max. 5, the MK10 series with max. 10 modules. Used to calibrate gas analyzers in labs, service ...

Teledyne - Model ML675 - Dilution-Extractive System

by Teledyne Monitor Labs, Inc.     based in Englewood, COLORADO (USA)

The Teledyne ML675 dilution-extractive system can be used in 40CFR75, 40CFR60, and process control applications. In this system, sample is prepared for analysis by diluting stack gas with clean, dry instrument air at the probe location. Since no moisture is removed with dilution, measurements for SO2, NOx, CO, THC and CO2 are made on a wet basis.

Environnement S.A. - Model MGC 101 - Multi-gas Calibrator for Ambient Air Gas Analyzers

by Environnement S.A     based in Poissy, FRANCE

Multi-gas calibrator for ambient air gas analyzers; Automatic calculation of dilution and span gas flows, based on commanded concentration, eliminates the need for any manual computation and allows rapid transition from point to point. Internally-stored mass flow controller calibration data improves accuracy (factor of ten) and simplifies field ...

Model CO12M - Carbon Monoxide Analyzer

by Norditech Pty Ltd     based in Arndell Park, AUSTRALIA

Infra Red GFC Carbone Monoxide (CO) Analyzer 'EN' Series. TÜV & US EPA approved; Low level monitoring of CO from 50 ppb to 200 ppm. Ultra compact and lightweight – rackable 19'/ 3U. Infra red GFC technology. SMD enhanced electronics. USB & TCP/IP connectivity (option). Optional measurement of CO2.

CEMSentry - Model 3000 - Continuous Emission Monitoring System

by CEM Service Group, Inc.     based in Bedminster, PENNSYLVANIA (USA)

TheCEMSentry™3000 is a state-of-the-art, Continuous Emissions Monitoring System (CEMS) that utilizes a variety of analytical techniques specific to the gases to be monitored and specialized sample transport and conditioning equipment designed for each specific application. The CEMSentry™3000 CEMS is

Model C012M - IR Gas Filter Correlation Carbon Monoxide Analyzer

by Envitech Bohemia s.r.o.     based in Prague 6, CZECH REPUBLIC

The new NDIR CFC (Non Dispersive InfraRead Gas Filter Correlation) carbon monoxide analyzer, model C012M, combines over 20 years of experience in the NDIR CO measurement with an enhanced electronics package and a modular component parts design. The outcome is an ultra compact and light- rack 3U, easy-to-use, IR CFC based analyzer able to measure ...

Need help finding the right suppliers?

Let the XPRTs do the work for you