gas dilution calibrators Equipment in Northern Ireland

Serving Northern Ireland | Near Northern Ireland
26 Results found
  • Category: Air & Climate ×

  • Subcategory: Air Monitoring ×

  • Keyword: ×

  • Location: Europe ×

  • Location: Northern Ireland ×

MCZ - Model CMK5 - Calibration System

by Umwelttechnik MCZ GmbH     based in Bad Nauheim, GERMANY

The calibration system serves the mandatory zero and end point verification of gas analyzers, especially those in automated measuring networks. The zero and end points are verified with a signal from the measuring network computer; the calibration can also be activated with the keyboard at the front of the CMK.

Model DMS - Long Term Emissions Sampling

by AquaGas Pty Ltd     based in CURRUMBIN, AUSTRALIA

Sampling of Dioxins, POPs, Fine Dust PM10, PM2.5, PM1 (with standard combined PUF, filter and impactors). The DMS is suitable for long term monitoring of persistent organic pollutants like dioxins and it is the best suitable device to EN 1948-1 worldwide. In 2004 and 2005 the device was improved to version G20, which was tested and certified by ...

MCZ - Model MK5 / MK10 - Calibration System

by Umwelttechnik MCZ GmbH     based in Bad Nauheim, GERMANY

The calibration system MK5/MK10 is equipped with standard modules for the different methods of generating span gas based on the specific application. The generated span gas is provided depressurized for output. The MK5 series can be equipped with max. 5, the MK10 series with max. 10 modules. Used to calibrate gas analyzers in labs, service ...

MCZ - Model MK5 BNT - Modular Calibration System

by Umwelttechnik MCZ GmbH     based in Bad Nauheim, GERMANY

Modular calibration system primarily designed as transfer standard to synchronize analyzers in different measuring stations. Transport of the span gas cylinders normally used as transfer standard is unnecessary when using a permeation oven.

Tekran - Model 3342 - Sample Probes & Conditioning

by Tekran Instruments Corporation     based in Knoxville, TENNESSEE (USA)

The Tekran 3342 is a customized version of an M&C Dilution Probe (Model SP2006-Hg). M&C probes are the industry standard and are well-known for their dependability and ease of servicing. The probe uses a titanium sintered filter to remove particulate matter from the sample stream. The sample is diluted and sent to the conditioner via a ...

Environnement S.A. - Model MGC 101 - Multi-gas Calibrator for Ambient Air Gas Analyzers

by Environnement S.A     based in Poissy, FRANCE

Multi-gas calibrator for ambient air gas analyzers; Automatic calculation of dilution and span gas flows, based on commanded concentration, eliminates the need for any manual computation and allows rapid transition from point to point. Internally-stored mass flow controller calibration data improves accuracy (factor of ten) and simplifies field ...

Sonimix - Model 6000 C2 - Fixed Gas Calibrators

by LNI Schmidlin SA     based in Chatelaine-Geneva, SWITZERLAND

The SONIMIX 6000 C2 is the station calibration system per excellence.

Environics - Model Series 2000-U - Ultraclean Computerized Calibration System

by Environics, Inc.     based in Tolland, CONNECTICUT (USA)

Purity of calibration gas is assured with the Series 2000 Ultraclean Gas Calibration system. Manufactured with metal seal Mass Flow controllers and orbitally welded joints, this system has minimal dead volume and maintains an ultra-low leak rate to prevent atmospheric contamination of gas calibration standards.

Environics - Model Series 9100 - Ambient Monitoring Calibration System

by Environics, Inc.     based in Tolland, CONNECTICUT (USA)

The Environics Series 9100 Computerized Ambient Monitoring Calibration System is an advanced microprocessor controlled instrument for dynamic calibration of ambient air analyzers.The Environics 9100 is the unit of choice in the Air Quality Monitoring Programs of the EPA and California Air Resource Board (CARB). The Series 9100 can house up to ...

Environnement S.A. - Model CO12M - Gas Filter Correlation Carbon Monoxide Analyzer

by Environnement S.A     based in Poissy, FRANCE

Infra Red GFC Carbone Monoxide (CO) Analyzer 'EN' Series. TÜV & US EPA approved; Infra red GFC technology for low level monitoring of CO from 0 to 200 ppm. Ultra compact and lightweight – rackable 19'/ 3U. Option: CO2 (max 3000 ppm) / CH4 (max 300 ppm) measurement. NEW: Built-in serial interface (RS 232 / RS 422), USB & TCP/IP ...

Need help finding the right suppliers?

Let the XPRTs do the work for you