gas dilution calibrators Equipment in Tajikistan

Serving Tajikistan | Near Tajikistan
41 Results found
  • Category: Air & Climate ×

  • Subcategory: Air Monitoring ×

  • Keyword: ×

  • Location: Asia & Middle East ×

  • Location: Tajikistan ×

Model Sx 6000 C1 - Multipoint Multigas Calibrator

by LNI Schmidlin SA     based in Chatelaine-Geneva, SWITZERLAND

The SONIMIX 6000C1 is equipped with an interface designed to be directly compatible with the Data Acquisition stations with the ISO7168 protocol, or with the analysers. That feature allows in Remote mode, to receive and to interpret for each gas, the instructions MEASURE, ZERO and CALIBRATION. In Local mode, the interface allows to Configure the ...

TAPI - Model 701 - Zero Air System

by Teledyne Advanced Pollution Instrumentation, Inc. (TAPI)     based in San Diego, CALIFORNIA (USA)

The Model 701 is an excellent source of clean, dry air for dilution calibrators. It also may be used as a source of purge air for permeation tube ovens or burner air for FID analyzers.

Tekran - Model 3342 - Sample Probes & Conditioning

by Tekran Instruments Corporation     based in Knoxville, TENNESSEE (USA)

The Tekran 3342 is a customized version of an M&C Dilution Probe (Model SP2006-Hg). M&C probes are the industry standard and are well-known for their dependability and ease of servicing. The probe uses a titanium sintered filter to remove particulate matter from the sample stream. The sample is diluted and sent to the conditioner via a ...

TAPI - Model T700H - Source Monitoring Dilution Calibrator

by Teledyne Advanced Pollution Instrumentation, Inc. (TAPI)     based in San Diego, CALIFORNIA (USA)

The Model T700H is a microprocessor controlled dilution system for calibration of continuous emissions monitoring gas analyzers. It enables significantly reduced cylinder use and cost while improving on-site flexibility for gas concentrations and converter efficiency checks. The instrument is designed to meet or exceed the performance requirements ...

Model E4400 - Emissions Analyzer

by Keika Ventures, LLC (KV)     based in Chapel Hill, NORTH CAROLINA (USA)

The E4400 is a NEW hand-held industrial gas analyzer that is a valuable tool designed for emissions monitoring and maintenance & tuning of combustion processes including boilers, burners, gas & diesel engines, turbines, furnaces, kilns, heaters, and laboratory analysis.

Teledyne - Model ML675 - Dilution-Extractive System

by Teledyne Monitor Labs, Inc.     based in Englewood, COLORADO (USA)

The Teledyne ML675 dilution-extractive system can be used in 40CFR75, 40CFR60, and process control applications. In this system, sample is prepared for analysis by diluting stack gas with clean, dry instrument air at the probe location. Since no moisture is removed with dilution, measurements for SO2, NOx, CO, THC and CO2 are made on a wet basis.

Industrial Emissions Analyzer (CO, CO2, H2O, O2)

by Los Gatos Research     based in Mountain View, CALIFORNIA (USA)

LGR’s new Industrial Emissions Analyzer (CO, CO2, H2O, O2), IEA, is the world’s first laser-based instrument capable of simultaneous measurements of carbon monoxide, carbon dioxide, water vapor and oxygen. The IEA is simple to use, sensitive, and rugged which makes it ideal for continuous emissions monitoring, industrial process ...

IntelliCEMS - Model IC Series - Straight Extraction Or Dilution Extraction Systems

by Cemtrex Inc.     based in Farmingdale, NEW YORK (USA)

The IC Series IntelliCEMSTM include straight extraction or dilution extraction systems complete with sample probes, heated sample bundles, sampling systems, analyzers, and Data Acquisition Systems (DAS). Our CEMS are pre-engineered and packaged to measure a wide range of gases and pollutants for compliance with state and federal EPA regulations ...

MCZ - Model MK5 / MK10 - Calibration System

by Umwelttechnik MCZ GmbH     based in Bad Nauheim, GERMANY

The calibration system MK5/MK10 is equipped with standard modules for the different methods of generating span gas based on the specific application. The generated span gas is provided depressurized for output. The MK5 series can be equipped with max. 5, the MK10 series with max. 10 modules. Used to calibrate gas analyzers in labs, service ...

Environics - Model Series 2020 CEMCS - Continuous Emissions Monitoring Calibration System

by Environics, Inc.     based in Tolland, CONNECTICUT (USA)

The Environics Series 2020 Continuous Emissions Monitoring Calibration System (CEMCS) automatically generates precise gas standards for rapid multi-point and multi-scale calibration of Continuous Emissions Mon

Need help finding the right suppliers?

Let the XPRTs do the work for you