industrial gases Equipment in North Dakota

161 Results found
  • Category: Air & Climate ×

  • Subcategory: Air Monitoring ×

  • Keyword: industrial gases ×

  • Location: USA ×

  • Location: North Dakota ×

Tekran - Model 2600-NG - Mercury Analyzer For Natural Gas and Industrial Hygiene

by Tekran Instruments Corporation

The Tekran Model 2600-NG Mercury Analyzer is designed for the analysis of gas phase sample cartridges. The system contains an atomic fluorescence detector, a dual stage thermal desorber and a data acquisition & control system. A single serial connection allows a Windows based PC to control the entire analysis process, acquire the detector ...

Industrial Cylinder Gases

by Weldstar Inc

Whether you are in the construction, fabrication or manufacturing industry, you can count on Weldstar to help you find the correct gas for your industrial application. As one of the top industrial gas suppliers in our region, Weldstar has the knowledge and experience vital to your industry. Each of our facilities in the Chicago and Northern ...

Apex Instruments - Model SGC-4000HG - Stirling Gas Cooler

by Apex Instruments, Inc.

The Apex Instruments SGC-4000HG Stirling Gas Cooler is specially designed for removing moisture and acid gases from flue gas samples. This new gas cooler uses an industrial grade super efficient Free Piston Stirling Cooler (FPSC) for chilling the sample gas to remove moisture. The Stirling will provide a robust, closed, dual channel gas ...

Harzardous Gas Monitoring

by Htec Systems Inc.

Htec designs and manufactures industrial grade Toxic Gas Monitoring Systems, which include fixed monitors, gas chromatographs and mass spectrophotometers. A monitoring system would be needed for a situation in which plant personnel are working in or periodically entering a room with a process or a storage container that contains one or more of the ...

Max-Trak - Model 180 - Industrial Mass Flow Controller

by Sierra Instruments, Inc.

MaxTrak is a family of industrial gas mass flow instruments from the company that has been a trusted name in industrial thermal mass flow meters for decades—Sierra Instruments. MaxTrak will measure and control any clean, dry gas mass flow from 10 to 1000 SLPM, with lower flows and higher flows available upon request.

MIDAC - Model I Series - Industrial Gas Analyzers

by MIDAC Corporation

For years, MIDAC has provided customized solutions for demanding gas analysis applications. This accumulated experience uniquely qualifies us to provide 'total solutions' for virtually any gas analysis need - from environmental to industrial process applications. The versatility of I-Series gas analysis systems enables us to work with you to ...

AppliTek - Industrial FTIR Gas Analyzers

by AppliTek NV - Environmental Analysis Division

The On-line FTIR Extractive Process Analyzer is designed as a rugged gas analyzer for use in process monitoring and quality control of specialty gases. The fast-scanning, high-resolution Fourier Transform Infrared systems are perfect for extreme source matrices found in incineration and combustion processes. The system is most useful for ...

Model 3 Inch - Trash Pump Gas Powered

by Piranha Pumps & Dredges

Cheap trash pumps are not designed to withstand abrasion or shock. Cheap trash pumps usually utilize small diameter carbon/ceramic shaft seals. Carbon/ceramic is the cheapest seal material there is and is a strong indication that your pump is designed to pump water only. The shaft seal is the component that seals the engine shaft as it enters the ...

Innova-Switch - Flow Switch for Gases & Liquids

by Sierra Instruments, Inc.

Switches on a flow/no flow condition in both gases and liquids. Flow Switch range of 0.01 to 5 sfps (.003 to 1.524 smps) in liquids and 0.1 to 500 sfps (.03 to 152.4 smps) gases. Response Time of 0.5 to 10 seconds (media dependent) Wide operating temperature range of -100F to +390F (-70C to 200C) CE, CENELEC and CSA approvals.

ChromaTCD - Model C41022 - Gas Analyser

by Chromatotec Group

The continuous mode permanent gases monitor. A highly automated system for routine field measurement of permanent gases on the range. The chromaTCD is an automatic industrial gas analyser. The sample comes through the sampling loop. Then the sample is injected into an analytical column for separation. The system uses packed or capillary column.

Need help finding the right suppliers?

Let the XPRTs do the work for you