mass flow calibrators Equipment in Myanmar

Serving Myanmar | Near Myanmar
32 Results found
  • Category: Air & Climate ×

  • Subcategory: Air Monitoring ×

  • Keyword: ×

  • Location: Asia & Middle East ×

  • Location: Myanmar ×

Model Sx 6000 C1 - Multipoint Multigas Calibrator

by LNI Schmidlin SA     based in Chatelaine-Geneva, SWITZERLAND

The SONIMIX 6000C1 is equipped with an interface designed to be directly compatible with the Data Acquisition stations with the ISO7168 protocol, or with the analysers. That feature allows in Remote mode, to receive and to interpret for each gas, the instructions MEASURE, ZERO and CALIBRATION. In Local mode, the interface allows to Configure the ...

MCZ - Model MK5 / MK10 - Calibration System

by Umwelttechnik MCZ GmbH     based in Bad Nauheim, GERMANY

The calibration system MK5/MK10 is equipped with standard modules for the different methods of generating span gas based on the specific application. The generated span gas is provided depressurized for output. The MK5 series can be equipped with max. 5, the MK10 series with max. 10 modules. Used to calibrate gas analyzers in labs, service ...

Environnement S.A. - Model MGC 101 - Multi-gas Calibrator for Ambient Air Gas Analyzers

by Environnement S.A     based in Poissy, FRANCE

Multi-gas calibrator for ambient air gas analyzers; Automatic calculation of dilution and span gas flows, based on commanded concentration, eliminates the need for any manual computation and allows rapid transition from point to point. Internally-stored mass flow controller calibration data improves accuracy (factor of ten) and simplifies field ...

Xact - Model 625 - Metals Monitoring System - CES Ambient/Fence-Line Monitor (FLM)

by Enviro Technology Services plc     based in Stroud, UNITED KINGDOM

The CES Xact 625 system is designed for monitoring ambient air near the fence lines of industrial facilities and in complex urban environments, where particulate matter and metal concentrations are elevated. The system uses reel-to-reel (RTR) filter tape sampling and nondestructive X-ray fluorescence (XRF) analysis to monitor ambient air. The air ...

Thermo Scientific - Model 1405-F TEOM™ - Continuous Ambient Air Monitor

by Thermo Scientific - LC/MS GC GC/MS     based in MASSACHUSETTS (USA)

Take continuous direct measurements of PM-10, PM-2.5, and PM-1 particulates using the Thermo Scientific™ 1405-F TEOM™ Continuous Ambient Air Monitor. This monitor utilizes a tapered element oscillating microbalance (TEOM) and Filter Dynamics Measurement System (FDMS) to provide measurements with excellent short-term precision and ...

Model DFM - Digital GAS Mass Flow Meter

by Aalborg Instruments & Controls, Inc.     based in Orangeburg, NEW YORK (USA)

DFM programmable thermal mass flow meter with digital signal processing

HORIBA - Model APMA-370 - Ambient Carbon Monoxide Monitor

by HORIBA Europe GmbH     based in Leichlingen, GERMANY

The APMA-370 is a device for continuously monitoring CO concentrations using a Non-dispersion cross modulation infrared analysis method. The APMA-370 employs an independent, internal dry-method sampling device to achieve the highest levels of sensitivity and accuracy. The dry method, due to its capability for continuously monitoring and ...

Sonimix - Model 6000 C2 - Fixed Gas Calibrators

by LNI Schmidlin SA     based in Chatelaine-Geneva, SWITZERLAND

The SONIMIX 6000 C2 is the station calibration system per excellence.

Hiden - Model QIC Biostream Series - Multi-stream Gas Composition Monitoring System

by Hiden Analytical     based in Warrington, UNITED KINGDOM

A integrated mass spectrometer and selector valve system for multi-stream analysis. The Hiden QIC BioStream is a complete, multi-stream gas composition monitoring system.Capable of analysing gas streams at flow rates from 4 ml/min up to 10 L/min. The system is suited to a range of applications including fermentation off-gas analysis, biogas ...

MIDAC - Model I Series - Industrial Gas Analyzers

by MIDAC Corporation     based in Westfield, MASSACHUSETTS (USA)

For years, MIDAC has provided customized solutions for demanding gas analysis applications. This accumulated experience uniquely qualifies us to provide 'total solutions' for virtually any gas analysis need - from environmental to industrial process applications. The versatility of I-Series gas analysis systems enables us to work with you to ...

Need help finding the right suppliers?

Let the XPRTs do the work for you