mass flow calibrators Equipment in South Carolina

Serving South Carolina | Near South Carolina
36 Results found
  • Category: Air & Climate ×

  • Subcategory: Air Monitoring ×

  • Keyword: ×

  • Location: USA ×

  • Location: South Carolina ×

Model Sx 6000 C1 - Multipoint Multigas Calibrator

by LNI Schmidlin SA     based in Chatelaine-Geneva, SWITZERLAND

The SONIMIX 6000C1 is equipped with an interface designed to be directly compatible with the Data Acquisition stations with the ISO7168 protocol, or with the analysers. That feature allows in Remote mode, to receive and to interpret for each gas, the instructions MEASURE, ZERO and CALIBRATION. In Local mode, the interface allows to Configure the ...

MCZ - Model MK5 / MK10 - Calibration System

by Umwelttechnik MCZ GmbH     based in Bad Nauheim, GERMANY

The calibration system MK5/MK10 is equipped with standard modules for the different methods of generating span gas based on the specific application. The generated span gas is provided depressurized for output. The MK5 series can be equipped with max. 5, the MK10 series with max. 10 modules. Used to calibrate gas analyzers in labs, service ...

Environnement S.A. - Model MGC 101 - Multi-gas Calibrator for Ambient Air Gas Analyzers

by Environnement S.A     based in Poissy, FRANCE

Multi-gas calibrator for ambient air gas analyzers; Automatic calculation of dilution and span gas flows, based on commanded concentration, eliminates the need for any manual computation and allows rapid transition from point to point. Internally-stored mass flow controller calibration data improves accuracy (factor of ten) and simplifies field ...

INNOVA - Model 1313 - Photoacoustic Fermentation Monitor

by LumaSense Technologies GmbH     based in Frankfurt, GERMANY

LumaSense's Fermentation Monitor INNOVA 1313 simultaneously measures the concentrations of Oxygen and Carbon Dioxide in the exhaust gas from fermenters, providing data for calculation of the Respiratory Quotient (RQ). At the same time, the concentration of Hydrocarbons produced (for example Ethanol) can be measured. It can be integrated into ...

ATEC - Model 2200 - Toxic Air Sampler

by ATEC     based in Malibu, CALIFORNIA (USA)

The ATEC Models 2200 and 2200-2 Toxic Air Samplers are self-contained air sampling instruments that have been specifically designed to simultaneously collect air samples into canisters and sorbent cartridges for specified time periods. This provides the capability of obtaining both VOC and Carbonyl measurements at the same time with one ...

ATEC - Model 3400 - Toxic Air Sampler

by ATEC     based in Malibu, CALIFORNIA (USA)

The ATEC Model 3400 Toxic Air Sampler is designed to sample both toxic gases and particulates using one easy to use instrument.  The Model 3400 can be ordered with up to 4 sample channels. The sampler is ideally suited for use in the US EPA National Air Toxic Trends Station Program (NATTS), since it can simultaneously sample one canister, one ...

Hiden - Model QIC Biostream Series - Multi-stream Gas Composition Monitoring System

by Hiden Analytical     based in Warrington, UNITED KINGDOM

A integrated mass spectrometer and selector valve system for multi-stream analysis. The Hiden QIC BioStream is a complete, multi-stream gas composition monitoring system.Capable of analysing gas streams at flow rates from 4 ml/min up to 10 L/min. The system is suited to a range of applications including fermentation off-gas analysis, biogas ...

Model DFM - Digital GAS Mass Flow Meter

by Aalborg Instruments & Controls, Inc.     based in Orangeburg, NEW YORK (USA)

DFM programmable thermal mass flow meter with digital signal processing

HORIBA - Model APMA-370 - Ambient Carbon Monoxide Monitor

by HORIBA Europe GmbH     based in Leichlingen, GERMANY

The APMA-370 is a device for continuously monitoring CO concentrations using a Non-dispersion cross modulation infrared analysis method. The APMA-370 employs an independent, internal dry-method sampling device to achieve the highest levels of sensitivity and accuracy. The dry method, due to its capability for continuously monitoring and ...

F&J - Model Displayless Version - World Calibrator

by F&J SPECIALTY PRODUCTS, INC.     based in Ocala, FLORIDA (USA)

F&J SPECIALTY PRODUCTS, INC (F&J) has introduced a feature rich air flow service calibration system that are both PC interfaceable. One system is offered with a vacuum flourescent display and four button keypad and can be used as a standalone unit. The displayless version is designed to be connected to a PC. The F&J World Calibrator ...

Need help finding the right suppliers?

Let the XPRTs do the work for you