mass flow controllers Equipment in Austria

Serving Austria | Office in AustriaNear Austria
54 Results found
  • Category: Air & Climate ×

  • Subcategory: Air Monitoring ×

  • Keyword: ×

  • Location: Europe ×

  • Location: Austria ×

Model PRO902C Modular - External Low Flow Dilution Probe

by Thermo Scientific - Air Quality Instruments     based in Franklin, MASSACHUSETTS (USA)

PRO902C Probe handles the toughest environments while offering significant advantages over typical in-stack dilution probes.The dilution extractive technology in combination with the thermo-electric cooler provides accurate and concise readings available in both terms of concentration and mass-emission rates. aturing an O2 fuel cell for oxygen ...

Model Sx 6000 C1 - Multipoint Multigas Calibrator

by LNI Schmidlin SA     based in Chatelaine-Geneva, SWITZERLAND

The SONIMIX 6000C1 is equipped with an interface designed to be directly compatible with the Data Acquisition stations with the ISO7168 protocol, or with the analysers. That feature allows in Remote mode, to receive and to interpret for each gas, the instructions MEASURE, ZERO and CALIBRATION. In Local mode, the interface allows to Configure the ...

TAPI - Model 701 - Zero Air System

by Teledyne Advanced Pollution Instrumentation, Inc. (TAPI)     based in San Diego, CALIFORNIA (USA)

The Model 701 is an excellent source of clean, dry air for dilution calibrators. It also may be used as a source of purge air for permeation tube ovens or burner air for FID analyzers.

TAPI - Model T700H - Source Monitoring Dilution Calibrator

by Teledyne Advanced Pollution Instrumentation, Inc. (TAPI)     based in San Diego, CALIFORNIA (USA)

The Model T700H is a microprocessor controlled dilution system for calibration of continuous emissions monitoring gas analyzers. It enables significantly reduced cylinder use and cost while improving on-site flexibility for gas concentrations and converter efficiency checks. The instrument is designed to meet or exceed the performance requirements ...

Cyro Concentrator AutoSampler

by Wasson-ECE Instrumentation     based in Fort Collins, COLORADO (USA)

Wasson-ECE Instrumentation has developed a new cryo-concentrator for your environmental analysis needs. The system includes a built-in 16 position autosampler for sampling from SUMMA canisters and Tedlar bags. The samples are collected on a proprietary trap that is cooled by liquid nitrogen or liquid carbon dioxide. The system is ideal for TO14/15 ...

MCZ - Model MK5 / MK10 - Calibration System

by Umwelttechnik MCZ GmbH     based in Bad Nauheim, GERMANY

The calibration system MK5/MK10 is equipped with standard modules for the different methods of generating span gas based on the specific application. The generated span gas is provided depressurized for output. The MK5 series can be equipped with max. 5, the MK10 series with max. 10 modules. Used to calibrate gas analyzers in labs, service ...

Environics - Model Series 2020 CEMCS - Continuous Emissions Monitoring Calibration System

by Environics, Inc.     based in Tolland, CONNECTICUT (USA)

The Environics Series 2020 Continuous Emissions Monitoring Calibration System (CEMCS) automatically generates precise gas standards for rapid multi-point and multi-scale calibration of Continuous Emissions Mon

INNOVA - Model 1313 - Photoacoustic Fermentation Monitor

by LumaSense Technologies GmbH     based in Frankfurt, GERMANY

LumaSense's Fermentation Monitor INNOVA 1313 simultaneously measures the concentrations of Oxygen and Carbon Dioxide in the exhaust gas from fermenters, providing data for calculation of the Respiratory Quotient (RQ). At the same time, the concentration of Hydrocarbons produced (for example Ethanol) can be measured. It can be integrated into ...

Model TE-AS250D - Dichotomous Air Sampler

by Tisch Environmental Inc.     based in Cleves, OHIO (USA)

The dichotomous air sampler is a dual-filter air sampler for thesimultaneous collection of the fine PM2.5 and the coarse PM10-2.5particles contained within PM10. Split flow configuration of the virtualimpactor allows a PM10 aerosol to be separated into fine particles andcoarse particles for subsequent collection onto 2 separate PTFE ...

Gas Monitoring Enhancement

by ICM, Inc.     based in Colwich, KANSAS (USA)

ICM’s developed our exclusive gas controls monitoring enhancements to provide improved performance reliability for your ongoing operations. Not only do they reduce the consequences of mechanical or human error, they also improve performance reliability and decrease energy costs.

Need help finding the right suppliers?

Let the XPRTs do the work for you