opacity Equipment in Namibia

10 Results found
  • Category: Air & Climate ×

  • Subcategory: Air Monitoring ×

  • Keyword: opacity ×

  • Location: Africa ×

  • Location: Namibia ×

Model 445 - Compliance Opacity Monitoring System

by Thermo Scientific - Air Quality Instruments

The Model 445 is a robust dust concentration monitor for a broad range of applications. The instrument features automatic check cycles, built-in 4 point linearity check and contamination correction.

Soot-Trak - Real-Time Diesel Soot Mass

by Sierra Instruments, Inc.

The Sierra Instruments Soot-Trak laser measures real-time engine soot particle mass emissions and performs characterization of soot particle particle size, primary particle surface area and number. Soot-Trak provides researchers and engine developers the accurate information they require about particle transport. With measurement accuracy of 5% ...

OSi - Model WSS-300-DS - Tunnel Wind Speed And Smoke Sensor

by Optical Scientific Inc. (OSi)

For drift-free air flow measurements across traffic tunnels; WSS-300-DS calculates true average speed of air movement, and detects smoke. The sensor is equipped with Automatic Gain Control (AGC) to compensate for  opacity variations caused by particulates, smoke, or suspended moisture. The WSS-300-DS uses patented optical scintillation ...

OFS - Model 2000W - Optical Flow Sensor [with AGC]

by Optical Scientific Inc. (OSi)

The OFS 2000-W model is equipped with Auto    matic Gain Control (AGC) to compensate for variations in opacity caused by particulate matter or moisture carried in the stack flow. The OFS uses EPA Method 14 optical scintillation technology with Digital Signal Processing (DSP) electronics to provide highly accurate, path-averaged air ...

OFS - Model 2000C - Flow Sensor for Combustion Air

by Optical Scientific Inc. (OSi)

Is our latest refinement in a proven system - but we have developed it for combustion inflow! It can operate alone, or in combination with an OFS 2000 model mounted at the stack offering plant operators unprecedented accuracy in monitoring the combustion process. Whether coal, oil, or natural gas - the OFS 2000C offers increased efficiency, ...

OSI - Model OFS-2000 - Optical Flow Sensor (OFS)

by Optical Scientific Inc. (OSi)

OSi's patented Optical Flow Sensor (OFS) makes drift-free measurements across the entire stack, duct or pipe diameter and calculates an accurate average flow reading. It is the only flow sensor that gives a true non-contacting cross-stack flow measurement of the process. The OFS uses our EPA Method 14 approved optical scintillation technology. The ...

OSI - Model OFS-2000F - Optical Flow Sensor - F (OFS-F)

by Optical Scientific Inc. (OSi)

OSi's patented Optical Flow Sensor (OFS) makes drift-free measurements across the entire stack, duct or pipe diameter and calculates an accurate average flow reading. It is the only flow sensor that gives a true non-contacting cross-stack flow measurement of the process. The OFS uses our EPA Method 14 approved optical scintillation technology. The ...

Model EMS611 - Dust Monitor

by Environmental Monitor Service, Inc.

The EMS611 provides continuous, low maintenance, precision measurement of dust (mg/m3(N), Optical Density and Opacity. It is designed for monitoring visible smoke and particulate concentrations in the exhaust gas of industrial combustion or air filtration processes. The EMS611 dust monitor utilizes dual beam measurement and the highest quality ...

Teledyne - Model ML675 - Dilution-Extractive System

by Teledyne Monitor Labs, Inc.

The Teledyne ML675 dilution-extractive system can be used in 40CFR75, 40CFR60, and process control applications. In this system, sample is prepared for analysis by diluting stack gas with clean, dry instrument air at the probe location. Since no moisture is removed with dilution, measurements for SO2, NOx, CO, THC and CO2 are made on a wet basis.

IntelliCEMS - Model IC Series - Straight Extraction Or Dilution Extraction Systems

by Cemtrex Inc.

The IC Series IntelliCEMSTM include straight extraction or dilution extraction systems complete with sample probes, heated sample bundles, sampling systems, analyzers, and Data Acquisition Systems (DAS). Our CEMS are pre-engineered and packaged to measure a wide range of gases and pollutants for compliance with state and federal EPA regulations ...

Need help finding the right suppliers?

Let the XPRTs do the work for you