thermal mass flow controllers Equipment in Laos

Served | Office inNear
11 Results found
  • Category: Air & Climate ×

  • Subcategory: Air Monitoring ×

  • Keyword: thermal mass flow controllers ×

  • Location: Asia & Middle East ×

  • Location: Laos ×

SteelMass - Model 640S - Flow Meter

by Sierra Instruments, Inc.     based in Monterey, CALIFORNIA (USA)

Accurate monitoring of peak, low flow and total gas mass flow rates is a critical part of many industrial process control systems. If you need a portable analog or digital air flow meter that easily inserts into industrial ducts and pipes (up to 72 inches), choose Sierra Instruments SteelMass 640S.

Max-Trak - Model 180 - Industrial Mass Flow Controller

by Sierra Instruments, Inc.     based in Monterey, CALIFORNIA (USA)

MaxTrak is a family of industrial gas mass flow instruments from the company that has been a trusted name in industrial thermal mass flow meters for decades—Sierra Instruments. MaxTrak will measure and control any clean, dry gas mass flow from 10 to 1000 SLPM, with lower flows and higher flows available upon request.

Top-Trak - Model 822S & 824S - Low Cost Air Measurement Instruments

by Sierra Instruments, Inc.     based in Monterey, CALIFORNIA (USA)

Measuring air flow rate accurately with our TopTrak® models 822S and 824S has never been easier or more affordable!Similar in design to our popular, economical nylon mass flow meters, the 822S and 824S are ideal if you are looking for cost-efficient

Air-Trak - Model 628S - Thermal Mass Flow Meter

by Sierra Instruments, Inc.     based in Monterey, CALIFORNIA (USA)

Our AirTrak 628S Thermal Mass Flow Meter was originally designed to work specifically with our BG3 Particulate Partial Flow Sampling System as an extremely fast, accurate, and repeatable engine air intake mass flow meter. In addition, the instrument has proven to be an excellent solution in all engine testing applications.

Sensirion - Model SFM3000 - Low-Pressure Drop Flow Meter

by Sensirion AG     based in Staefa, SWITZERLAND

The SFM3000 is a digital flow meter especially suitable for high-volume applications. The design of the flow channel results in very low pressure drop through the sensor element, making it highly suitable for medical ventilation and respiration applications. The SFM3000 bidirectionally measures the flow of air and other non-aggressive gases at ...

Digital Self-checking Thermal Mass Flow Meter SMARTLINK Meter

by Maxon Corporation- a Honeywell Company     based in Muncie, INDIANA (USA)

Precise, repeatable mass flow measurement for fuel, air and combustion streams. Displays instantaneous standard rate and totalized flow without calculations. Advanced temperature compensation extends accuracy over wider ranges of fluid temperatures. Thermal mass flow technology provides reliable measurements with no moving parts. Thermal mass flow ...

Innova-Switch - Flow Switch for Gases & Liquids

by Sierra Instruments, Inc.     based in Monterey, CALIFORNIA (USA)

Switches on a flow/no flow condition in both gases and liquids. Flow Switch range of 0.01 to 5 sfps (.003 to 1.524 smps) in liquids and 0.1 to 500 sfps (.03 to 152.4 smps) gases. Response Time of 0.5 to 10 seconds (media dependent) Wide operating temperature range of -100F to +390F (-70C to 200C) CE, CENELEC and CSA approvals.

HORIBA - Model GPS5 - Gas Sampling System

by HORIBA Europe GmbH     based in Leichlingen, GERMANY

HORIBA gas samplers are suitable for volume-correct taking of gaseous samples during emission and emission measurements. This device can be used wherever gases and gaseous components must be inspected.

Tekran - Model 2600-NG - Mercury Analyzer For Natural Gas and Industrial Hygiene

by Tekran Instruments Corporation     based in Knoxville, TENNESSEE (USA)

The Tekran Model 2600-NG Mercury Analyzer is designed for the analysis of gas phase sample cartridges. The system contains an atomic fluorescence detector, a dual stage thermal desorber and a data acquisition & control system. A single serial connection allows a Windows based PC to control the entire analysis process, acquire the detector ...

Model 21-070 - Gas Leak Detector

by GOW-MAC Instrument Co.     based in Bethlehem, PENNSYLVANIA (USA)

The Model 21-070 GLD is a precision instrument designed to locate leaks in gas or volatile liquid filled systems in laboratory and industrial locations.

Related Terms for thermal mass flow controllers

Need help finding the right suppliers?

Let the XPRTs do the work for you