Air Monitoring Equipment in Botswana

2119 Results found
  • Category: Air & Climate ×

  • Subcategory: Air Monitoring ×

  • Location: Africa ×

  • Location: Botswana ×


NEW: VOC72M - The most compact and fully automated BTEX (Volatile Organic Compounds) analyser on the market,TÜV Certified

by Environnement S.A

The VOC72M, a key product of Environnement S.A (France) for the measurement of benzene, has obtained end of December the TÜV certification for ambient air monitoring. The analyser has passed successfully the laboratory and 3 months field investigations and found to comply with VDI 4202-1 : 2010, VDI 4203-3 : 2010, EN 14662-3 : 2005, EN 15267-1 : ...


Gradko - Acid Gas Diffusion Tubes

by Gradko International Ltd

This tube can simultaneously measure a range of acid gases – Hydrogen fluoride, Hydrogen chloride, Nitric acid, Hydrogen bromide, Phosphoric acid and Sulphuric acid (HF, HCl, HNO3, HBr, HPO4 and H2SO4).


HORIBA - SMA-371 - Datalogger

by HORIBA Europe GmbH

The HORIBA SMA-371 data logger can be used both, in the online and in the offline operating mode. In the online operating mode you attach the data logger directly to the serial interface of the PC. In this case only instantaneous values are processed. On the basis of the instantaneous values the further processing takes place in EDA-2000. If only ...


MCZ - MK2 - Calibration System

by Umwelttechnik MCZ GmbH

The calibration system serves the mandatory zero and end point verification of gas analyzers, especially those in automated measuring networks. The use of permeation tubes instead of bottled span gases yields a reasonably priced solution for the span gads generation of, for example, SO2 or hydrocarbon components.


DynOptic - DSL-220 MkIII - Single Pass Opacity Monitor for Monitoring Opacity and Smoke Emissions

by DynOptic Systems Ltd

The DSL-220 Opacity Monitor is an optical instrument designed to measure the visible opacity of exhaust gas in a duct, stack or flue.The DSL-220 uses the single pass light transmission measurement technique, with Transmitter/Receiver arrangement. A light beam emitted from the Transmitter passes across the stack to a Receiver, which measures the ...


Land - 4500 MkIII - Opacity and Dust Emissions Compliance Monitor

by Land Instruments International

The Land Model 4500 MkIII has reset the industry standard on compliance opacity and dust concentration measurement. Combining the unique features of three patented technologies, the 4500 MkIII achieves the highest available specification for the principal performance parameters, as defined by the internationally recognized ASTM Standard D 6216-07.


Environmental Sensors - Z-500 - Hand Held Carbon Monoxide Monitor Meter

by Environmental Sensors Company

Environmental Sensors Co.'s Carbon Monoxide Meter is a hand held instrument that measures carbon monoxide concentration in a range of 0-300 ppm and a resolution of 1 or 0.1 ppm. The instrument makes it possible to monitor carbon monoxide vapor in air. The insturment has an LCD display giving concentrations in ppm, a low battery indicator, and an ...


Environics - Gas Chromatography Calibration System

by Environics, Inc.

Environics Gas Mixers, Dilutors and Dividers have been the used in laboratories for over twenty years for applications including gas chromatography-mass spectrometry (GC-MS), GC with Flame Ionization Detector (GC-FID), and GC with thermal conductivity detector (GC-TCD). Our systems can produce gas concentrations from percent to ppb levels at the ...


ACME - REF-IR-(ST) - Refrigerant Leak Sensor/Controller

by Acme Engineering Prod. Ltd.

The ACME REF-IR-ST Sensor/Transmitter is designed to detect the presence of refrigerant leaks in enclosed areas. The REF-IR-ST series employs a high-precision NDIR sensor ideal for gas-specific and accurate measurements of the most commercially used refrigerants. With its 1PPM resolution, 0 to 1000PPM measuring range and operating temperature and ...

Genius 3013 Nitrogen Generator

by Peak Scientific Instruments Ltd

Specifically developed to support chip cube applications on the 6490 QQQ and 6550 Q-TOF mass spectrometers which demand a much higher gas flow. The Genius 3013 Nitrogen Generator is Peak Scientific’s proven solution for customers requiring a source of nitrogen which is switchable between standard LCMS grade Nitrogen and the 10% Oxygen rich ...

Need help finding the right suppliers?

Let the XPRTs do the work for you