gas controllers Equipment in Ukraine

Served | Office inNear
252 Results found
  • Category: Air & Climate ×

  • Subcategory: Air Pollution Control ×

  • Keyword: gas controllers ×

  • Location: Europe ×

  • Location: Ukraine ×

Model CP-60 1, 2 or 3 - Channel Wall Mount Controller

by ENMET Corporation     based in Ann Arbor, MICHIGAN (USA)

The CP-60 controller is designed for monitoring remote 4-20 mA gas sensor/transmitters or similar devices. The instrument provides 24 VDC power, audio/visual alarms, alarm relays and other features.

QEL - Model QAS-200 Series - Dual Channel Controllers

by Quatrosense Environmental Ltd. (QEL)     based in Richmond, ONTARIO (CANADA)

The QAS-200 Series Dual Channel Controller is a microprocessor based unit that monitors input signals and provides relay outputs for alarm and control. The units are switch selectable for either 4-20 mA DC input (standard) or broad spectrum solid state sensor inputs for hazardous gas detection.

MX-Series Enguard Controllers

by ENMET Corporation     based in Ann Arbor, MICHIGAN (USA)

These instrument control modules can be used to power and monitor a variety of 24 Vdc, 4-20 mA, sensor/transmitters. They can be connected to any combination of up to four(MX-42A) oxygen, toxic or combustible gas sensor/transmitters.

Touchpoint - Model 4 - Controller

by Honeywell Analytics     based in Hegnau, SWITZERLAND

A controller providing protection from flammable, toxic and Oxygen gas hazards, with up to 4 points of detection. The Touchpoint 4 controller provides protection of personnel and plant from flammable, toxic and Oxygen gas hazards when used with up to four Sensepoint gas detectors. Self-contained, fully user configurable and wall mounted, a ...

Model MX 15 - Controllers

by Oldham Gas - an Industrial Scientific Corporation Company     based in Arras Cedex, FRANCE

Designed for use in boiler rooms and parking garages, the new MX 15 controller provides the most cost effective solution for the continuous monitoring of toxic or flammable gases and vapors in ambient air.Easy to install and operate, the MX 15 control unit combined with the OLC(T) 10 detectors provides a low cost solution for light industrial ...

Smart Trak - Model 100 - Mass Flow Meters & Controllers

by Sierra Instruments, Inc.     based in Monterey, CALIFORNIA (USA)

SmartTrak 100 is the next generation of our flagship Model 100. Building upon unprecedented performance, user-friendliness and flexibility of innovative features like Dial-A-Gas capability and the Pilot Module interface, SmartTrak 100 gives users the world’s most linear sensor, smoother valve performance, more robust electronics and even ...

Micro-Trak - Model 101 - Ultra Low Flow Mass Flow Meters & Controllers

by Sierra Instruments, Inc.     based in Monterey, CALIFORNIA (USA)

As today's science and engineering focus more and more on micro technology, the requirement to be able to measure and control extremely low gas mass flows has become very important. With state-of-the-art sensor technology and highly engineered direct acting valve design, MicroTrak accurately measures and controls micro mass flows of gas previously ...

Max-Trak - Model 180 - Industrial Mass Flow Controller

by Sierra Instruments, Inc.     based in Monterey, CALIFORNIA (USA)

MaxTrak is a family of industrial gas mass flow instruments from the company that has been a trusted name in industrial thermal mass flow meters for decades—Sierra Instruments. MaxTrak will measure and control any clean, dry gas mass flow from 10 to 1000 SLPM, with lower flows and higher flows available upon request.

SmartTrak - Model 140 - Ultra-Low Mass Flow Controllers

by Sierra Instruments, Inc.     based in Monterey, CALIFORNIA (USA)

When you need precision gas mass flow control of expensive process gases, where minimal pressure drop is a key consideration for cost savings and efficiency, the SmartTrak® 140

Max-Trak - Model 180 + 316 - Stainless Steel Flanges

by Sierra Instruments, Inc.     based in Monterey, CALIFORNIA (USA)

The MaxTrak with 316 Stainless Steel Flanges is specifically designed for dirty environments commonly found in heavy industrial applications like metals and ceramics manufacturing, combustion control systems, chemical processing and pharmaceutical manufacturing where the instrument outperforms the competition by meeting the rigorous requirements ...

Need help finding the right suppliers?

Let the XPRTs do the work for you