Air Quality Equipment in Utah

965 Results found
  • Category: Air & Climate ×

  • Subcategory: Air Quality ×

  • Location: USA ×

  • Location: Utah ×

NEW: AS32M - Analyzer for Quick and Direct (Without Conversion) NO2 Measurement

by Environnement S.A

Designed to alleviate potential disadvantages of the chemiluminiscence method and to provide the most accurate value for NO2 concentration measurements. No chemical conversion required, not sensitive to other nitro-containing species and no Toxic Gas Emissions. Exclusive benefits: “True NO2” measurement (i.e. without conversion), Ultra sensitive, ...

NEW: VOC72M - The most compact and fully automated BTEX (Volatile Organic Compounds) analyser on the market,TÜV Certified

by Environnement S.A

The VOC72M, a key product of Environnement S.A (France) for the measurement of benzene, has obtained end of December the TÜV certification for ambient air monitoring. The analyser has passed successfully the laboratory and 3 months field investigations and found to comply with VDI 4202-1 : 2010, VDI 4203-3 : 2010, EN 14662-3 : 2005, EN 15267-1 : ...

Gasmet - CX4000 - Multicomponent FTIR Gas Analyzer

by Gasmet Technologies Oy

The Gasmet™ CX4000 is used in continuous emissions monitoring, process control and other applications where multiple gas compounds need to be monitored with great accuracy, such as waste incineration plants and cement kilns.CX4000 FTIR gas analysers are operated by an external industrial PC operating Calcmet™ software. Sample cell heating (180 C) ...

Airy Technology - MODEL P611 - Handheld Particle Counter

by Airy Technology, Inc.

Airy Technology P611 is the accurate, user friendly handheld particle counter. Its large color display shows 6 channels of cumulative and different particle counts simultaneously. Airy Technology P611 saves up to 10,000 sample data in the memory, which can be reviewed on the unit display and/or easily downloaded to your PC via USB cable. ...

Airy Technology - MODEL P311 - Handheld Particle Counter

by Airy Technology, Inc.

Airy Technology P311's large color display shows cumulative and differential particle counts of 3 particle sizes simultaneously. The small and middle particle ranges can easily be changed by a user. P311' s maximum concentration of 4,000,000 particles/ft3 and up to 8,000 data set record capabilities are the highest in the market. Data can be ...

43347-L R. M. Young RTD Temperature Probe

by Campbell Scientific, Inc.

The 43347 probe is typically used in air quality applications to obtain the delta temperature. Air temperature is measured at 2- and 10-meter measurement heights to determine atmospheric stability as required by the EPA (also referred to as 'delta temperature' measurement). The typical configuration consists of two calibrated probes housed in ...

05305-L R. M. Young Air Quality Wind Monitor

by Campbell Scientific, Inc.

The wind monitors are lightweight instruments that measure wind speed and direction. Manufactured by R. M. Young, the wind monitors are cabled for use with our dataloggers. The wind monitors' design emphasizes simplicity and lightweight construction. They are made out of rigid, UV-stabilized thermoplastic with stainless-steel and anodized-aluminum ...

Eddy Covariance

by Campbell Scientific, Inc.

An Eddy Covariance Station measures CO2, water vapor, or heat fluxes using the eddy covariance technique. A standard equipment set includes a CSAT3 Sonic Anemometer, a CR5000 Measurement and Control System, scalar sensors (CS7500 Open Path Infrared Gas Analyzer, FW05 fine-wire thermocouple, KH20 Krypton Hygrometer, and TGA100A Trace Gas Analyzer). ...

Campbell Scientific - CR1000 - Measurement & Control Datalogger

by Intermountain Environmental, Inc.

Following in the tradition of the CR10 and CR10X, our CR1000 dataloggers measure more sensors than our CR200X- and CR800-series dataloggers. The CR1000 is a compact, modular datalogger with a measurement and control module, external power supply, and optional keyboard display. Their power consumption and packaging are optimized for unattended ...

Campbell Scientific - CR3000 - Micrologger

by Intermountain Environmental, Inc.

The CR3000 Micrologger supports complex applications with many sensors. It is fast and powerful enough to handle extended eddy-covariance systems with full energy-balance systems. Multiple CR3000s can be configured as a network or units can be deployed individually. Designed for stand-alone operation in harsh, remote environments. The CR3000 ...

Need help finding the right suppliers?

Let the XPRTs do the work for you