Air Sampling Equipment in Mongolia

Served | Office inNear
744 Results found
  • Category: Air & Climate ×

  • Subcategory: Air Sampling ×

  • Location: Asia & Middle East ×

  • Location: Mongolia ×

CS1200P Passive Canister Sampler

by Entech Instruments, Inc.     based in Simi Valley, CALIFORNIA (USA)

The CS1200P Passive Canister Sampler is specifically configured for use with MiniCan Personal Monitoring applications. Testing of the CS1200E at temperatures ranging from 4† C to 40† C showed less than 10% flow rate change. It allows 1,3 or 8 hour sampling periods at a temperature range of -10† C to 45† C. Sapphire flow elements provide extremely ...

Model 2000 - Partisol FRM

by Thermo Scientific - Air Quality Instruments     based in Franklin, MASSACHUSETTS (USA)

The Partisol-FRM Model 2000 Air Sampler is USEPA reference method designated for both PM-2.5 and PM-10. It is the proven manual sampling platform for the USEPA PM-2.5 standard. It is based upon the original Partisol Air Sampler, which received the USEPA reference designation for PM-10 measurements in June 1994.

Gaseous Pollutants For Flue Gases

by Santes Ltd. Co.     based in Ankara, TURKEY

Flue gases originated from different sources contains hazardous gaseous pollutants such as SO2, SO3, H2S, HCl, HF. Those gases have a serious impact on the human health and the environment. Human health may be imposed in many ways with both short-term and long-term effects. Examples of short-term effects include irritation to the eyes, nose and ...

Soot-Trak - Real-Time Diesel Soot Mass

by Sierra Instruments, Inc.     based in Monterey, CALIFORNIA (USA)

The Sierra Instruments Soot-Trak laser measures real-time engine soot particle mass emissions and performs characterization of soot particle particle size, primary particle surface area and number. Soot-Trak provides researchers and engine developers the accurate information they require about particle transport. With measurement accuracy of 5% ...

Tekran - Model 1110 - Synchronized - Two Port Sampling System

by Tekran Instruments Corporation     based in Knoxville, TENNESSEE (USA)

The Tekran Model 1110 Synchronized Two Port Sampling System gives the Model 2537 Mercury Vapor Analyzer the ability to sample from two separate input sources. Switching between the two sources is synchronized with the instrument sampling cycle. The number of sampling cycles in each position is user programmable.

HiVol - Model 3000 - High Volume Air Sampler

by Ecotech Pty Ltd     based in Knoxfield, AUSTRALIA

The HiVol 3000 high volume air sampler provides high quality, reliable sampling with immediate notifications of errors providing high confidence in results and low data loss. The HiVol 3000 high volume air sampler incorporates advanced programming functions and electronic volumetric flow control to maintain a consistent flow and collect a truly ...

MicroVol - Model 1100 - Low Volume Air Sampler

by Ecotech Pty Ltd     based in Knoxfield, AUSTRALIA

The MicroVol 1100 low volume air sampler provides a flexible sampling platform for PM10, PM2.5 or TSP particulates and basic meteorological parameters.

Model PM162M - Automatic Sequential Particulate Sampler

by Environnement S.A     based in Poissy, FRANCE

Automatic Sequential Particulate Sampler (TSP / PM10 / PM2.5 / PM1). Complies with  EN 12341 standard Large autonomy.

Model DX4000 - Gasmet Multicomponent FTIR Gas Analyzer

by Gasmet Technologies Oy     based in Helsinki, FINLAND

The Gasmet DX4000 is a portable FTIR gas analyzer which is typically used in stack emissions monitoring, comparison measurements, catalytic process control and other applications where multiple gas compounds need to be accurately monitored in hot & humid sample gas. The Gasmet corrosion resistant sample cell is heated to 180 Deg C, which ...

Air-O-Cell - Sampling Cassette

by Zefon International, Inc.     based in Ocala, FLORIDA (USA)

The Air-O-Cell is a unique air sampling cassette specifically designed for the rapid collection of a wide range of airborne aerosols including mold spores, pollen, insect parts, skin cell fragments, fibers (e.g. asbestos, fiberglass, cellulose, clothing fibers, etc.) and inorganic particulate e.g. ceramic, fly ash, copy toner, etc.). The ...

Need help finding the right suppliers?

Let the XPRTs do the work for you