Air Sampling Equipment in Indiana

Served | Office inNear
1224 Results found
  • Category: Air & Climate ×

  • Subcategory: Air Sampling ×

  • Location: USA ×

  • Location: Indiana ×

Model AE42 - Portable Aethalometer

by Magee Scientific Company     based in CALIFORNIA (USA)

The Portable Aethalometer Model AE42 measures light absorption by suspended aerosol particles at two wavelengths: 880 nm (IR), quantitative for the mass of ‘Black’ Carbon; and 370 nm (UV), indicating aromatic organic compounds.  The instrument’s analytical performance is identical to the Rack Mount Aethalometer Model AE22, ...

Sampling System

by EcoChem Analytics     based in League City, TEXAS (USA)

In order for a Continuous Emission Monitoring System (CEMS) to function as desired it must be configured to deal with the environment and source type it will operate in. The rude fact is that the application engineering aspect of CEMS may be the most important part and it is in sampling systems where that is most critical. But it is not easy, ...

Zefon Escort ELF - Personal Air Sampling Pump

by Zefon International, Inc.     based in Ocala, FLORIDA (USA)

Escort ELF air sampling pumps feature a state of the art electronic laminar flow sensor to provide a constant flow control with ± 2.5% regulation of flow rate (from 1-3 lpm) with automatic compensation for changes in battery voltage, temperature, altitude, and sample load. An internal secondary standard calibrates the pump continuously and ...

Zefon International - Mold Sampling Starter Kit

by Zefon International, Inc.     based in Ocala, FLORIDA (USA)

Starter kits are an easy, convenient way to get everything you need to begin sampling for mold. Each kit comes in a convenient toolbox style carrying case and includes basic set-up and use instructions.

SKC AirChek - Model XR5000 - Sample Pumps

by US Environmental Rental Corporation     based in Waltham, MASSACHUSETTS (USA)

SKC AirChek XR5000 Sample Pumps are designed to offer users enhanced battery power and easy operation in a lightweight pump that provides accurate airflows from 5 to 5000 ml/min. AirChek XR5000 pumps feature a patented isothermal flow sensor that measures flow directly and acts as a secondary standard, constantly maintaining the set flow rate. A ...

ATEC - Model 8001 - Canister Sampler

by ATEC     based in Malibu, CALIFORNIA (USA)

The Model 8001 Canister Sampler is a self-contained air sampling instrument  that has been designed to collect air samples into canisters for specified periods.  The flow rates into the canisters are regulated using electronic mass flow controllers.  A single board internal computer with a color touch screen display provides ...

ATEC - Model 2200 - Canister Air Sampler

by ATEC     based in Malibu, CALIFORNIA (USA)

The ATEC Models 2200-1, 2200-12, and 2200-22 Toxic Air Sampler are self-contained air sampling instruments  that have been specifically designed to simultaneously collect air samples into canisters.  The flow rates into the canisters are regulated using electronic mass flow controllers.  A single board internal computer wi

ATEC - Model 2200 - Toxic Air Sampler

by ATEC     based in Malibu, CALIFORNIA (USA)

The ATEC Models 2200 and 2200-2 Toxic Air Samplers are self-contained air sampling instruments that have been specifically designed to simultaneously collect air samples into canisters and sorbent cartridges for specified time periods. This provides the capability of obtaining both VOC and Carbonyl measurements at the same time with one ...

Ormantine - Acid Gas Diffusion Tubes

by Ormantine USA Ltd., Inc.     based in Palm Bay, FLORIDA (USA)

This tube can simultaneously measure a range of acid gases – Hydrogen fluoride, Hydrogen chloride, Nitric acid, Hydrogen bromide, Phosphoric acid and Sulfuric acid (HF, HCl, HNO3, HBr, HPO4 and H2SO4).

Ormantine - Ammonia Diffusion Tubes

by Ormantine USA Ltd., Inc.     based in Palm Bay, FLORIDA (USA)

Ammonia diffusion tubes are suitable for long-term monitoring of ambient Ammonia pollution (sampling times are 2-4 weeks). These samplers are simple to use, requiring no specialist skills or power supply, making them an efficient monitoring option. With very low detection limits (in the low parts per billion range), even low levels of Ammonia ...

Need help finding the right suppliers?

Let the XPRTs do the work for you