Topics

Sections

Diesel Emissions Equipment

59 Results found
Order by:
Recommended | 
Alphabetical

Model 633 - Aethalometer

by Teledyne Advanced Pollution Instrumentation

Black Carbon particulate matter contributes to regional air pollution and is generated through combustion of any fuel source. Black Carbon particles are a major component of wood smoke and diesel exhaust.

Palas - Series VKL / KHG - Ejector Dilution Systems

by PALAS® GMBH

With Palas dilution systems of series VKL highly concentrated aerosols, also test aerosols, with a concentration of up to 106 P/cm3 are reliably lowered and made measurable for optical particle counters with a max. concentration limit of only 35 P/cm3. The Palas dilution systems are successfully used in vertical operation for the particle size ...

Acme - CEW Series - Wireless MultiSet Gas Detection And Control System

by Acme Engineering Prod. Ltd.

The CEW Series centralized detection and control system can monitor up to 32 remote detectors via a wireless RS-485 communication link at 900MHz or 2.4GHz, reducing installation costs. While typically used for enclosed vehicular facilities where CO and NO2 (for Diesel fumes) are the gases detected, the panel can also be configured to monitor CO2, ...

Acme - DG-EN Series - Diesel Fumes Detection System

by Acme Engineering Prod. Ltd.

The DG-EN is usually installed in bus and truck terminals or maintenance facilities, package distribution warehouses and building loading docks where Diesel fumes pose a threat to indoor air quality. In order to protect the sensor from the Respirable Combustible Dust (RCD) present in Diesel fumes, Acme uses an air pump to draw the sample to the ...

Acme - CEL Series - Multi-gas Detection and Control System

by Acme Engineering Prod. Ltd.

The CEL Series centralized detection and control system can monitor up to 32 remote detectors via a 4-wire RS-485 daisy-chain communication link, reducing installation costs. While typically used for enclosed vehicular facilities where CO and NO2 (for Diesel fumes) are the gases detected, the panel can also be configured to monitor CO2, Propane, ...

Acme - MGD-EN Series - Diesel Fumes Detection System

by Acme Engineering Prod. Ltd.

The MGD-EN is usually installed in bus and truck terminals or maintenance facilities, package distribution warehouses and building loading docks where both Diesel fumes and Carbon Monoxide (CO) pose a threat to indoor air quality. In order to protect the sensors from the Respirable Combustible Dust (RCD) present in Diesel fumes, ACME uses an air ...

CEW4 Series - Wireless Multiset Gas Detection and Control System

by Acme Engineering Prod. Ltd.

The CEW4Quadset system monitors up to 4 remote sensors wirelessly over a 900MHz or 2.4GHz network. This results in substantial savings in labor and material costs during installation. While typically used for enclosed parking facilities where CO and NO2 (for Diesel fumes) are the gases detected, the CEW4 can monitor other toxic gases such as ...

Model 109A - Continuous Total Carbon/ Methane Carbon/ Non Methane Carbon Analyzer Heated FID

by J.U.M. Engineering GmbH

The J.U.M 109A is being build since 1989. It is a heated FID analyzer to continuously and simultaneously measure the Methane concentration, the Total Hydrocarbon concentration and the Non Methane concentration simultaneously within a gaseous sample. The 109A is a table top or 19-inch rack mount Heated FID analyzer for the NMHC measurement in ...

Model 109L - High Temperature Total Hydrocarbon/Non-Methane Hydrocarbon Analyzer

by J.U.M. Engineering GmbH

The J.U.M 109L is a heated FID analyzer to continuously and simultaneously measure the Methane concentration, the Total Hydrocarbon concentration and the Non Methane concentration within a gaseous sample. The 109L is a table top or 19 inch rack mount Heated FID analyzer for the NMHC measurement in ambient air, exhaust gases from a combustion ...

2-way (Oxidation) Catalysts

by Johnson Matthey Emission Control Technologies

In most gas streams, carbon monoxide (CO) and hydrocarbons (HC) can be removed by combination with oxygen (O2) using an oxidation catalyst (also known as a 2-way catalyst): CO + ½ O2 → CO2, [HC] + O2 → CO2 + H2O. This reaction is suitable for oxygen-rich (“lean”) gas streams, typical of diesel exhaust and many ...


Air & ClimateEnergy & RenewablesEnvironmental ManagementHealth & SafetyMonitoring & TestingSoil & GroundwaterWaste & RecyclingWater & Wastewater