Dust Control Equipment

901 Results found
  • Category: Air & Climate ×

  • Subcategory: Dust Control ×

Model SPX50 - Dust Sensor

by AR-SEFRAM     based in Templemars, FRANCE

blind type display adjustment with a pocket or a PC network version possible ATEX II 2/1 D homologation automatic inclusion of cleaning peaks  connection with our dedicated SFX+ controller and our SMX 100 filter management unit

Eco-Tec - Pulp & Paper Kraft Boiler Chloride Removal

by Eco-Tec Inc.     based in Pickering, ONTARIO (CANADA)

The Kraft pulping process involves the use of recovery boilers to recover and reform chemicals for ‘White liquor’ from ‘Black liquor’. The performance of recovery boilers declines as they become plugged, mainly as a result of high levels of non-process elements chloride and potassium in the kraft recovery cycle. Treatment ...

Hellweg - Dust Removal Equipment For Dust-Free Regrind

by Hellweg Maschinenbau GmbH & Co. KG     based in Roetgen, GERMANY

The Hellweg dust removal equipment serves to separate dust from regrind. The conveying fan blows the ground material into a separation cyclone. There, the ground material falls down with the dust. The fan air is taken upwards and cleaned in a suspended dust filter hose. The ground material and dust are separated in the pre-cleaner by means of the ...

Cyclonic Scrubber

by MikroPul GmbH     based in Cologne, GERMANY

This basic scrubber has the capability of tolerating high inlet dust loadings without sacrificing its collection efficiency, which is 99+% at around the 5 micron size range.

WEIMA - Model High Density Series - Briquette Presses

by WEIMA UK c/o Fercell Engineering Ltd     based in AYLESFORD, UNITED KINGDOM

The new HD briquette press series are especially designed for compacting problematic materials such as MDF dust, wood chips and metal swarfs.

Model Single XQ Series - Cyclone Dust Collectors

by Fisher Klosterman, Inc.     based in Louisville, KENTUCKY (USA)

Fisher-Klosterman offers seven basic models of cyclone dust collectors - the XQ Series. These cyclones offer various levels of efficiency at any required pressure drop per your specific collection needs. Whether you just want to remove relatively large particles from the air, or you need to eliminate fine particulate from process gas streams, ...

L-CUT - Dust Collectors

by Keller Lufttechnik GmbH & Co. KG     based in

TThe L-CUT series has been specially developed for the collection of dust and fumes caused by thermal processes such as joining, separating, or surface treatment by laser, plasma or gases, to separate the finest of metal oxide particles. These units are compact and have a very low profile. Therefore, they can be installed in tight spaces. The ...

Filter Bags

by ICT Filtración, S.L.     based in Montgat (Barcelona), SPAIN

All filter bags and pockets manufactured by ICT FILTRACIÓN guarantee absolute tightness, high efficiency in particle retention and pure end products thanks to the high-quality fabrics used and thermowelded finishes with ultrasound-reinforced bonding. ICT FILTRACIÓN has an extensive database with the measurements and features of the ...

Counter Cyclonic Dust Collector

by Aerodyne - A Division of Abanaki Corporation     based in Chagrin Falls, OHIO (USA)

Counter-Cyclonic Industrial Dust Collection The Aerodyne SplitStream is a counter cyclonic dust collector that has no major moving components and is capable of handling a wide range of materials, while requiring minimal maintenance. Particulate that is granular, fibrous, sticky, or hydroscopic, with process temperatures ranging from -20° F to ...

BEECO - Model DC-ST-091 - DUST COLLECTOR

by BEECO, INC.     based in San Pablo City, PHILIPPINES

BEECO DUST COLLECTOR offers an efficient and practical way of handling dust problems generated in the production area. We designed the unit and customize it to fit your use. Our dust collector is equipped with a pulsejet backwash system for ease of filter cleaning.

Need help finding the right suppliers?

Let the XPRTs do the work for you