dust containment Equipment in Nevada

Serving Nevada | Near Nevada
131 Results found
  • Category: Air & Climate ×

  • Subcategory: Dust Control ×

  • Keyword: dust containment ×

  • Location: USA ×

  • Location: Nevada ×

Kleissler PC - Dust Containment Enclosures

by Kleissler P C, LLC     based in Avon-by-the-Sea, NEW JERSEY (USA)

Chloroform and Wax Mixing Cabinet and Drum Enclosure for Tablet Coating.

ZipWall - Model (2 Pack) - Foam Rails Dust Containment System Brochure

by Americover     based in Escondido,, CALIFORNIA (USA)

When using the ZipWall dust containment system, the  Foam Rail is a 5’ cross bar with a soft, spongy edge which attaches to the top of a ZipWall  pole and holds the enclosure plastic tightly against the ceiling. Foam Rails can also be used with Side Clamps for tight seals against walls.

Kleissler PC - Tray Dumping Dust Control Containment

by Kleissler P C, LLC     based in Avon-by-the-Sea, NEW JERSEY (USA)

Provides simultaneous dust control at two different dust generating points. Support rods are designed to position tray correj for proper dust control when removing paper cover. Effective dust control provided for dumping operation. Stainless steel construction] polished inside and out.

Model A•dust - Dust Filters

by Absolent AB     based in Lidköping, SWEDEN

The objective of a dust filter is to get rid of unhealthy particles. In some models, we use a HEPA-filter as the final filter step for the best possible result. With that, the air usually becomes so clean that it can be returned to the premises. We use pleated filter cartridges with superior filtration properties that clean more air/m² than ...

Ecotech - Real-Time Dust Monitor

by Ecotech Pty Ltd     based in Knoxfield, AUSTRALIA

Ecotech designs and integrates a wide range of continuous particulate monitors including light scattering based PM monitors and beta attenuation monitors. Our monitors can be incorporated into air conditioned weatherproof shelters or can be stand alone powered by solar panels. We offer a wide range of solutions for many different types of ...

DustView - Model II - Dust Measuring Device for The Comparison of Dust Formation of Powders and Bulk Materials

by Palas GmbH     based in Karlsruhe, GERMANY

Dust occurs during the production, conveyance and filling of powders, bulk materials, granulates, etc. Manufacturers can optimize powders in order to minimize the formation of dust. The DustView II provides a system for the virtually fully automatic and economical comparison of dust formation among various powders or analysis of the impacts of the ...

Scientific Dust Collectors - Model FC - Self-Contained Collector

by Scientific Dust Collectors     based in Alsip, ILLINOIS (USA)

Scientific Dust Collectors (FC) Fume Collector is a self-contained collector designed for welding smoke, fumes, and light dust applications. The FC utilizes the patented supersonic nozzle cleaning system as well as a hinged door with our patented Pedal Actuated Cartridge Release System for filter removal, NO TOOLS REQUIRED! This special design has ...

Scientific Dust Collectors - Model SDT - Self Contained Collection System

by Scientific Dust Collectors     based in Alsip, ILLINOIS (USA)

Scientific Dust Collectors (SDT) Downdraft Table is a self contained collection system that is ergonomically designed to  provide a clean and safe working environment. It is ideal for grinding, polishing, sanding, buffing, and any manual finishing operations. It is a heavy duty work base table that can handle a capacity of up to 3000 lbs ...

Dust Generator - Model SAG 420 - Powder Dosing and Dispersing for ISO 5011 Testing

by Topas GmbH     based in Dresden, GERMANY

The Dust Feeder / Dust Disperser SAG 420 is a device for generating aerosols by transforming a powdered solid into the air-floating state (dust). Due to its special features the device can preferably be used in efficiency and capacity tests of filters and separators such as tests according to ISO 5011. - high dosing continuity of different dusts ...

Scientific Dust Collectors - Supersonic Pulse Jet Insert (SPJ-I) Collector

by Scientific Dust Collectors     based in Alsip, ILLINOIS (USA)

Scientific Dust Collectors' Supersonic Pulse Jet Insert (SPJ-I) Collector is designed for conveyors, tanks, silos, air slides, cyclones, and bins. This self-contained dust collector is integrated into a current enclosure allowing dust to be retained where it is generated and can be custom designed to meet specific needs. It utilizes the patented ...

Need help finding the right suppliers?

Let the XPRTs do the work for you