Dust Control Equipment in Oklahoma

Served | Office inNear
581 Results found
  • Category: Air & Climate ×

  • Subcategory: Dust Control ×

  • Location: USA ×

  • Location: Oklahoma ×

Eco-Tec - Pulp & Paper Kraft Boiler Chloride Removal

by Eco-Tec Inc.     based in Pickering, ONTARIO (CANADA)

The Kraft pulping process involves the use of recovery boilers to recover and reform chemicals for ‘White liquor’ from ‘Black liquor’. The performance of recovery boilers declines as they become plugged, mainly as a result of high levels of non-process elements chloride and potassium in the kraft recovery cycle. Treatment ...

Hellweg - Dust Removal Equipment For Dust-Free Regrind

by Hellweg Maschinenbau GmbH & Co. KG     based in Roetgen, GERMANY

The Hellweg dust removal equipment serves to separate dust from regrind. The conveying fan blows the ground material into a separation cyclone. There, the ground material falls down with the dust. The fan air is taken upwards and cleaned in a suspended dust filter hose. The ground material and dust are separated in the pre-cleaner by means of the ...

Cyclonic Scrubber

by MikroPul GmbH     based in Cologne, GERMANY

This basic scrubber has the capability of tolerating high inlet dust loadings without sacrificing its collection efficiency, which is 99+% at around the 5 micron size range.

Counter Cyclonic Dust Collector

by Aerodyne - A Division of Abanaki Corporation     based in Chagrin Falls, OHIO (USA)

Counter-Cyclonic Industrial Dust Collection The Aerodyne SplitStream is a counter cyclonic dust collector that has no major moving components and is capable of handling a wide range of materials, while requiring minimal maintenance. Particulate that is granular, fibrous, sticky, or hydroscopic, with process temperatures ranging from -20° F to ...

Pactecon - Model PC-100 - Dust Collectors

by Sly Filters Europe Ltd     based in Leicester,, UNITED KINGDOM

Low Headroom, Outside Bag Removal, Compact Overall Size Sly Pactecon collec¬tors are designed to continuously clean with no interruption of process air flow. Greater Filter Capacity in a Smaller Space Sly's unique rectangu¬lar envelope bags pack more filter cloth per cubic foot into the smallest space. The smaller the collector, the less ...

Model HOPPERTOP - Weigh Hopper Venting Filter

by WAM Italia S.p.A     based in Cavezzo, ITALY

HOPPERTOP is a small cylindrical venting filter specifically for installation on weigh hoppers in concrete batching plants.

Land - Model 4500 MkIII - Opacity and Dust Emissions Compliance Monitor

by Land Instruments International     based in Dronfield, UNITED KINGDOM

The Land Model 4500 MkIII has reset the industry standard on compliance opacity and dust concentration measurement. Combining the unique features of three patented technologies, the 4500 MkIII achieves the highest available specification for the principal performance parameters, as defined by the internationally recognized ASTM Standard D 6216-07.

TRIBO guard II - Model 4002 - Dust Monitor

by Auburn Systems, LLC     based in Danvers, MASSACHUSETTS (USA)

The TRIBO.guard II Model 4002 Dust Monitor continuously monitors dust in exhaust ducts to detect filter failures. The 4002 detects changes in the levels and warns of impending failure before emissions become visible. Continuous 4-20mA output is linked to data loggers or other devices, such as PLCs, to record emissions levels, pinpoint maintenance ...

Model RDC 600 - Road Dust Control Agent

by National Land Management     based in Phoenix, ARIZONA (USA)

RDC - 600 is a stable, concentrated, non-volatile emulsion of petroleum distillates and wetting agents designed for use as a dust control palliative on secondary and un-improved roads. This product will completely mitigate dust on nearly every known surface thereby eliminating the costs associated with water trucks and frequent reapplications ...


Kleissler PC - Ring Dust Control Hoods

by Kleissler P C, LLC     based in Avon-by-the-Sea, NEW JERSEY (USA)

Kleissler Particle Control Ring Hoods are commonly used at chutes or in equipment where there are make/break connections. They may also be used on equipment with smaller charging ports. These hoods are polished stainless steel construction and include access covers which can be removed for easy cleaning of interior surfaces without the need to use ...

Need help finding the right suppliers?

Let the XPRTs do the work for you