Emissions Monitoring Equipment in Netherlands Antilles

Serving Netherlands Antilles | Near Netherlands Antilles
359 Results found
  • Category: Air & Climate ×

  • Subcategory: Emissions Monitoring ×

  • Location: Latin America ×

  • Location: Netherlands Antilles ×

Zero-Emission Bio-Reactors

by Specialty Systems Integrators, Inc.     based in Plymouth, MINNESOTA (USA)

SSI’s Zero-Emission Bioreactor is an example of a custom built remediation system. Our system extracted contaminated water which was transferred to a bioreaction tank. The ex-situ Bioreactor-based water treatment involves pumping groundwater out of the ground, mixing it with active microorganisms in a bioreactor system, and discharging the newly ...

SEMTECH - Model ECOSTAR - Modular Portable Emissions Measurement System

by Sensors, Inc.     based in Saline, MICHIGAN (USA)

The SEMTECH ECOSTAR product suite comprises a range of individual, self-contained modules, each with a specific functionality, which may be operated as stand-alone analytical devices or as part of a fully integrated measurement package. Each module has been designed to maintain its high-grade analytical performance while operating under extreme ...

Waste Incineration Directive (2000/76/EC)

by Dr. Födisch Umweltmesstechnik AG     based in Markranstädt, GERMANY

In order to analyse the gaseous components a partial gas stream is withdrawn by the sampling probe and led to the analyser cabinet via measuring gas pipe and pump. The measuring gas is tempered at 185 °C and monitored for its flow and temperature.

Procal - Model 5000 - UV Emissions Analyser

by Procal - Parker Hannifin Corp     based in Peterborough, UNITED KINGDOM

Procal 5000 is an ultra-violet (UV), continuous emission monitoring analyser, designed for in situ analysis of gas-phase emission components. Using absorption spectroscopy, Procal 5000 stores and analyses the full UV spectrum and calculates the gas emission concentrations. A typical system comprises an in situ analyser, an integral calibration ...

Sierra - Model BG-3 Elite - High Performance Partial Flow Dilution System

by Sierra Instruments, Inc.     based in Monterey, CALIFORNIA (USA)

In use since 2004, BG3 PFD (Partial Flow Dilution) technology effectively performs engine research and development to accurately sample exhaust PM (Particulate Matter) emissions over both steady state and transient test cycles (Read Case Study). On January 7, 2011, PFD was signed into law and is now included in the United States Federal Register ...

Model MIR-9000 - Continuous Emissions Monitoring Systems

by a1-cbiss     based in Birkenhead, UNITED KINGDOM

Measurement Technique: Utilising Infra-Red Gas Filter Correlation allows the MIR-9000 to offer up to ten gas measurements simultaneously, including Nitric Oxide (NO), Nitrogen Dioxide (NO2), Sulphur Dioxide (SO2), Carbon Monoxide (CO), even Hydrogen Chloride (HCl) and Hydrogen Fluoride (HF).

Ecotech - Model EC9832 - Carbon Monoxide Analyser

by Ecotech Pty Ltd     based in Knoxfield, AUSTRALIA

The EC9832 Carbon Monoxide analyser combines the benefits of microprocessor control with the NDIR gas filter correlation photometry to measure CO in the range 0-3000 ppm.

CellaTemp - Model PM 11 - Miniature Pyrometer

by KELLER HCW GmbH, Division MSR     based in Ibbenbüren-Laggenbeck, GERMANY

CellaTemp PM 11 is especially suitable for use in extremely cramped conditions. The entire optics and electronics are housed in the instrument's tiny enclosure (36 x 20 x 52 mm). Features include ambient temperature compensation and microcontroller-based digital linearisation. The analogue output signal (linear to 0 °C to 400 °C) can be ...

Environnement S.A. - Model AMESA - Dioxin Monitoring System

by Environnement S.A     based in Poissy, FRANCE

TRADITIONALLY, THE MONITORING OF PCDD/FS IS ACHIEVED BY TAKING 1–3 SHORT-TERM SAMPLES PER YEAR (EACH OF 6 HOURS). However, over the past 10 years it was discovered that especially during start-up and shut-down periods of (state of the art) incinerators the dioxin emissions in the flue-gas can increase compared to normal operation up to ...


Microdust - Model Pro - Remote Noise Monitoring System / Remote Dust Emissions Monitoring System

by Casella     based in Kempston, UNITED KINGDOM

Microdust Pro is a rugged, hand-held, data logging instrument for the real-time detection of airborne dusts, fumes and aerosols. A quick, easy to use instrument, giving the user additional qualitative data which cannot be gained by gravimetric air sampling methods alone. This extremely versatile instrument can also be used with a range of ...

Need help finding the right suppliers?

Let the XPRTs do the work for you