Topics

Sections

flue gas treatment Equipment

45 Results found
Order by:
Recommended | 
Alphabetical

Xerosorp For Dry Scrubbing Flue Gas Treatment Process

by Hitachi Zosen Inova

The dry scrubbing flue gas treatment process is designed to remove acidic gaseous contaminants by absorption with sodium bicarbonate. Due to the very high reactivity of sodium bicarbonate, only a small stoichiometry amount is required. The process is nearly independent of temperature and thus enables maximum energy recovery.

Inova Semi Dry Flue Gas Treatment Process

by Hitachi Zosen Inova

Semi Dry: Simple, Effective and Waste Water Free. The semi dry flue gas treatment process removed acidic gaseous contaminants by neutralisation with hydrated lime dust. Heavy metal compounds and organic contaminants, such as dioxins and furans, are separated by adsorption onto activated carbon in the same process step.

Heavy Metals For Combustion/Incineration Processes

by Santes Ltd. Co.

Heavy metals are mainly produced during combustion/incineration processes. Heavy metals exert a range of chronic and acute toxic health effects including carcinogenic, neurological, hepatic and renal. Toxic effects associated with heavy metals generally occur at higher concentrations. Based on the source of heavy metals type of the metal emitted ...

Gaseous Pollutants For Flue Gases

by Santes Ltd. Co.

Flue gases originated from different sources contains hazardous gaseous pollutants such as SO2, SO3, H2S, HCl, HF. Those gases have a serious impact on the human health and the environment. Human health may be imposed in many ways with both short-term and long-term effects. Examples of short-term effects include irritation to the eyes, nose and ...

Particulate Matter (PM)

by Santes Ltd. Co.

Particulate matter (PM) is an air pollutant consisting of a mixture of particles that can be solid, liquid or both, are suspended in the air and represent a complex mixture of organic and inorganic substances. These particles vary in size, composition and origin. Their properties are summarized according to their aerodynamic diameter, called ...

Flue Gas Treatment

by A B Dust Control Limited

SCR and SNCR. AB Dust SCR ( selective catalytic reduction) system and SNCR ( selective non-catalytic reduction) are a new addition to our product range due the the increasing demand on reducing NOX emissions. Our equipment is capable of removing nitrous oxide (NOx) and other major pollutants, such as sulphuric acid, carbon monoxide and dioxin.

Sorbacal - HSH - Single-Pass Dry Flue Gas Treatment

by Lhoist Group

Sorbacal HSH is a calcium hydroxide specifically developed for the single-pass dry flue gas treatment. It differs from Sorbacal H with a higher specific surface area (SSA): 15-18 m²/g for Sorbacal H and 25 m²/g for Sorbacal HSH. Sorbacal HSH was developed for the specifications of the Brazilian market and is produced in Brazil today.

Flue Gas Treatment

by JOSEPH EGLI AG

Depend on the environmental and economical request we design the flue gas treatment. Two principal of adsorption came to the fore, wet and dry adsorption. In case of emission there are mainly to standards requested: US EPA Standard, European Standard according the Guideline 2000/76/EC, Mostly both of the standards can be achieved by a dry or wet ...

Minsorb - Mineral Alternative For The Removal of Micro-Pollutants

by Lhoist Group

Minsorb is the 100% mineral alternative for the removal of micro-pollutants in dry flue gas treatment. dioxins/furans (PCDD/PCDF), PCB and PAH. Mercury: metallic and ionic.

Thermal Oxidizer Flue Gas Treatment

by D.R. Technology, Inc.

D.R. Technology offers Pollution Control systems capable of treating gases up to 2000 degrees F°. Quenchers/Scrubbers/Absorbers can reduce acid levels by as much as 99+% and recover saleable acid solutions.


Air & ClimateEnergy & RenewablesEnvironmental ManagementHealth & SafetyMonitoring & TestingSoil & GroundwaterWaste & RecyclingWater & Wastewater