Stack Monitoring Equipment

93 Results found
  • Category: Air & Climate ×

  • Subcategory: Stack Monitoring ×

CEMSFlow - Model 500 - Stack Flow Monitor

by Trace Environmental Systems, Inc.

To further illustrate our fully integrated solution for continuous stack monitoring, Trace has proudly been utilizing our Pitot Style DP stack flowmeter on those projects requiring continuous stack flow measurement.  The CEMSFlow 500 is fully compliant with State and EPA requirements including PS-6.  For solid fuel sources or for those ...

Felix IsoKenetic - Stack Train IST Sampler

by Felix Technology Inc.

IST Method 5 sampler systems are manufactured to conform with the construction design criteria and specifications cited in US EPA Method 5, Code of Federal Regulations (40CFR Part 60) and APTD-0581 Document. Our source sampler consoles allow operators to monitor gas velocities, temperatures, pressures and sample flow rates in order to maintain ...


LaserGas - Model II - Single Path Monitor for In-Situ Measurement in Stacks

by Neo Monitors AS

Single Path Monitors are designed for in-situ measurement in stacks, ducts, or reactors with typical path lengths in the range 0.5 to 20 meters. By-pass and extractive configurations are also possible. The monitors’ compact design comprises the transmitter unit with laser module; collimating optics, and main electronics and the receiver unit ...

Model GCEM40 Series - In-situ Flue Gas Analyser

by Codel International Ltd

The GCEM40 series is our latest generation of in-situ gas analysers. Designed for use primarily on combustion processes the analysers measure the key pollutants such as CO, NO, NO2, NOx, SO2, CH4, HCl, CO2 and H2O.

HORIBA - Model CC-100E - Converter Checker

by HORIBA Europe GmbH

HORIBA Europe’s NOx Converter Checker CC-100E has been developed to test the efficiency of NOx to NO converters, which are used in NOx gas analyzers for stack emission measurements or process gas analysis.

Model Xelas LAB/SCAN-tfs - Measurement of TFS samples - Thickness and n&k from Layers and Stacks

by AudioDev GmbH

For Thin Film Solar (TFS) modules, many different types are currently produced: Most interesting systems are the silicon-based type (a-Si/µc-Si layers), the CIS/CIGS solar stacks , CdTe systems and finally cells based on organic layers. All types of TFS modules need at least one TCO layer as n-ZnO:Al or ITO, and metallic layers as Ag, Al, ...

Ιsokinetic Stack Sampling

by ENCO LTD

ENCO offers a complete range of off-line sampling equipment for dust and gaseous emissions. They are all instruments operating with standard reference methods (EN, ISO and US EPA methods) and are used for periodic measurements according to the environmental legislation, spot measurements or for calibration of continuous emission analysers  ...

Model DX4000 - Gasmet Multicomponent FTIR Gas Analyzer

by Gasmet Technologies Oy

The Gasmet DX4000 is a portable FTIR gas analyzer which is typically used in stack emissions monitoring, comparison measurements, catalytic process control and other applications where multiple gas compounds need to be accurately monitored in hot & humid sample gas. The Gasmet corrosion resistant sample cell is heated to 180 Deg C, which ...

LaserGas - Model II - Standard Single Path Compact Monitor

by Neo Monitors AS

Derived from the standard Single Path instrument, SP Compact Monitors are optimized for short distance measurement in the range 10 to 100 centimeters. The Monitors feature a focused laser beam, which enables the instrument to measure through very thin nozzles (< 10 mm diameter). For applications with continuous purge to prevent dust on the ...

Land - Model FGA 900 Series - Range of Stack Gas Emissions Analysers

by Land Instruments International

The FGA range of analyzers use dual sensor technology to measure the levels of Nitrogen Oxides, Carbon Monoxide and Oxygen in flue gas. O2, CO, NO, NO2, NOX.

Need help finding the right suppliers?

Let the XPRTs do the work for you