OILmiser Reservoir Aspirator

0.511.522.533.544.55 (0 votes)
Technology www.oilmiser.com JLM Systems Limited 23091 Westminster Highway Richmond, BC Canada V6V 1B9 Toll Free: 1-888-RENU OIL(736-8645) Phone: 604-521-3248 Fax: 604-521-1244 E-mail: info@oilmiser.com The OILMISER™ Reservoir Aspirator The OILMISER™ Reservoir Aspirator (ORA) addresses three basic issues that limit the life and the effectiveness of air breathers used on vented reservoirs. (1), bidirectional air flow through the filter media. (2), the back flow of fumes and gasses through the filter media. (3), the true differential pressure drop across the filter media. The ORA has two independent passageways in one body. The vertical airway, is called the Inflow Control Gate or the ICG port. The second passageway is called the Exhaust Control Outlet, or the ECO port. The Inflow Control Gate lets outside air enter the reservoir through the air filter, and prevents internal air from exiting through the air filter. In the absence of contaminated back flow, the life of an air breather is significantly increased. Many hydraulic reservoirs operate in extremely wet and hostile environments, or in inaccessi-ble locations. Now they can be aspirated from a clean, safe, and accessible location. Clean air can be piped into the reservoir via the ICG port, without the problems and complications caused by the back flow of exhaust vapors. On the basic ORA-1000, the ICG airway is accessed through an OILMISER™ 5 micron air filter under our high visability molded cap. If prefered, the ICG airway can be reconfigured. Optional top end couplers are designed to accept conventional pipe fittings for piping in clean air from a remote location. Other top end couplers, accept standard spin-on air filters and air breathers, manufactured by others. The Exhaust Control Outlet is also a unidirectional passageway. Fumes and gasses generated inside the reservoir, must exit through the ECO port, while replacement air can only re-enter through the ICG port. The ORA is somewhat like the EGR valve used in modern automobile engines. Internal fumes and gasses can be piped out of the immediate work area where they can be safely released to atmosphere, or further conditioned to meet local OSHA and environmental regulations. The ECO port on the base model of an ORA-1000 has a 1' NPT female pipe thread. An optional SAE-16 female O’ring port is also available (ORA-1016). An optional Vacuum Gauge Port is located in the ICG cavity, down stream of the air filter. Under unidirectional air flow, vacuum gauge readings are more accurate and more reliable. The discipline of condition based maintenance can now be used to establish the useful life of the air breather. In minutes, the OILMISER™ Reservoir Aspirator can replace most conventional filler/breathers using the 6 hole x 2.88' BC mounting pattern. The OILMISER™ Reservoir Aspirator is shipped fully assembled, and includes a tank top gas-ket and mounting screws. Part Number Inflow Control Gate (ICG) Exhaust Control Outlet (ECO) ORA-1000 OILmiser 5mµ Air Filter & Cap 1' NPT Female Pipe ORA-1000-4100 1' NPT Female Pipe 1' NPT Female Pipe ORA-1000-4200 2' NPT Female Pipe 1' NPT Female Pipe Other ICG and ECO Port Configurations and Mounting Options are Available. Contact Factory for Details ORA-1000-4100 ORA-1000 Technology www.oilmiser.com JLM Systems Limited 23091 Westminster Highway Richmond, BC Canada V6V 1B9 Toll Free: 1-888-RENU OIL(736-8645) Phone: 604-521-3248 Fax: 604-521-1244 E-mail: info@oilmiser.com

Post a New Comment

0 Comments

No comments were found for OILmiser Reservoir Aspirator. Be the first to comment!

Download Full

Environmental XPRT is part of XPRT Media All Rights Reserved
Subscribe