PRODUCTS

14 Products found

Ultrasonic Anemometers

ATI - A Style Probe - Ultrasonic Anemometer, SATI Series

'A' Style Ultrasonic Anemometer - 3 axis, 3D non-orthogonal probe design. This meteorological instrument is a scientific grade wind speed, wind direction and temperature device for use in research grade, weather systems where high velocity information is required. This is the newest ultrasonic anemometer in the Meteorological Instruments Product Line. The Ultrasonic Anemometer offers greater accuracy and reliability than mechanical cups and vanes....

ATI - K Style Probe - Ultrasonic Anemometer, SATI Series

'K' Style Ultrasonic Anemometer - 3 axis, 3D orthogonal probe design. This meteorological instrument is a scientific grade wind speed, wind direction and temperature device for use in atmospheric boundary layer studies.  Array design assures minimum flow distortion errors in measured turbulence statistics. The 'K' style Ultrasonic Anemometer is a 3 axis, 3d, 15 cm, scientific Ultrasonic Anemometer that has been designed for atmospheric boundary...

ATI - Sx Style Probe - Ultrasonic Anemometer, SATI Series

The 'Sx' style Ultrasonic Anemometer is a 3 axis, 3d, 15 cm, scientific Ultrasonic Anemometer that has been designed for environmental monitoring where the horizontal wind measurements are required to be in the same plane. The W component measurement on the upwind side of the probe provides the most accurate and unobstructed value of vertical winds. The electronics are contained within the probe bar. It operates on DC power with a power consumption of...

ATI - V Style Probe - Ultrasonic Anemometer, SATI Series

The 'V' style Ultrasonic Anemometer is a 3 axis, 3d, 10 cm, scientific Ultrasonic Anemometer that is a special design for turbulence, where eddy measurements must be the smallest. The electronics are contained within the probe bar. It operates on DC power with a power consumption of about 1 watt. This meteorological instrument can be used in many different weather systems for highly accurate wind speed, wind direction and temperature information.

ATI - Vx Style Probe - Ultrasonic Anemometer, SATI Series

The 'Vx' style Ultrasonic Anemometer is a 3 axis, 3d, 15 cm, scientific Ultrasonic Anemometer is a compact design for flux measurements in plant and forest canopies where wind speeds are very low and directions are highly unpredictable. The electronics are contained within the probe bar. It operates on DC power with a power consumption of about 1 watt. This meteorological instrument can be used in many different weather systems for highly accurate...

ATI - CATI/2 - Commercial Anemometer Systems

The 'CATI/2' style Ultrasonic Anemometer is a 2 axis, 2d, 15 cm, commercial Ultrasonic Anemometer that has been designed to mount almost anywhere. This 2 axis Ultrasonic Anemometer uses the same technology as the scientific, but to a lesser degree. This wind sensor doesn't provide the accuracy or resolution of the scientific but is designed to meet the needs of commercial users, and it is priced in a range that is competitive with other commercial...

ATI - SPAS/2Y - Commercial Anemometer System

The 'SPAS/2Y' style Ultrasonic Anemometer is a 2 axis, 2d, 15 cm, commercial Ultrasonic Anemometer. This sensor offers high quality performance in an inexpensive package. The electronics are contained within the probe and a single cable connects it to your PC. This sensor can provide nearly the accuracy and resolution of the scientific Ultrasonic Anemometer, but it is designed to meet the needs of commercial users, and is priced in a range that is...

Data Collection

DataPacker - Data Collection and Data Synchronization Device

The DataPacker will perform data collection and data synchronization of multiple Applied Technologies Ultrasonic Anemometers. The DataPacker will accept a combination of ATI Ultrasonic Anemometer outputs and analog outputs, synchronize, combine and format the data and presents it all in a single serial digital output packet. The digital output can be presented to most computers with a serial port, or any digital recording device for easy storage and...

Flux Measurement Products

FluxPak - Complete Flux Measurement System

The FluxPack System - FluxPak is a complete flux measurement package that uses the eddy covariance method and provides for the measurement of fluxes, such as sensible heat flux, momentum flux, and latent heat flux. The basic system comes with an ultrasonic anemometer, a computer and the FluxSoft software package. The basic system will provide momentum and sensible heat flux and with a hygrometer added, H2O and latent heat flux can also be made...

Radar Products

ATI - Radar Wind Profiler (RWP)

A radar wind profiler (RWP) is a pulse Doppler radar system, utilized to measure wind profiles from near ground to as high as 20 Km. RWP systems typically operate between 50 MHz and 1.2 GHz, and use phase-array antenna systems. The antenna points vertically, directly above the radar. The new ATI RWPs are designed around original and proprietary antenna, receiver, and signal processing techniques. These new systems have been carefully developed for...

ATI - T/R - Custom Radar System

Applied Technologies can custom design and build T/R Modules for your application. The T/R modules are designed using the highest quality components.

Weather System

ATI - MSS-1000 - Meteorological Sensor System

The Meteorological Sensor System combines the most frequently required meteorological sensors into a single easy-to-use package. A single processor controls all the sensors and provides for synchronized measurements, then all the data are output in a single packet. The Meteorological Sensor System or MSS is a complete weather station with many options available. The MSS was originally designed to meet the challenging requirements of a military...

Timers Products

ATI - Astro Timer for Programmable Pulse Generator & Event Time Stamper

The Astro Timer is a time programmable pulse generator and event time stamper. The Astro Timer is phase locked to GPS with a +/- 50 nSec accuracy. The Astro Timer is able to time stamp external events in UTC. It has a built-in LCD screen with a switchable backlight and provides a serial port for communication. The unit is powered by 9-24 VDC and can be battery operated.

ATI - Industrial Highly Accurate Timer

The Industrial Timer is designed for use in manufacturing for timing of processes. The Industrial Timer is a highly accurate timer with an RF link. The Industrial timer is a start / finish timer that can be either a infra red finish or microswitch. It consists of two electronics boxes with connectors and remote IR transmitter. The boxes can be linked via spread spectrum radios or directly wired. It's timing is accurate to 100 microseconds and it will...

14 Products found
Environmental Expert is part of XPRT Media All Rights Reserved