PRODUCTS

27 Products found

Regenerative Thermal Oxidizers (RTO)

The TRITON Series of Regenerative Thermal Oxidizers represents the most advanced and most efficient thermal oxidizer systems in existence today.  With thermal efficiencies of up to 97%, and destruction efficiencies that can exceed 99%, the TRITON Series RTOs will give you the highest possible destruction rates at the lowest cost.

TRITON - Model III Series - Regenerative Thermal Oxidizer

TRITON III-Series Regenerative Thermal Oxidizers are the traditional three-tower (or multiple tower) designed RTO. While these systems require somewhat higher initial cost, their benefits are realized by being able to achieve up to 99.9% removal efficiency. In some applications, this level of removal efficiency may be required to meet permitting requirement, corporate emission goals, or if odorous compounds are a concern, the TRITON III-Series...

TRITON - Model II Series - Regenerative Thermal Oxidizers

TRITON II-Series Regenerative Thermal Oxidizer’s improve upon the success of the TRITON Series RTO’s by adding a specialized VOC Polishing Chamber. By matching the VOC Polishing Chamber, the TRITON II Series RTO is capable of delivering +99% VOC destruction efficiency. Designed around the world’s most stringent emission requirements, TRITON RTO’s can confidently assure you of exceptional performance and reliability.TRITON II...

TRITON - Model Series - Regenerative Thermal Oxidizers

TRITON-Series Regenerative Thermal Oxidizers are two-tower systems and all are custom engineered to your exact needs. Each system incorporates specialized ceramic media in the regenerator (heat transfer bed) to allow thermal rate efficiencies up to 97%, thus making TRITON Systems among the worlds most cost effective air pollution control alternatives. TRITON RTO’s take advantage of our unique valve technology to deliver greater than 98%...

Catalytic Oxidizers

Catalytic Products International specializes in the design and development of Catalytic Oxidizer Systems that abate and treat VOC’s and other air pollutants. These by-products are released into the atmosphere or used with an energy recovery technique to further lower opering costs of our clients.

VECTOR - Catalytic Oxidizers

The VECTOR line of catalytic oxidizers is designed to treat hydrocarbons, volatile organic compounds (VOC), hazardous air pollutants (HAP), noxious and odorous emissions. No other manufacturer offers you the extensive knowledge - in both oxidizers and catalyst technologies - necessary to achieve the most complete and cost effective elimination of VOC's.

VECTOR-e - Catalytic Oxidizer

The VECTOR-e line of catalytic oxidizers is based on the success of our VECTOR System with the substation of an electric heating system – rather than a gas combustion system. No other manufacturer offers you the extensive knowledge - in both oxidizers and catalyst technologies - necessary to achieve the most complete and cost effective elimination of VOC's.

VECTOR NR - Non-Recuperative Catalytic Oxidizer

The VECTOR-NR Series catalytic oxidizers are designed to treat hydrocarbons, volatile organic compounds (VOC), hazardous air pollutants (HAP), noxious and odorous emissions. The system is a low cost catalytic oxidizer that does not incorporate a primary heat exchanger. Especially well suited to applications with high inlet temperatures where a primary heat exchanger does not offer a fast return on investment.

VANGUARD - Ammonia Abatement System

VANGUARD Ammonia Abatement Systems are designed to remove ammonia from either a liquid waste stream or from a vapor exhaust. At the heart of the VANGUARD System is our unique catalytic treatment device. The VANGUARD System incorporates unique features that allow for Ammonia removal from air streams with a very small percentage of NOx formation. NOx formation is further reduced by the use of secondary catalyst systems without the use of costly...

CONCORD - CO & NOX Abatement System

CONCORD CONOx Abatement Systems are custom engineered NOx and/or CO abatement system in one modular package. The CONCORD is a unique abatement device designed as a combined selective catalytic reduction (SCR) NOx abatement system and CO abatement System in one convenient and integrated package.

Thermal Oxidizers

Catalytic Products International specializes in the design and development of Thermal Oxidizers. Thermal treatment of VOC's and other air pollutants works by a simple reaction of the harmful air pollutants with oxygen and heat. In this environment the VOC's are converted to water vapor, and usable heat. These harmless by-products are released into the atmosphere or use an energy recovery technique to further lower the operational costs.

QUADRANT - Model SR-Series - Thermal Oxidizer

QUADRANT SR-Series Thermal Oxidizers are considered among the world's most advanced recuperative thermal oxidation systems. These specially designed and proven systems combine the basic principles of time, temperature, and turbulence to the fullest extent possible. The results provide you with exceptional performance, substantially reduced operating costs, and industry-leading reliability.

QUADRANT - Model NR-Series - Thermal Oxidizers

QUADRANT NR-Series Thermal Oxidizer’s are considered among the world's most advanced non-recuperative thermal oxidation systems. These specially designed and proven systems combine the basic principles of time, temperature, and turbulence to the fullest extent possible. The results provide you with exceptional performance, economical purchase and installation cost, and industry-leading reliability.

QUADRANT - Model NRV-SERIES - Thermal Oxidizer

The QUADRANT NRV Thermal Oxidizer is a market driven answer to a unique air pollution problem. Highly concentrated vent gas emissions are common among the petro-chemical, chemical processing, and pharmaceutical industries. These emissions are typically low in volume but very high in concentration. Typical answers to these emissions have included inefficient and dangerous flare technology. The QUADRANT NRV Thermal Oxidizer is a much safer, more...

QUADRANT - Model IR Series - Thermal Oxidizer

The QUADRANT IR-Thermal Oxidizer is CPI’s market driven response for simplified air compliance solutions without sacrificing long term reliability, high performance, or uptime assurance. The QUADRANT IR-Series system meets these challenges by incorporating our revolutionary FLOATING TUBE heat exchanger in an integrated package with the famous QUADRANT combustion chamber. This single vessel concept is the cornerstone for the IR-System.

QUADRANT - Model SRS-Series - Thermal Oxidizer

QUADRANT SRS Thermal Oxidizer’s are an example of Catalytic Products International’s continuous improvement capabilities. The QUADRANT SRS is our answer to industry requests for a more rugged and durable thermal oxidizer – especially designed to process emissions from the silicone coating industries. The QUADRANT SRS takes advantage of the proven success of the QUADRANT SR Thermal Oxidizer line, and uniquely modifies the flows to...

Heat Exchangers

CPI custom designs and manufactures a variety of heat exchanger products. Heat exchangers have been a primary component of our recuperative thermal oxidizers and our catalytic oxidizers for over 43 years now. An extension of this expertise has allowed CPI to become one of the leading suppliers of custom heat exchangers for process recovery solutions. Our heat exchanger primary focus is in the air-to-air medium, with an emphasis on Shell and Tube Heat Exchangers and Plate and Frame Heat Exchange

Floating Tube Heat Exchanger

CPI manufactures a revolutionary shell and tube heat exchanger. The Floating Tube Heat Exchanger is standard equipment in our Quadrant SR and SRS Series Thermal Oxidizer’s and has found success in other heat recovery applications. The Floating Tube Heat Exchanger is unlike any shell and tube heat exchanger. It is specially designed to be completely stress-free to promote longer equipment life and virtually no maintenance. Special designs are...

Fluid Heating Heat Exchanger

CPI has expanded upon our success of our shell and tube heat exchangers and plate and frame heat exchanger by developing expertise with several fluid heating mediums. Many applications can benefit from the use of additional heat recovery techniques. In many cases, fluid heating systems represent very efficient recovery methods. Catalytic Products International, Inc. has over 43 years of heat recovery expertise.

Plate & Frame Heat Exchanger

CPI has expanded the success of our FLOATING TUBE HEAT EXCHANGER towards the development of our Plate and Frame Heat Exchanger. The Plate and Frame Heat Exchanger’s we design and manufacture are robust designs that routinely see high temperature service. These systems can provide high thermal rate efficiency in typically smaller footprints than shell and tube counterparts.

Catalytic Incinerators

Catalytic Products International, Inc. is a worldwide leader in the design, manufacture, and installation of high quality air pollution control equipment. Our fume incineration systems are used in a variety of stationary source applications designed to destroy volatile organic compounds (VOC's), hazardous air pollutants (HAP's), odors, and other air toxics, keeping your operations compliant with the world's most stringent air quality regulations.

Concentrators

Rotary Concentrators are designed to take large volumes of air containing a very low concentration of volatile organic compounds and adsorb these organic materials onto a zeolite adsorbent “wheel”. This wheel constantly rotates, and the concentrated VOCs are removed and treated by one of our world-leading VOC treatment systems

Rotary Concentration System (RCS) Concentrators

For more than 43 years, Catalytic Products International has focused its efforts on supplying our customers with the worlds best air pollution control solutions. In today’s environmental climate, just about any source may be a target for add-on air pollution control equipment. As polluting sources become larger (volumes) and less concentrated, Catalytic Products International, Inc. has introduced the RCS – Rotary Concentator System.

CPI - Filtration Systems

Catalytic Products International, Inc. has developed the SENTINEL Filtration System as an efficient and cost effect means for particulate and aerosol elimination from a variety of industrial exhaust streams.

Catalyst

CPI designs and manufactures custom catalyst and catalyst retrofit systems for VOC, CO, and NOx from a variety of industrial and generating industries. The METAC Catalyst Products Group is staffed by a number of experienced professionals with a proven background in application chemistry and analytical experience. CPI began over 43 years ago as a supplier of custom catalyst formulations. Today we continue our long history of catalyst application sales and service along side our Air Pollution Con

CPI - METAC Catalyst

CPI has been manufacturing precious metal catalyst for over 43 years and holds 14 patents for formulations or manufacturing techniques. The basis of the manufacturing process includes techniques to disperse the active precious metals over a large surface area. The METAC family of catalyst are precious metal based and include such Nobel metals as; platinum, palladium, and others electroplated onto a proprietary carrier metal. Depending on the desired...

CPI - Ceramic Formulations

Besides our line of all-metal-catalyst products, CPI is a leading supplier of ceramic supported catalyst products. These products, including bead and monolith formulations, are used in a variety catalytic oxidizer and reactor systems. Choose from the following formulations for VOC, CO, NOx, or other air toxics reductions.

Pre-Owned Equipment

VECTOR - Model 1e - Catalytic Oxidizer

This Pre-Owned VECTOR 1e Catalyic Oxidizer has NEVER BEEN COMISSIONED! This all-electric model is designed to handle up to 1000 scfm, and requires no natural gas! Call CPI for an estimate today!.

VECTOR - Model 4,0000 - Catalytic Oxidizer

This Pre-Owned VECTOR 4 is ready for your application! With a capacity of 4,000 scfm and a heat exchanger that can attain up to 67% thermal efficiency, this unit will provide 95% Destruction Rate Efficiency for a low price, and at a low monthly cost as well.

Model 6.60 - Floating Tube Heat Exchanger

We have available one of our revolutionary FLOATING TUBE Heat Exchangers. This unit is capable of handling up to 6,000 scfm, and delivers a 60% thermal efficiency. It was designed to be mounted on top of one of our thermal oxidizers, but can be modified to fit a number of other configurations.

QUADRANT - Model SR 25,000 Series - Thermal Oxidizer

The QUADRANT SR-Series Thermal Oxidizer is unlike any traditional thermal oxidizer. The system employees numerous features that have been developed and improved upon for over three generations. The foundation of the QUADRANT SR-Series Thermal Oxidizer is our proprietary FLOATING TUBE PRIMARY HEAT EXCHANGER. This design eliminates thermal stress and fatigue by allowing each individual tube to expand and contract at its own rate. No one else has this...

QUADRANT - Model NR 10,000 Series - Thermal Oxidizer

A Pre-owned QUADRANT Series Thermal Oxidizer is available for your application. This is one of the most simple and direct technologies we offer, and is available for significantly less than a new oxidizer.

Thermal Combustor System

The Thermal Combustor System is a market driven answer to a unique set of vapor combustion air pollution control questions. Highly concentrated vent gas emissions are common within the natural gas processing and production, petro-chemical, and chemical processing, industries. These emissions are commonly low in volume but very high in concentration. Historically answers to these emissions challenges have included inefficient and dangerous flare...

27 Products found
Environmental XPRT is part of XPRT Media All Rights Reserved
Subscribe