|
|
PRODUCTS
Product / Service Lines:
Dissolved Oxygen Analyzers
|
Triton - DO8 - Dissolved Oxygen AnalyzerThe ECD Triton DO8 optical dissolved oxygen sensor combines the high technology of Fluorescence Quenching with a rugged, easy to install design. The DO8 provides the best solution for long term measurements in aeration basins, aquaculture and all types of environmental water. » Read more » Contact now / Request quote 0 Comments » Downloads(2) |
|
Triton - DO9 - Dissolved Oxygen AnalyzerThe Triton D09 is designed for the continuous measurement of trace levels of dissolved oxygen in aqueous systems. The primary application of the Triton D09 is in the monitoring of boiler feedwater. Oxygen should only be present in trace quantities, excessive concentrations of oxygen can result in corrosion damage to the components of the Steam Cycle. Boiler feed water is thermally and chemically degassed to achieve oxygen-free water. This state must... » Read more » Contact now / Request quote 0 Comments » Downloads(1) |
HYDRA Nitrogen Analyzers
|
HYDRA - Nitrate AnalyzerThe HYDRA Nitrate Sensor is designed to monitor the nitrification process directly in the aeration basin or clarifier of a Waste Water Treatment Plant. The HYDRA uses ISE technology to measure the Nitrate and Chloride. Compensation for the chloride ion interference on the nitrate electrode is preformed automatically in the HYDRA C22 analyzer. Also available with an optional pH sensor. » Read more » Contact now / Request quote 0 Comments » Downloads(4) |
|
HYDRA - Ammonium AnalyzerThe HYDRA Ammonium Analyzer measures the concentration of dissolved ammonium as nitrogen (NH4+-N) in water. The sensor uses three electrodes to determine the NH4+-N concentration, an Ammonium Ion Electrode, a Potassium Ion Electrode and a pH Electrode. It is designed for use in all kinds of water. Typical applications include monitoring environmental waters, lakes, streams and wells as well as wastewater treatment in aeration... » Read more » Contact now / Request quote 0 Comments » Downloads(4) |
Chlorine Analyzer Series
|
FCA-22 - Free Chlorine AnalyzerThe Model FCA-22 Free Chlorine Analyzer provides on-line continuous measurement of free chlorine in most aqueous environments. ECD's advanced sensor and controller technologies allow installation and commissioning to be completed in just a few simple steps. The design criterion for the FCA-22 was high accuracy with a minimal maintenance requirement. » Read more » Contact now / Request quote 0 Comments » Downloads(3) |
|
TCA-22 - Total Chlorine AnalyzerThe Model TCA-22 Total Chlorine Analyzer is designed for use in drinking water, industrial cooling and rinse water, wastewater or other fresh water samples containing chlorine in the range of 0-20 ppm. The Total Chlorine Sensor (TCS) is a three electrode amperometric sensor that measures all chlorine species in the water, combined chlorine and free chlorine. » Read more » Contact now / Request quote 0 Comments » Downloads(2) |
|
CDA-22 - Chlorine Dioxide AnalyzerThe Model CDA-22 Chlorine Dioxide Analyzer is designed for use in drinking water, industrial cooling and rinse water, wastewater or other fresh water samples. The Chlorine Dioxide Sensor is a three electrode amperometric sensor that measures dissolved chlorine dioxide from 0.05 to 20 ppm ClO2. » Read more » Contact now / Request quote 0 Comments » Downloads(2) |
|
DCA-23 - Seawater Chlorination/Dechlorination AnalyzerThe Model DCA-23 is a single purpose analyzer designed to monitor the chlorination and/or dechlorination of sea water from 0.00 - 2.00 ppm. The DCA-23measures the pH, temperature and the TRO potential of the sea water and then displays an equivalent chlorine concentration as Cl ppm. The measurement range of the analyzer is limited to 0.00 ppm to 2.00 ppm Cl in seawater. The DCA-23 is not suitable for fresh water service. » Read more » Contact now / Request quote 0 Comments » Downloads(1) |
|
CA-6 Series - Colorimetric AnalyzersThe CA-6 Series Analyzers are a family of online sequential sampling analyzers that use Colorimetric or Ion Selective Electrode (ISE) technologies to perform ananalysis. The analyzers can be configured to perform most colorimetric or ISE-based laboratory analysis that use up to four reagents. » Read more » Contact now / Request quote 0 Comments » Downloads(1) |
Two Wire Transmitters
|
T23 Series - Two Wire TransmitterThe T23 Series Smart Transmitter is a loop powered two-wire process transmitter that has been designed and manufactured to provide liquid process measurement and control in its simplest form. A choice of measurement parameters include: pH, ORP, Specific Ion, Dissolved Oxygen, Conductivity and Resistivity. The economical T23 Transmitter can be installed, wired, calibrated and ready to use in minutes. » Read more » Contact now / Request quote 0 Comments » Downloads(7) |
|
T28 Series - Two Wire TransmitterThe T28 Series Smart Transmitter is a loop powered two-wire process transmitter that has been designed and manufactured to provide liquid process measurement and control in hazardous locations. A choice of measurement parameters include: pH, ORP, Specific Ion, Dissolved Oxygen, Conductivity or Resistivity. With its highly intelligent microprocessor design and durable stainless steel enclosure, the T28 is simple to install, calibrate and use in... » Read more » Contact now / Request quote 0 Comments » Downloads(8) |
|
System 22 Smart ControllerThe System 22 Smart Controller, the C22, features ECD's advanced Multi-Bus architecture. The Multi-Bus design enables customization of up to four inputs and six outputs in a convenient 1/2 DIN NEMA 4X enclosure. Channel comparisons or measurement compensation, configurable conductivity concentration curves, the graphical display of data and PID control on the outputs or up to 8 optional SPDT relays are just a few of the powerful features in this easy... » Read more » Contact now / Request quote 0 Comments » Downloads(5) |
Sensors + Electrodes
|
Triton - TR8 Series - Nephelometric Turbidity SensorThe Triton TR8 is a nephelometric turbidity sensor designed for use in water and wastewater. The Triton TR8 uses an optical method for determining the turbidity, a light beam is directed into the sample where it is scattered by suspended particles in the water. The Triton TR8 uses a long lived near infrared LED light source (880 nm) and the 90° scattered light method in accordance with ISO 7027 / EN 27027. The Triton TR8 sensor has self monitoring... » Read more » Contact now / Request quote 0 Comments » Downloads(2) |
|
S10 and S17 Series - pH, ORP, DO, pION, Resistivity and Conductivity ElectrodesAll pH, ORP, DO, pION, Resistivity and Conductivity electrodes are available in either the S10 or S17 sensor style housings. The S10 and S17 sensors are field rebuildable and repairable. They are designed for ease of use and reliable performance. Various materials of construction are available to maximize sensor performance while minimizing cost of ownership. » Read more » Contact now / Request quote 0 Comments » Downloads(5) |
|
Sentinel Series - Liquid Analytical SensorsThe Sentinel Series of liquid analytical sensors features breakthrough pre preHault diagnostic technology. The Sentinel's unique design provides 'insitu' diagnostic status of the sensor electrode's internal reference cell and liquid junction for predictive maintenance to reduce process downtime. The Sentinel Transmitter is two-wire loop powered with a choice of pH, ORP or Specific Ion measurement parameters and can be installed, wired, calibrated and... » Read more » Contact now / Request quote 0 Comments » Downloads(8) |
|
ORP Sensor SeriesThe ECD ORP sensor is a simple, cost-effective design that combines high performance with low life cycle costs. The ORP sensor is designed without glass allowing for a wide range of harsh applications. ECD offers several rebuildable ORP sensors designed for high accuracy measurement with the lowest total cost of ownership. Our ORP sensors are designed without glass and have been proven in a wide variety of the most severe applications. » Read more » Contact now / Request quote 0 Comments » Downloads(7) |
|
pH Sensor SeriesECD offers a broad line of rebuildable pH Sensors designed for high accuracy measurement with the lowest total cost of ownership. Our pH Sensor designs have been proven in a wide variety of the most severe applications. » Read more » Contact now / Request quote 0 Comments » Downloads(11) |
Dissolved Oxygen Sensors
|
Optical DesignThe ECD Triton DO8 optical dissolved oxygen sensor combines the high technology of Fluorescence Quenching with a rugged, easy to install design. The DO8 provides the best solution for long term measurements in aeration basins, aquaculture and all types of environmental water. » Read more » Contact now / Request quote 0 Comments » Downloads(2) |
|
|
ECD - DOS10 and DOS17 Series - Dissolved Oxygen (DO) SensorThe ECD Dissolved Oxygen (DO) sensor design is a simple, cost-effective approach that combines high performance with low life cycle costs where only the spent DO cartridge itself need be replaced. » Read more » Contact now / Request quote 0 Comments » Downloads(3) |
|
Specific ION Series SensorsThe ECD pION (Selective Ion) sensor is a simple, cost-effective design that combines high performance with low life cycle costs. The pION sensor is designed for a wide range of applications. ECD offers reliable sensors to detect Ammonia, Ammonium, Bromide, Cadmium, Calcium, Chloride, Copper, Cyanide, Fluoride, Potassium, Sodium and Sulfide. Our wide selection of rebuildable pION sensors are designed for high accuracy measurement with the lowest total... » Read more » Contact now / Request quote 0 Comments » Downloads(4) |
Conduct + Resist
|
Contacting DesignThe ECD CS10/17 and RS10/17 Conductivity and Resistivity sensors cover the full measurement range from High Purity water to concentrated brines. Constructed of 316 Stainless Steel (Std.), Titanium or Hastelloy with PVDF insulators and dual o-ring seals of your choice. » Read more » Contact now / Request quote 0 Comments » Downloads(3) |
|
Toroidal (Non Contacting) DesignToroidal Conductivity is an inductive measurement made between two coils inside the sensor that are inductively coupled through the surrounding solution. The ECD Toroidal CS10/17 sensors are 0.75' diameter and made of PVDF, ideal for high conductivity solutions like % concentration measurements or any application that coats or corrodes the standard contacting conductivity sensors. » Read more » Contact now / Request quote 0 Comments » Downloads(2) |
|
CSX2 - Conductivity SensorThe ECD Model CSX2 conductivity sensor is designed for high pressure, high temperature conductivity measurements. It is an ideal choice for boiler control applications, blowdown control, condensate monitoring, leak detection on heat exchangers, and steam purity measurements. » Read more » Contact now / Request quote 0 Comments » Downloads(2) |
Steam Sterilizable Products
|
Steam Sterilizable Electrode and FittingsThe Pharmaceutical and Biotech industries have numerous applications requiring the measurement of pH and conductivity.The ECD steam Sterilizable Electrodes (SE) and Sterilizable Fittings (SF) provide a reliable and economical solution for these measurements. » Read more » Contact now / Request quote 0 Comments » Downloads(1) |
|
SE Series - Retractable HousingThe assembly has been designed as a sterilizable retractable assembly for food stuffs, biotechnology, pharmaceutical and other process applications with high demands on sanitation and hygiene. » Read more » Contact now / Request quote 0 Comments » Downloads(1) |
|
2122 System - Cooling Tower ControlThe Model 2122 Cooling Tower Control System (CTCS) from ECD is an integrated system designed to control the acid feed, blow down and inhibitor/biocide feed to a Cooling Tower. Acid feed is controlled via pH, blow down is controlled via Conductivity (TDS) and inhibitor is fed on a user selectable timed basis. Both the period and dose time are easily configured by the user. » Read more » Contact now / Request quote 0 Comments » Downloads(5) |
|
ECD - Model 61 - Automatic Boiler Blowdown Control SystemThe Model 61 Automatic Boiler Blowdown Control System from ECD provides a reliable solution for the continuous control of the surface blowdown rate for commercial and industrial boilers. All system components, except the sample system, can be supplied in carbon steel, NEMA 4 cabinet. » Read more » Contact now / Request quote 0 Comments » Downloads(2) |
|
ECD - Portable Analyzer And Calibrator InstrumentationECD's portable analyzer / calibrator product lines are a simple convenient way to obtain fast, accurate pH, ORP or conductivity measurements. They provide a milliVolt output signal for fast field analysis of samples, calibration verification, or trouble-shooting of installed sensors. » Read more » Contact now / Request quote 0 Comments » Downloads(2) |
|
ECD - Model H10 and H10C - Handheld pH/ORP/Temperature MeterThe Model H10, pH/ORP/Temperature meter and the Model H10C, Conductivity/Salinity/TDS/Temperature meter are battery powered microprocessor based precision instruments. The Model H10 features auto buffer recognition during calibration, automatic temperature compensation and it monitors the electrode's slope and offset reporting the electrodes efficiency. The Model H10C uses a 4 wire conductivity electrode that measures from 0.001 to 200 mS. The H10C... » Read more » Contact now / Request quote 0 Comments » Downloads(1) |
Accessories
|
AC10 - Air Blast Spray CleanerThe AC10 is a self contained, relay activated air compressor. The AC10 combined with a Sensor Spray Head and a C22 Analyzer / Controller uses pressurized air to generate an area of high turbulence in the water surrounding the measurement end of the sensor. The turbulence is suitable for removing biofilms and other soft coatings. » Read more » Contact now / Request quote 0 Comments » Downloads(1) |
Specific ION Series Sensors
|
ECD pION - MVS10 / MVS17 - Selective Ion SensorThe ECD pion (Selective Ion) sensor is a simple, cost-effective design that combines high performance with low life cycle costs. The pion sensor is designed for a wide range of applications. ECD offers reliable sensors to detect Ammonia, Ammonium, Bromide, Cadmium, Calcium, Chloride, Copper, Cyanide, Fluoride, Potassium, Sodium and Sulfide. Our wide selection of rebuildable pion sensors are designed for high accuracy measurement with the lowest total... |
|
TR6 - New Intelligent Triton Turbidity SensorWith advanced optical infrared (IR) sensing and intelligent electronics, the versatile Triton TR6 Turbidity Sensor from Electro Chemical Devices, Inc., measures turbidity or suspended solids and can be combined with ECD’s two-channel C22 Analyzer to monitor pH, ORP, DO, conductivity, pIon and more. |
