PRODUCTS

22 Products found

Data Logger

BIDI Logger Noise monitoring system

The new BIDI Logger System from F.A.S.T. GmbH sets a quantum jump in the effective detection of leakages on water distributen networks. The easy and clear operation with a lot of new functions like Bi-directional programming and possibility of correlation gives the operator enough control to detect and locate leakages in the shortest possible time.

Watercloud - GPRS Leakage Monitoring System

Watercloud is the complete leakage control solution for water companies. With this system the noise loggers are transmitting their data independently onto a cloud based data base. There all the information can be accessed anywhere at anytime. With the independent transmission the working time for leak detection can be reduced to a minimum.

AZ 100 Leakmaster

Acoustic Zone Monitoring. Speedy leakage locating process from a mobile unit. Reduction in personnel costs - only one operator required. High operating efficiency - battery lifetime of about 10 years.

AZ Light: Receiver for AZ-Radio Loggers

AZ-light will help you efficiently to reduce water losses and significantly to cut on personnel costs

Drulo II Pressure Logger

Pressure gauge meeting all requirements. Solid watertight housing (no plug contracts). Foil-protected keyboard for on-the-spot programming. Extremely high memory capacity for more then 240.000 measurement values. Failure rate less than 0.1% of final value at 20°C. Data transfer via infrared / GSM and infrared / USB. 10 year battery lifetime.

Correlators

Lokal 200 PC Digital 3 Point FFT Correlator / / Leakage Detection System

State of the Art Correlator. Real 500 mW Radio power, FFT-Function, coherence function, 3 point correlation, GPS- supported data collection and archiving. Also receives AZ-Radio loggers.

Lokal 300/2 Multi-Functional Geo-Correlator / Leakage Detection System

Measure Principle: Multi-functional Correlator. The multifunctional F.A.S.T.-LOKAL 300 leakage detection system is applied to detect leakages (correlation and geophone) on drinking-water networks and to trace out pipelines. Simple operational handling enables even unskilled operators succesfully to locate leakages.

Leakage Detection

Aqua M-300D Inteligent Geophon For Leak Detection

Daylight readable Color Display with LED Backlight. Pyramid mode, 256 analog and digital filter stages, automatic function for filtering and amplification, long term measurement, tracer gas leak detection.

PipeMic For leak detection/pipe tracing

The two in one device PipeMic was specially developed for leakages where utmost precision is required. It´s a breeze to locate the exact leak spot. With the posibility to trace the Glass fibre and the end point makes it a unmissable instrument for plastic pipes where the run is unknown.

Aqua M-200 Geophone To Detect And Locate Leakages

Range of Use: The Aqua M-200D is used in the water supply business to prelocate (testrod) and to calibrate leakages (geophone). In combination with the Pulse Wave Generator (PWG), it can also be applied to trace the run of a pipeline.

Aqua M-100 Geophone To Detect And Locate Leakages

Range of Use: The Aqua-M100D is used in the water supply bussines to pre-locate (testrod) and to calibrate leakages (geophone). In combination with the Pulse Wave Generator (PWG), it can also be applied to trace the run of a pipeline.

Aqua M-70 Geophone To Detect and Locate Leakages

Range of Use: The Aqua M70-D is applied in the water supply business to prelocate (testrod) and to calibrate leakages (geophone).

Aqua M-50D To Pre-Locate Leakages

Testrod to pre-locate leakages in drinking-water supply networks. The Aqua-M50D is applied in the water supply business to pre-locate (testrod) leakages. Due to its handy size, this measuring instrument is especially well suited to listen to water meters.

Aqua M-40 To Pre-locate Leakages

Testrod to pre-locate leakages. This noise measuring device has been developed by F.A.S.T GmbH. It features an extremely high sensitivity and is thus capable of detecting even minute leakages due to the combination of a high-sensitivity vibration pick-up and adapted amplification.

HM Mechanical Listening Stick To Pre-locate Leakages

Even today with all the sophisticated technology around, mechanical measurement instruments still have their right to exist. A lot of application fields do not require any sensitive electronics. Quite often it is far more reasonable and practical to apply solid mechanics with the following advantages: No inherent noise, not dependent on any power supply, shock-protected, water-insensitive.

GasCheck-H2 tracer gas detector

Searching for minutes leakages with the Gas-Check - H2. With the Gas-Check-H2 even tiny little leakages can be pinpointed. Hydrogen diffuses through almost any material due to its molecular size. The pipeline section to be checked is filled entirely with gas, and the pressure is increased slowly until the measurement varies according to the size of the leakage, the kind of soil, and the surface structure. The leakage on the pipeline will be below the the...

Pipe Searching

PipeMic To leak detection/pipe tracing

The two in one device PipeMic was specially developed for leakages where utmost precision is required. It´s a breeze to locate the exact leak spot. With the posibility to trace the Glass fibre and the end point makes it a unmissable instrument for plastic pipes where the run is unknown.

PWG/2 Pulse Wave Generator

Searching for pipes with the PWG Pulse Wave Generator. Suitable for all pipe materials such as PVC, PE, AZ, cast iron, steel etc. No disturbance due to electric cables. Low energie requirements. Extended lifetime. The PWG pipe locating system consists of a receiver (geophone) and an electronic pulse generator PWG to be screwed on a water pipeline or on a hydrant. This system allows location non-metal pipes running up to 2 metres below the surface....

Measurement

MD-100 Ferrous Metal Detector

The MD-100 sets the new benchmark when it comes to the detection of metallic objects. Even small parts made of metal can be detected quickly, easily and precisely.

FlushInspect Water Turbidity Measurment

Water distribution infrastructure needs to be flushed from time to time to get rid of sediments and to avoid customer complains because of brown water. Often the whole network is flushed yearly - with high labour costs and amount of water lost during the process of flushing. With the model 'FlushInspect' water companies have the solution right on hand to only flush on the basis of the actual condition of the water network. A special developed...

ZM Capacity and Inflow Measurements

Capacity and Inflow Measurements. Objective acquisition of waste quantities. Determination of metered values to establish measuring zones. Determination of night-time minimum consumption. Capacity analysis of hydrants.

Water Test Van

Specialized vans for the supply industries For over 20 years we build special vehicles for utility companies and service enterprises. Thanks to our modular and robust lightweight construction nearly all customer wishes are realizable.

22 Products found
Environmental XPRT is part of XPRT Media All Rights Reserved
Subscribe