6 Products found

Kynar PVDF Jet Aerator - Kynar PVDF Jet Aerator For Improved Wear Resistance

Ten years ago, KLa Systems was presented with the challenge of finding a more wear-resistant material for our jet aeration nozzles. The inner nozzle (see above) is the liquid propulsion nozzle of the jet aerator and continuously sees high volumes of motive liquid flow at velocities ranging from 33-46 ft/s. Traditionally, these inner jet nozzles were made from the same FRP material as the outer jet with the industry accepted corrosion/abrasion liner...

Slot Injector - Superior Jet Aeration System

Introduced in 1979 by Bayer AG, the Slot Injector is similar to a modern jet aerator but uses a slot-shaped configuration to achieve higher efficiencies. The slot-shaped nozzle and mixing chamber provide a greater shear surface for mass transfer than a circular jet opening of identical area.

KLa - Jet Aeration System

Jet Aerators transfer oxygen by simultaneously introducing large volumes of high kinetic energy liquid and air through a series of jet nozzles. The high velocity liquid exits the inner, primary jet and rapidly mixes with the incoming air in the outer jet. This intense mixing and high degree of turbulence in the gas/liquid cloud travels outward from the jet along the basin floor prior to the vertical rise of the gas bubble column to the liquid...

KLa - Jet Mixing System

Jet Mixers offer superior independent control of mixing and oxygen transfer in aerobic/anoxic processes and creates excellent energy distribution while minimizing power input in large tanks. This mixing technology results in better energy distribution and decreased reaction times.

KLa - Floating Effluent Decanters Systems

KLa Systems floating Effluent Decanters are used to draw clarified liquid from near the liquid surface of sequencing batch reactors and aerobic digesters. The design is both simple and rugged, constructed of Type 304L stainless steel for the weir, draw-off pipe, swing joint support, and stop supports.

KLa - Complete Systems

A typical system consists of the slot injector aerators, jet mixers or jet aerators complete with in-basin piping system, back-flush system, liquid recirculation pumps and air blowers. The pumps supplied are either end suction centrifugal, submersible, or self-priming. Low pressure air is delivered by positive displacement blowers, screw compressors, multi-stage or high speed centrifugal blowers.

6 Products found
Environmental XPRT is part of XPRT Media All Rights Reserved