Products and Equipment from Retech Recycling Technology Sweden AB on Environmental Expert

Environmental Expert eBulletin Subscriptions Environmental Expert RSS Feeds Environmental Expert Facebook Environmental Expert Twitter Environmental Expert LinkedIn

Find us on

Retech Recycling Technology Sweden AB

Jägersrovägen 219
MALMÖ 21377 Sweden

PRODUCTS

Product / Service Lines:

Cable Recycling Plants

Single Machines

14 Products found

Cable Recycling Plants

System REDOMA offers a proven solution for efficient and profitable cable recycling. Our motto is 'From Cable to Cash' - because a REDOMA plant transforms useless cable scrap into valuable products of high purity, such as copper, aluminium and plastics.

THUNDERHAWK - Mini-Plant For Cable Recycling

Our new THUNDERHAWK mini-plant for cable recycling offers a simple and efficient chopping line for small recyclers with a limited budget. Just plug it in and start recycling your cable scrap right away. Very compact design, yet every machine is easily available for service. Robust like all REDOMA plants.

POWERCAT - Cable Recycling Plants

The POWERCAT plant may be small in size, but it is full-grown in performance, yielding an exceptional purity of both metals and insulation. It makes cable recycling remarkably cost-efficient and profitable - even for smaller scrap dealers. The purity of recovered copper and aluminium is normally above 99.5%. The POWERCAT has all the efficiency and proven quality of the larger REDOMA plants, but is compactified in a user-friendly and robust turn-key...

FIREFOX - Cable Recycling Plant

The FIREFOX cable recycling plant stands for flexibility and superior technology, respected all over the world. It is a smart modular system that offers flexible solutions for your needs both today and tomorrow. It is designed for medium-size companies and comes in several different models, depending on your required capacity. The smallest plant in this series, called FIREFOX A, offers an average input capacity of 0.38 t/h, whereas the...

Single Machines

BEAVER - Cable Stripper

By using unique springloaded feed rolls you no longer need to make fine adjustments for different cable sizes. It is sufficient to make a rough adjustment only, and this you can do very easily by means of a handle. Just feed the cable and it will be stripped without any problems, whether the insulation is rubber, lead, paper, PVC or PE. Deformed lead cable which is flattened and crooked can be handled with no special preparation. The cutting depth is...

PANTHER - GR45 - Granulator

The Granulator GR 45 (“PANTHER”) is designed for mall and medium-size plants, such as the POWERCAT and FIREFOX as well as for larger REDOMA cable recycling plant. Built for tough performance, it has proven its high quality and sturdyness in operations all over the world. The machine is mounted on a steel base plate and does not require any special foundation. Depending on capacity and your requirements, the Granulator GR 45 can be...

LOBSTER - HS 120 - Portable Hydraulic Shear

The Hydraulic Shear is used for efficient cutting of copper, aluminium, lead and underground cables. It can also be used for cutting of steel, max. diameter 20 mm. It is an indispensable tool for example when cables need to be unloaded, pre-sorted or pulled apart. The shear is very handy and easy to operate. It consists of the following main parts: cutting head with 2 blades, hydraulic cylinder, 5 meter hose with quick-connectors, hydraulic pump with...

WHALE - Screening Machine SM320/400/480

The Screening Machine is used for recovery of copper losses from the insulation of granulated cable. It is installed as an optional equipment in every REDOMA plant. It is placed after the separator. It is available in three different sizes, matching the capacity of our various small and medium-sized plants. By means of a mechanical process, the larger part of the copper is screened out in the form of dust and fine wires. It is a simple but efficient...

FALCON - SE60 - Separator

The Separator SE60 (“FALCON”) forms the central part of a SYSTEM REDOMA cable recycling plant, separating the granulated cable into its two components: metal and insulation. The separator employs the air sifting principle, i.e. separation is achieved by using the difference between the density and the size of the particles. The vertical air flow and the vibrating movement of the separating screen causes the granules to “float”...

VF2600/4800 - Storage Bin With Vario-Conveyor

The storage bin is used for automatic and even feeding of the granulator(s) in order to obtain maximum throughput. It also serves as an intermediate storage. The cable must be pre-chopped before it is fed into the machine. This can be done, for example, in a REDOMA Rough Chopper, equipped with a grid. The drive motor is electrically interlocked via the overload relay of the granulator(s). The discharge rate is adapted to the capacity of the plant to...

PANTHER - GR37 - Granulator

The Granulator GR 37 (“PANTHER”) is specially designed for the small cable recycling plant POWERCAT. Depending on the local power supply and required capacity, the machine can also be equipped with a motor of 30 kW. Built for tough performance, it has proven its high quality and sturdiness in operation in many plants all over the world. The machine is mounted on a steel base plate and does not require any special foundation. The design is...

LION - GR75/90 - Granulator

The Granulator GR75 (“LION”) with its unique features are esteemed by professionals over the world. It is a robust and reliable machine designed for tough operation and high capacity. The GR75 is mostly used in the large REDOMA 2000 cable recycling plants. This granulator can be installed one or two or more in different combinations – in line and/or in parallel position – depending on the capacity required. The...

CROCODILE - RC110/160 - Rough Chopper

Rough Chopper RC110 is best suited for the throughput of a FIREFOX recycling plant. And the RC160 is suitable for the high throughput of the largest REDOMA plants. The design is extremely robust with an extraordinary cutting strength. It is like a crocodile – with sharp, triangular teeth – that quickly devours all kinds of cable. The rough chopper is preferably fed by means of a grab. Cables are cut into finger-size pieces, ideally suited...

FALCON - SE40 - Separator

The Separator SE 40 (“FALCON”) forms the central part of our POWERCAT cable recycling plant, separating the granulated cable into its components: metal and insulation. The mix (intermediate fraction) goes back in a loop for regranulation. The separator employs the air sifting principle, i.e. separation is achieved by using the difference between the density and the size of the particles. The vertical air flow and the vibrating movement of...

EAGLE - SE120/200 - Separator

The Separator SE120 / SE200 (“EAGLE”) forms the central part of a REDOMA 2000 cable recycling plant. It separates granulated cable into its two components: metal and insulation. The separator employs the air sifting principle, i.e. separation is achieved by using the difference between the density and the size of the particles. The vertical air flow and the vibrating movement of the separating screen causes the granules to...

14 Products found