PRODUCTS

59 Products found

Environmental Radiation Monitoring Systems

The environment is one of today’s foremost concerns, and its preservation is among the biggest challenges we need to meet in coming years. Saphymo offers a series of global solutions designed to detect the impact of a nuclear accident on the environment and local populations, and hence facilitate crisis management.

GammaTracer - Stand-Alone Dose-Rate Monitoring System

With the autonomous measuring probe GammaTRACER the gamma radiation dose is continually registered in the chosen time sequence. Available types –BASIC, WIDE, HIGH and XL differ mainly for the counter tubes. They cover a broad range of applications, are lightweight and therefore ideally suited for both, mobile and stationary tasks. GammaTRACER XL incorporates a high-volume GM-tube, which qualifies it for applications requiring high sensitivity.

SpectroTRACER AQUA - Environmental Gamma Spectroscopic Probe in Water

SpectroTRACER AQUA is a continuous measurement system for spectroscopy in water from very low gamma contamination (for water: SpectroTRACER-AQUA).

SpectroTRACER - Intelligent Gamma Spectroscopic Probe

SpectroTRACER is a continuous measurement system for very low gamma contamination of air (for water: SpectroTRACER-AQUA). The device performs a spectrometric analysis of the measurement to identify the radionuclides detected. SpectroTRACER isused for air monitoring when a standard gamma dose rate monitor is not efficient enough and when it is necessary to qualify the nature of the gamma radiation.

Saphymo - Model BAB-E - Particulate Emission Environment Aerosol Monitor

The BAB-E particulate emission monitor is designed for a continuous control of α and β radioactive artificial particulate activity in the air. It has been developed on the basis of the famous BAB aerosol category, which qualities are not to be proven anymore, still used in a lot of countries. The BAB-E is the result of more than 30 years of experience in the development of large surface silicon diode detectors.

Saphymo - Model GAM210 E - Gamma Environment Measurement Station

The Gam210 E gamma monitor is designed for a continuous measurement of very low gamma dose rate in the environment. When one of the pre-set threshold levels is exceeded, the monitor displays the dose rate and triggers the alarms. The GAM210 E monitor is part of the SYSRAY RMS technology.

ALPHAGUARD - Professional Radon Monitor System

AlphaGUARD is a portable equipment designed for instantaneous or continuous measurement of radon gas activity (Rn-222). AlphaGUARD is used for the measurement of Radon in the environment, mines, laboratories and also for complementary investigations in buildings. Air, water, soil, exhalation measurements are performed thanks to a large range of accessories and external probes. DataEXPERT software performs data analysis and storage.

ShortLINK - SkyLINK - Remote Environment Monitoring Platforms

ShortLINK and SkyLINK systems are remote monitoring platforms that ensure data transmission through a radio network. It generally includes a real-time radiological control network that features autonomous probes (such as GammaTRACER probes), and the DataExpert supervision software. The system structure allows its use in every situations, even in the most accidental ones (private wireless communication network and easy-to-install autonomous pobes ).

Radon Exposimeter Alpha - Professional Exposimeter for the Personal Radon Exposure

The AlphaE is an ultra small continuous radon monitor for professional use. Due to the light-weight and small dimensions it can perfectly be used to measure the personal radon exposure and to manage personal doses. Based on a silicon diode diffusion chamber the sensitivity is 3 cph at 100 Bq/m³. Thus, also low radon levels below 100 Bq/m³ can be measured as specified by the latest WHO recommendations (12 % uncertainty at 1 sigma / 24 hrs.)....

Radiation Survey Meters

Control and analysis devices.

MiniTRACE Gamma - Model S10 / S100 - Portable Survey Meter Device

MiniTRACE γ survey meter is a portable device specially designed for use by Health Physics and non specialized staff. Fast response, light and sturdy. MiniTRACE γ is very suitable to locate radioactive hot spots while giving precise measurement. Electricité de France selected MiniTRACE γ for the measurements in their NPPs.

Saphymo - Model 6150 AD5 - 6150 AD6 - Handheld Gamma and X Radiation Survey Meter

The 6150AD handheld survey meter is designed for gamma and X radiation measurement, for radioactive sources detection in industrial or nuclear facilities. Connected to 6150 AD type probes, it can measure high, low and very low gamma radiation levels, as well as surface contamination.

Saphymo - Model 6150 AD15 - 6150 AD18 - Gamma Dose Rate Measurement Probes

A large range of gamma dose rate measurement probes can be connected to the 6150 AD5 and 6150 AD6 survey meters. 6150 AD15 and 6150 AD18 are particularly well suited for accurate measurements of low and high radiation levels.

Saphymo - Model 6150ADb - High Sensitivity Gamma and X Radiation Probes

A large range of dose rate measurement probes can be connected to the 6150 AD5 and 6150 AD6 survey meters. 6150 ADb is a scintillator probe, particularly well suited for fast and accurate measurements of low radiation levels down to or even below natural background.

Saphymo - Model 6150ADt - Beta and Gamma Telescopic Probe

A large range of dose rate measurement probes can be connected to the 6150 AD5 and 6150 AD6 survey meters. 6150 ADt probes are Beta and Gamma telescopic measurement probes, adapted to any kind of use or intervention.

Saphymo - Model 6150 AD17 - 6150 ADK - Contamination Measurement Probes

A large range of dose rate measurement probes can be connected to the 6150 AD5 and 6150 AD6 survey meters. 6150 AD17 et 6150 ADK  probes are surface contamination measurement probes adapted fit to any kind of use or intervention.

Saphymo - Model DG5 - Gamma Survey Meter

DG5 is a very user-friendly device based on the use of a plastic scintillation detector and a micro controlled electronic ensuring the acquisition and interpretation of the measurements according to the principle of 'quantified information' (CEA patent).

Saphymo - Model SPP2 - High-Sensitivity Survey Meter

The SPP2 is a handheld device specially designed for locating sources, in extremely harsh environment. Its removable pistol-shaped probe is equipped with a NaI scintillator, for a very high sensitivity and a fast response time. With its frequency-modulated audible signal, radioactive products and sources are easy to localize. The SPP2 is a reference field instrument for response teams.

Saphymo Minitrace - Model CSDF - α, β and γ Mobile Contamination Meter

The Saphymo Minitrace CSDF is an unique multipurpose meter for contamination, survey, dose rate, x-rays, food and wipe test measurements. Easy to use, it is the ideal device to simply and quickly identify a potential contamination (cps, Bq, Bq/cm²). This unique Saphymo Minitrace CSDF also offers a special mode for food measurements within two steps. At first, it measures the background and it measures the activity level found in the liquid and...

Minitrace β - α, β and γ Contamination Meter

MiniTRACE β is a contamination meter designed to improve the safety of workers in the control areas of nuclear power plants, reprocessing plants, research centers and hospitals. It can likewise offer strong safety benefits to public bodies like the police, fire brigades or the military. Its simple use makes it easy to detect possible spots of contamination in the controlling areas fast and easy. Electricité de France selected MiniTRACE...

CoMo - Model 170 - 300 - Handheld Contamination Meter

The CoMo is a radioactive contamination measurement instrument. It is used in the medical and the industrial fields (decommissioning sites, for instance). Lightweight, ergonomically shaped and easy to use, the Como is totally suitable for on-field use. When mounted on a wall support, the Como can be installed at the exit of nuclear facilities to be used as a hand contamination monitor. Ambiant gamma dose rate or contamination measurements also be...

Dosimetry Systems

Designed to measure doses absorbed by people exposed to ionizing radiation.

Saphydose Gamma i - Operational Electronic Hp(10) Dosimeter for X and Gamma Rays

Saphydose γ-i operational dosimeter measures the Hp (10) X and γ dose in real time. It can be used individually or as part of our dosimetry management systems. The dosimeter is meant for people working in a controlled area (Nuclear Power Plant, fuel reprocessing plant, research centre, hospital, non destructive testing service …) or likely to be exposed (army, police, fire brigade …). Saphydose Gamma i is appreciated for its...

SkyDose - Teledosimetry System (Team Version)

SkyDose is an operational dosimetric system designed for a real-time monitoring of doses absorbed by a response team working in a high-exposure area. This system can improve intervention conditions, decrease risks and exposure. The mesh-structure network, flexible but sturdy, can reliably cover a whole building (like a reactor building) by attaching routers.

Saphymo - Model LMF3 - Multifunctional Reader for Saphydose Gamma i Operational Dosimeter / Teledosimeter

The LMF3 electronic dosimeter reader is the last generation of dosimeter readers developed by Saphymo. It is the worthy successor of the LMF2, which is operating in every EDF French nuclear plant. The LMF3 is an intelligent self-learning system that allows to read and configure dosimeters, and to send information to the dosimetric management system, in order to regulate access to a controlled area regarding technical...

Radiation Contamination Monitors

Designed to monitor the contamination levels of people, objects and soil.

Saphymo - Model CS28 N CST28 N - α, β and γ Large Surface Floor Contamination Monitor

CS28 N  and CST28 N monitors can simultaneously measure α, β and γ contamination on large surface floors (corridors, parkings, warehouses or roads). They are both mobile, autonomous, and offer a good handling. Cart : CS28 N. Mower-type tractor : CST28 N.

Saphymo - Model CW28 N - α, β and γ Floor Contamination Monitor

The CW28 N is designed to monitor floors contamination. It has been specially developped for Alpha, Beta and Gamma simultaneous contamination control on small and large surfaces. The α, β and γ particles are simultaneously detected and discriminated. Automatic background compensation is performed. The device can be moved around very easily thanks to its 4 rotating wheels. Including a  high-sensitivity large surface detector, the...

Saphymo - Model CV28 N CV28 REN-D - α, β and γ Contamination Monitors

CV28N flow monitors can simultaneously measure α,β and γ contamination. Two versions of the CV28 are available: Stationary version : CV28 N, Mobile version : CV28REN-D. The CV28REN-D is an autonomous and mobile contamination meter that is mounted on a cart for a better mobility.

BANCO - Waste Control and Dismantling Material

The BANCO is an industrial control bench designed to certify the non-radioactivity of any material before or after its integration to the production process. When one of the pre-set threshold levels is exceeded, the monitor displays gamma contamination and triggers the alarms.

CORAFU - Drums Radiological Control

The CORAFU is a processing and display unit used for dose rate measurement in high hamma concentration indoor areas. When one of the pre-set threshold level is exceeded, the unit displays the dose rate and triggers the alarms from the probes, which can be up to 6.

CORALI - Model HG - Horizontal Linen Radiological Control

The CORALI HG is used for the automatic gamma control of small and large objects (linen, food, drinks, electronic or mechanical components...) at the entrance and exit of any nuclear facility.  Including a highly sensitive detector, it can detect even a very low volume activity.  When one of the pre-set threshold levels is exceeded, the monitor displays gamma contamination and triggers the alarms.  The CORALI HG features the same...

CORALI - Model VG - Vertical Linen Radiological Control

The CORALI VG is used for the automatic γ control of large size linen in nuclear facilities. Including a highly sensitive detector, it can detect even a very low volume activity. The CORALI VG includes an industrial linen conveyer to automatically control and discriminate clean linen from contaminated linen. When one of the pre-set threshold levels is exceeded, the monitor displays gamma contamination and triggers the alarms. The CORALI VG...

CORAMAT - Radiation Monitor for Large Objects

CORAMAT is made up of 3 large plastic scintillators and its used for the radiation monitoring of large objects, such as scaffolding tubes. CORAMAT's automated management ensures a permanent, reliable and highly sensitive control of 0.5 cm/s. Each detector is individually managed by an electronic processor which uses an algorithm developped by Saphymo dor optimal detection in a volume of  50 x 50 x 100 cm3 .

Saphymo - Model SOM100 - Small Objects Radiological Controller

The SOM100 radiological controller is intended for a non-contamination control of small objects close to a controlled area. It allows the gamma control of objects up to a size of 50 x 50 x 60 cm³ (HxWxD). The device includes two doors, in order to implement an airlock system. It is shielded on every side for a weaker influence of the ambient gamma background, and automatically calculates the gamma background measurement time after each...

Model LOM100 - Large Objects Monitor

The LOM100 radiological controller is intended for a non-contamination control of large objects close to a controlled area. It allows the gamma control of objects up to a size of 50 x 50 x 90 cm³ (HxWxD). The device is equipped with two 50x40x4 cm3 plastic scintillation detectors.

Model PAB-3R - Wipe α and β Contamination Monitor

The PAB-3R contamination controller measures α and β surface contamination of wipes in high gamma background environments, and compares it with the preset radiological contamination thresholds. If there is no wipe, it measures the ambient background and automatically adapts the measurement time to guarantee a constant measurement accuracy. It is used for non-fixed contamination pre-controls with a large surface sampling, before statutory...

Model PAB-2 - Contamination Smear Test Monitor

The PAB-2 contamination controller measures α and β surface contamination of 51 mm diameter smears, and compares it with the preset radiological contamination thresholds. If there is no smear, it measures the ambient background and automatically adapts the measurement time to guarantee a constant measurement accuracy. It is used for non-fixed surface contamination points statutory search of materials, parcels, etc... leaving a controlled...

Access Control/Clearance Monitors

Designed to perform radiological controls on pedestrians and vehicles (railcars, trucks, boats,etc.).

CORIOLIS - Model C2 Type - Whole Body Contamination Monitor

The CORIOLIS whole body contamination monitor can detect traces of contamination in any person leaving an access-controlled area or site within a nuclear facility. CORIOLIS uses a new generation of high-tech multichannel, large surface proportional α and β, as well as 4 optional plastic scintillation γ detectors that also cover a large area.

Corapi - Model C3 Type - Gamma Pedestrian Portal Monitor

The CORAPI portal can detect traces of contamination in any person leaving an access-controlled area or site within a nuclear facility. CORAPI uses 4 plastic scintillation γ detectors that cover a large area. It is designed for a quick and reliable control, with a very low activity detection minimum threshold. The measurement time is automatically adjusted regarding the desired performance and the background. Gamma performance, regardless ot the...

Access control/Clearance DIRAD Advanced Spectroscopic Portal Monitor

Access control/Clearance DIRAD Advanced Spectroscopic Portal Monitor. The radiation detection system DIRAD is an automatic gamma spectroscopic monitor, to detect and identify illegal shipments of radioactive materials on public roads or pathways. The DIRAD beacon can continuously monitor a flow of people, vehicles and goods without limiting their movement. The DIRAD beacon is equipped with an optional GPS for localization and dating of each event. It...

Saphymo - Model SHFM Type - Mobile Controller System

The SHFM-type mobile controller has been developped for α, β and γ hand-and-foot contamination detection, with large surface scintillation detectors. The SHFM controller is generally installed at the exit of controlled areas of nuclear facilities or nuclear medicine services in hospitals. Its operation requires nothing but a mains supply, and its commisioning is very simple. Depending on the version, a removable hand detector can be...

Saphymo - Model RCP - Radiological Control for Pedestrian

This Radiation Portal Monitor allows the dynamic or static measurements of pedestians walking in front of the detector(s). It operates upon an automatic and dynamic control of people. With high-sensitivity gamma and/or neutron detectors, our system warns your operating agent only in case of alarm or failure.

Saphymo - Model RCCL - Container Radiation Portal Monitor

Our Radiation Portal Monitor for containers has been developped for the detection of potential radioactive sources in health care activity waste. Our system operates automatically and the bins don't need to be stopped (dynamic control). Its simplicity of use does not require any external intervention. With its very high-sensitivity plastic scintillation detectors, our system warns your operating agent only in case of alarm or failure.

Model RCVL - Vehicle Portal Monitor

Radiation Portal Monitor - Radiological Control of Vehicle Load. Our RCVL Radiation  Portal Monitor has been specially developped for the detection of potential radiactive sources in the loads of vehicles entering or leaving your site. Our Radiation Portal Monitor operates automatically and the vehicles don't need to be stopped (dynamic control). Its simplicity of use does not require any external intervention. With its very high-sensitivity...

Radiation Monitoring Systems

Designed to monitor radiation inside facilities.

Saphymo - Model GAM200 - Low Range Gamma Area Monitor

The GAM200 Gamma Monitor is used for continuous measurement of gamma dose rate in any indoor facility. The monitor displays the dose rate and triggers alarms whenever preset threshold levels are exceeded. It consists in an IC400 ion chamber combined to a MDU/IC processing unit. The GAM200 is part of the SYSRAY RMS system.

Saphymo - Model GAM210 - Low Range Gamma Area Monitor

The GAM210 Gamma Monitor is used for continuous measurement of gamma dose rate in any indoor facility. The GAM210 monitor is compact. It consists in modular components mounted directly on the wall using a dedicated support. It requires little maintenance.  The monitor includes an  IG5 – A20 pressurized ionization chamber.

Saphymo - Model GAM300 - Middle Range Gamma Area Monitor

The GAM300 Gamma Monitor is used for continuous measurement of gamma dose rate in a room or a hot cell. The monitor displays the dose rate and triggers alarms whenever preset threshold levels are exceeded. It consists in a MX33 ion chamber combined to a MDU/IC processing unit. The GAM300 is part of the SYSRAY RMS system.

Saphymo - Model GAM500 - Gamma Area Monitor

The GAM500 Gamma Monitor is used for continuous measurement of gamma dose rate in a room. The monitor displays the dose rate and triggers alarms whenever preset threshold levels are exceeded. It consists in a GM probe combined to a MDU/GM processing unit.Different probes are available to meet the requested sensitivity. The GAM500 monitor accomodates up to 3 probes. The GAM500 is part of the SYSRAY RMS system.

Saphymo - Model GM200 - In-Line Noble Gas Monitor

The GM200 Noble Gas Monitor is used for continuous measurement of Noble gas volumetric activity contained in gaseous effluents. This monitor is designed to complete all monitoring systems in nuclear facilities (reprocessing plants, nuclear power stations, accelerators, laboratories…), where continuous monitoring of the volumetric activity in gaseous effluents is required.

Saphymo - Model GM400 - Monitoring of Medium and High Level Noble Gas Activity

The GM400 Noble Gas Monitor is used for continuous measurement of medium and high range Noble gas volumetric activity contained in gaseous effluents. This monitor is designed to complete all monitoring systems in nuclear facilities (reprocessing plants, nuclear power stations, accelerators, laboratories…), where continuous monitoring of the volumetric activity in gaseous effluents is required.

Saphymo - Model GM700 - On-Line Noble Gas Monitor

The noble gas Monitor GM700 is used for continuous monitoring of gaseous effluents volumetric activity inside pipes by means of a non intrusive device. It performs on request spectrum analysis to track specific isotopes. Specific lead shielding is defined on request according to environmental γ background interference.

Saphymo - Model PM100 - Particulate Monitor

The PM100 particulate monitor is used for continuous measurement of α and β particulate volumetric activity in all gaseous effluents. The sample is pulled by means of a pumping unit from the flow of an exhaust stack, a ventilation duct or the static atmosphere of a working zone and then transferred to a detection assembly. A dynamic compensation of the contribution of Radon natural daughters and a dynamic compensation of environmental...

Saphymo - Model LM100S - In-Line Liquid Volumetric Activity Monitoring

The Liquid Monitor LM100S is used for continuous monitoring of liquid effluents volumetric activity. This monitor is designed to complete all monitoring systems in nuclear facilities (reprocessing plants, nuclear power plants, accelerators, research laboratories…), where continuous monitoring of liquid effluents volumetric activity is required.It is generally used for low volumetric activity monitoring under normal operating conditions. The...

Model LM320 - Liquid Monitor

Gamma dose rate monitoring of a well. This monitor is designed to complete all monitoring systems in nuclear facilities (reprocessing plants, nuclear power plants, accelerators, research laboratories…), where continuous gamma dose rate monitoring of a well is required. The monitor displays the gamma dose rate and triggers alarms whenever preset threshold levels are exceeded. The LM320 is part of the SYSRAY RMS system.

Model PAIS200 - Particulate and Iodine Sampler

The PAIS 200 is designed to continuously collect Particulates  and Iodines contained in all gaseous effluents. A sample is extracted either in a static atmosphere of a work area, either in a flow of a stack  or a ventilation duct by means of an isokinetic sampling probe. The samples are to be analyzed  in the laboratory.

Saphymo - Model BAB-A7 - Mobile Aerosol Beacon

The BAB-A7 mobile aerosol beacon is used in nuclear facilities for a continuous control of atmospheric air contamination by dust exposed to natural Radon and Thoron radioactivity and ambient gamma radiation. It is specially designed for work station monitoring during maintenance operations or in dismantling work sites, where man-made noise immunity is highly recommended.

ALMO - Background Monitor

The ALMO is a stationary device designed for ambient x and γ dose rate measurement and monitoring. It is user-friendly and easy to use. It includes a central unit that can be connected to up to 6 deported probes and that constantly displays the measured values. It can be specifically used for ambient dose rate monitoring in hospitals (nuclear medicine service), laboratories, nuclear facilities (storing shed, glove box).

Saphymo - Model IF104 - Dose Rate Meter

IF 104, with external probes, is a handheld device designed for X and γ dose rate measurement. It can display probe's measurement result. IF 104 can be connected to a management software or a supervision software.

Saphymo - Model SHF SHI SEC for IF 104 - X and Gamma Probes

IF 104 monitor can be connected to different types of probes that measure X and gamma dose rate, depending on the desired measurement range. SHF, SHI and ESC probes are waterproof and high dose rate probes.

Specific Applications

Densimeters, activimeters and simulators.

Saphymo - Model SCR800 - Radioactive Contamination Simulators

CR 800-type radioactive contamination simulators are training tools without radioactive source, used for real-conditions training, without any risk of contamination. They are intended for: learning contamination and decontamination measurement techniques, highlighting the risk of contamination transfer, evaluating the knowledge and the efficiency of the operators, validating emergency procedures, contamination meter use training.

Saphymo - Model 6150 - Gamma Irradiation Simulator

The 6150-type gamma irradiation simulator is a training tool without radioactive source, used for real-conditions training, without any risk of contamination. It is intended for: learning radioactive source research methods, highlighting the law in 1/d2, demonstrating the shield effect, validating the emergency procedures, evaluating the knowledge and the efficiency of the operators, training to radiation meter and electronic dosimeter use.

ISOMED - Model 2010 - Activity Meter

The ISOMED 2010 activity meter is a device intended for an accurate measurement of activity administered to the patients for diagnostic and therapeutic applications. Close attention is taken to meet the Quality Control standards required by Health Authorities. The various proposed well ionization chambers allow the use of the ISOMED 2010 in the F18 production centers, in the production shielded cells as well as for the final Quality Control.

59 Products found
Environmental XPRT is part of XPRT Media All Rights Reserved
Subscribe