54 Products found


Air Sampling Equipment – Pumps

GilAir - Model Plus - Personal Air Sampling Pump (1 - 5,000 cc/min)

Innovation Delivered: The ultimate personal air sampling pump delivering enhanced performance, greater versatility, and superior design and comfort.

Gilian - Model 3500 - 3.5LPM, 5000 - 5LPM - Air Sampling Pumps

The Gilian® 3500 & 5000 are industry leaders in back-pressure performance, reliability and ease-of-use. These pumps offer flow rates up to 3500 & 5000 cc/min respectively. And thanks to several advanced features, these pumps overcome the main causes of sampling errors – saving you time and money. The air flow display holds calibration for 30 days, even with atmospheric changes. While Gilian air sampling pumps are known for their...

GilAir - Model 3, 5 - Air Sampling Pumps

The GilAir pumps (GilAir-3 & GilAir-5) have one of the largest user bases of any air sampling pump worldwide. These reliable 3 and 5 liter per minute air sampling pumps have automatic constant flow assuring sampling is maintained within +/- 5% of the initial set point. Setting the flow rate on the GilAir-3 & GilAir-5 is a simple process that requires no special adjustment tool so you spend less time configuring...

Gilian - Model LFS-113 - Low Flow Personal Air Sampling Pump (1 - 350 cc/min)

The LFS-113 is a compact low flow air sampling pump. Designed for flow rates between 1 cc/min and 350 cc/min, the LFS-113 is perfect for very low flow applications sampling with sorbent tubes. Compact size and light weight of this pump allow it to easily fit inside a shirt pocket.

Gilian - Model BDX-II - Personal Air Sampling Pump (500 - 3,000 cc/min)

The Gilian BDX-II is an economical air sampling pump designed specifically for abatement and lead applications. It is a compact and rugged air sampling pump optimized for sample methods between 500 cc/min and 3000 cc/min. The BDX-II is powered by a rechargeable NiCd battery that provides up to 10 hours of operation on a single charge.

AirCon - Model 2 - Air Sampling Pump for Area Sampling Applications

A powerful 2-30 LPM constant flow sampler offering full portability and programmability

Air Sampling Equipment – Calibrators

Gilian - Model Gilibrator-2 - Air Flow Calibrator

The Gilibrator-2 System provides users with a convenient and highly automated way to check almost any commercially available air sampling pump for proper air flow function before deployment. The system consists of an electronic Gilibrator-2 Base which is used with any of three sizes of wet bubble cells. These patented interchangeable components are also available as part of kits which can also include a complete calibration diagnostic panel. All...

Gilian Challenger - Air Flow Calibrator

Precise air flow calibration from 1-30 LPM Wide temperature range of -30° to +55° C Displays both actual and standard flow rates Simple operation with no moving parts Truly portable, battery powered calibrator.

Gas Detector Tubes

Precision Gas Detector Tube Pumps

The Sensidyne AP-20S Gas Detection Pump Kit when used in conjunction with Sensidyne detector tubes is a portable gas detection system that is lightweight, rugged, and capable of on-the-spot detection of numerous gases and vapors. The Sensidyne detector tube pump is the first detector tube pump with an antibacterial Blue grip. The pump withstands harsh environments and is comes with a lifetime warranty.

Sensidyne - Colorimetric Gas Detection Tubes

Sensidyne supplies health & safety professionals with easy to use, on-the-spot measurements of many gases and vapors at a very low-cost per test. Our Detector tubes are shatter-proof for your protection and available for hundreds of gases and substances.

Sensidyne - Nephelometer – Aerosol Monitor

Real-time Dust Monitor for Measuring Total Suspended Particulate (TSP)

Sound and Vibration Instruments

Svantek - Model SV-104-Noise-Dosimeter - Personal Noise Dosimeter

Until the introduction of the SV 104 Personal Noise Dosimeter, noise dosimeters only did half the job of protecting workers from noise dose exposures. Traditional noise dosimeters only determined the dose exposure level and could not provide hearing protection data found in octave band analysis. The SV 104 Personal Noise Dosimeter is the only personal noise dosimeter with octave band analysis that provides accurate data necessary to select the most...

SV - Model 102 - Single or Dual Channel Noise Dosimter

Noise Dosimeter for Workplace Safety, Occupational Health and Industry. SV 102 dual-channel instrument presents completely new approach to occupational health and safety acoustic monitoring task. The binaural dose measurement and 1/1 octave analysis are simultaneously performed. Octave analysis providing direct data for ear-protectors designing together with Audio Events Recording function show new reference standard available in compact size...

SVAN - Model 953 - Low Cost Type 2 Sound Level Meter

SVAN 953 is all digital, Type 2 sound level meter along with analyzer.

SVAN - Model 955 - Low Cost Type 1 Sound Level Meter

SVAN 955 is all digital, Type 1 sound level meter. Instrument is intended to general acoustic measurements, environmental noise monitoring, occupational health and safety monitoring.

SVAN - Model 957 - Analyzer and Sound Level Meter

SVAN 957 is all digital, Type 1 sound & vibration level meter along with analyser. Instrument is intended to general acoustic and vibration measurements, environmental monitoring, occupational health and safety monitoring. SVAN 957 is recommended for those who are looking for the Type 1 instrument for both sound and vibration measurements.

SVAN - Model 979 - Advanced and Powerful Sound Level Meter and Analyzer

SVAN 979 is a powerful and advanced real-time sound and vibration analyzer for use in acoustical engineering, high-priority monitoring, and safety applications. The SVAN 979 has features and sensitivity commonly found precision laboratory equipment but in a portable sound and vibration meter and analyzer.

SV - Model 25S - MIRE (Microphone in Real Ear)

Assess Noise Sources Near to a Human Ear. Microphone In Real Ear (MIRE) is a technique for assessing the noise sources placed in a short distance to a human ear, requiring dedicated measuring instrumentation. SV 25S microphone has been designed together with SV 102 dual-channel acoustic dosimeter to meet requirements of ISO 11904 and ANSI S12.42-1995 standards which specify methods for the determination of sound emissions from sources located close to...

SV - Model 106 - Advanced 6-Channel Meter

Revolutionary Six-Channel Human Vibration Meter & Analyzer. SV 106 is a new six-channel human vibration meter and analyzer. Instrument meets ISO 8041:2005 standard and it is an ideal choice for measurements according to ISO 2631-1,2&5 and ISO 5349. This revolutionary, pocket-size instrument enables simultaneous measurements with two triaxial accelerometers (e.g. both-hands vibration or triaxial seat transmission measurements are possible).

Coal Dust Explosibility Meter (CDEM)

Measures percent rock dust in coal mine dust samples, Portable direct-reading instrument, Instantaneous explosibility indication, Easy-to-read digital display, MSHA approved (18-A 110002-0)

Fixed Gas Detection

SensAlert - Model Plus - Point Gas Detector

Universal Point Gas Detector Accepting Combustible (Infrared or Catalytic), Toxic, and Oxygen Gas Sensors.

SensAlarm - Model Plus - Point Gas Detection System

Universal Point Gas Detection System Accepting Combustible (Infrared or Catalytic), Toxic, and Oxygen Gas Sensors.

SensAlert - Point Gas Detector

4-20 mA & RS-485 Modbus Gas Detection Transmitters

SensAlarm - Point Gas Detection System

SensAlarm, like SensAlarm Plus is an easy-to-install, reliable single point monitoring system. SensAlarm accepts SensAlert electrochemical and catalytic bead sensors.

SensComm - Gas Detection Transmitter and Sensors

Commercial and Light Infrastructure Gas Detectors

Sensitron - Multiscan HD 256 Channel Gas Detection Controller

Gas detection controller for commercial and light infrastructure applications.

Sensitron - Multiscan MD 32-Channel Gas Detection Controller

Gas detection controller for commercial and light infrastructure applications.

Sensitron - Multiscan LD 8-Channel Gas Detection Controller

Gas detection controller for commercial and light infrastructure applications.

SafEye - Model 700 Series - Open Path Combustible Gas Detector

Industry-proven open path gas detection for line of sight applications.

SafEye - Model 200 Series - Open Path Combustible Gas Detector

Industry-proven open path gas detection for line of sight applications.

SafEye - Model 400 Series - Open Path Toxic Gas Detector

Industry-proven toxic open path gas detection for line of sight applications.

Model FS-24X - Flame Detector

QuadBand™ Triple IR Fire & Flame Detector - Triple IR + Visible Bands

Model FS-18X - Flame Detector

Multi-Spectrum TriBand™ Fire & Flame Detector - Dual IR + Visible Bands The FS18X is an advanced technology TriBand™ (IR/IR/Visible) Electro-Optical Flame Detector. High-speed solid-state Quantum sensors deliver fast reliable fire detection for all types of fires with the highest false event immunity. Patented software algorithms and multiple microprocessors provide detection of hydrocarbon and non-hydrocarbon fires, in all...

Model SS-4 - Flame Detector

Multi-Spectrum Fire and Flame Detector - UV + IR + Visible Bands

SensAlert ASI SIL-2 Certified Point Gas Detector - Model Third Party Certified SIL-2 - New Point Gas Monitor for Detection of Combustible and Toxic Gases in Critical Safety Applications

SensAlert ASI - Advanced Safety Integrity – The best solution for gas detection in critical safety applications. SensAlert ASI provides enhanced protection and dependability for critical safety applications where personnel, processes, and facilities are at risk. The third-party certified SIL-2 SensAlert ASI offers dependability and versatility while remaining the easiest to install, commission, operate, and maintain. Discover SensAlert ASI at:...

Micro Air Pumps

Vacuum or Pressure AAA Series Micro Diaphragm Air Pump (235-1410 cc/min)

Occupying less than 1.0 cubic inches of total volume, the 'AAA' series micro air pump is the ideal choice for original equipment manufacturers that require a pump of minimal size and weight.

Vacuum or Pressure AA Series Micro Diaphragm Air Pump (850-2660 cc/min)

These micro air pumps are engineered to provide the performance of a larger pump while maintaining a miniature size. Applications for these pumps include blood pressure monitoring, medicine delivery systems and air monitoring devices.

Vacuum or Pressure A Series Micro Diaphragm Air Pump (1500-3300 cc/min)

Originally designed for low flow air samplers, these micro air pumps can also be used in other applications, including blood pressure monitors and gas analyzers.

Vacuum or Pressure A Plus Series Micro Diaphragm Air Pump (up to 3.6 LPM)

Sensidyne A Plus micro air pumps are available in many standard configurations to meet the requirements of most applications. In addition, our Engineers can customize a pump to provide a pump solution which is specific to your needs.

Vacuum or Pressure B Plus Series Micro Diaphragm Air Pump (6.1-7.8 LPM)

The 'BP' series micro air pumps are ideal for applications which require higher flows at a very economical price.

Vacuum or Pressure C Series Micro Diaphragm Air Pump (10.2-13.3 LPM)

The 'C' series micro air pumps are a higher capacity version of the 'B' series pumps, offering a larger displacement and more powerful motor. These pumps are best suited for larger instruments such as medical equipment and demanding start-under-load applications.

Vacuum or Pressure C Series Dual Head Micro Diaphragm Air Pump (11.3-19.0 LPM)

The highly efficient 'Dual Head C' series micro air pumps can be used in series or parallel. This lightweight package can out perform comparable competitor pumps.


Sound Level Meters

Vibration Level Meters

Human Vibration


Noise Dosimeters

Vibration Dosimeters


SVAN - Model 971 - Sound Level Meter

SVAN 971 Class 1 Sound Level Meter is an extremely small instrument with options for 1/1 & 1/3 octave analysis. The instrument brings unprecedented state of the art technology to a SLM of this size.The user interface makes both configuration and measurement easier than ever before. For those who don't have time to work with measurement settings, SVAN 971 offers extremely simple operational mode with Start/Stop. This innovation makes the SVAN 971...

SVAN - Model 979 - Sound & Vibration Analyzer

The SVAN 979 Class 1 Sound & Vibration Analyzer is our flagship device. Your first impression will be the amazing OLED display which features excellent visibility in all light conditions. The instrument’s lightweight and durable aluminium housing not only gives a sense of a firm grip but also protects the valuable electronic device from damage and any influence from electromagnetic interference.

SVAN - Model 977 - Sound & Vibration Level Meter

SVAN 977 Class 1 Sound & Vibration Level Meter and analyser is designed to meet the needs of both environmental monitoring and occupational health and safety monitoring specialists. Its exceptional hardware design also enables the measurement of ultra sound frequencies in the 40 kHz band. The SVAN 977 provides broadband results with all the standard weighting filters and also offers an incredible time history logging capability providing broadband...

SVAN - Model 958A - Four-Channel Sound & Vibration Analyser

SVAN 958A Class 1 Four-channel Sound & Vibration Analyser is dedicated for all applications that require simultaneous class 1 sound and vibration assessment. Each of four input channels can be independently configured for sound or vibration detection with different filters and RMS detector time constants giving users an enormous measurement flexibility. The real advantage of SVAN 958A is the capability to perform advanced analysis simultaneously...

SVAN - Model 974 - Vibration Level Meter and Analyser

SVAN 974 Vibration Level Meter and Analyser is intended for general vibration measurements and machinery condition monitoring. It can be used by consultants, maintenance services, industry R&D departments etc. Instrument allows parallel acceleration, velocity and displacement measurements. Three vibration profiles allow parallel measurements with independently defined filters and RMS detector time constants. Each profile provides a significant...

Model SV 106 - Six-Channel Human Vibration Meter and Analyser

SV 106 Six-channel Human Vibration Meter and Analyser meets requirements of ISO 8041:2005 standard and it is an ideal choice for measurements according to ISO 2631-1,2&5, ISO 5349 and directive 2002/44/EC of European Parliament. This revolutionary, pocket-size instrument enables simultaneous measurements with two triaxial accelerometers (e.g. both-hands vibration or triaxial SEAT transmission measurements are possible).

Model SV 100A - Wireless Whole-Body Vibration Exposure Meter

The new SV 100A is a wireless whole-body vibration exposure meter suitable for whole-body measurements in accordance with ISO 2631-1. Suitable for taking measurements both on the seat and seat-back, the device uses the very latest technology and is ease of use. The instrument is equipped with 4 push buttons and a small OLED display that allows basic configuration in the field.  The Bluetooth interface enables current results to be previewed on a...

Model SV 111 - Vibration Calibrator

SV 111 Vibration Calibrator is the State of the Art instrument designed for in-situ checks according to ISO 8041. In-situ checks are intended for application in the field prior to and following a measurement or series of measurements. They act as a check of the instrument’s basic calibration and functionality.

Model SV 104 - Noise Dosimeter

SV 104 Noise Dosimeter brings incredible functionality into a compact style instrument. The SV 104 instrument is a revolutionary new approach to occupational health and safety noise monitoring offering voice comments and audio events recording functions which are a new concept in an instrument of this size. The measurement data is safely stored in the large 8 GB memory and the amazing OLED screen displays information in both text and graphical...

Model SV 104IS - Noise Dosimeter

The SV 104IS is the intrinsically safe version of the revolutionary personal noise dosimeter, the SV 104. Both instruments offer a new approach to occupational health and safety noise monitoring presenting features such as 1/1 octave band real-time analysis and audio events recording functions which are a new quality in an instrument of this size. All results are clearly displayed on the amazing OLED screen which offers excellent visibility even in...

Model SV 103 - Human Vibration Exposure Meter

SV 103 Personal Human Vibration Exposure meter is dedicated to hand-arm vibration measurements. The instrument meets ISO 8041:2005 and is the ideal choice for making measurements according to ISO 5349 and European Directive 2002/44/EC.

Model SV 150 - Tri-Axial Acceleromete

SV 150 is a tri-axial accelerometer designed to be used with the SV 106 human vibration analyser to provide a dedicated instrument for measurements according to ISO 5349-2. The accelerometer can easily be attached to the handle of the vibrating tool being measured. The sensor's TEDS memory stores information about calibration factor limiting the risk of configuration errors. The accelerometer is supplied with three different diameter fixing...

54 Products found
Environmental XPRT is part of XPRT Media All Rights Reserved