PRODUCTS

193 Products found

Conservation Vents – Pressure Vacuum Vents

Shand & Jurs - Model 94020 - Conservation Vent (Pressure/Vacuum)

The Shand & Jurs Model 94020 Conservation Vent is designed utilizing over 90 years of experience in producing high quality and dependable conservation fittings. Continued design improvements provide these vents with high efficiency, maximum flow capacity, and minimum leakage. The easily serviceable configuration and light weight construction reduces maintenance and installation costs.

Shand & Jurs - Model 94050 - Polyvinyl Chloride Conservation Vent

The Shand & Jurs PVC Conservation Vents are designed for highly corrosive service where toxic liquids are stored. They are an excellent alternative to coated metal construction, where frequent corrosion due to the presence of pinholes is a problem. PVC valves are intended to provide pressure and/or vacuum relief on atmospheric storage tanks requiring normal venting.

Shand & Jurs - Model 94040 - Spring Loaded Conservation Vent (Pressure/Vacuum)

The Shand & Jurs Model 94040 Spring Loaded Conservation Vent is designed utilizing over 90 years of experience in producing high quality and dependable conservation valves and safety fittings. This valve meets the need of higher pressure settings required on storage tanks (ideally suited when blanketed with nitrogen or other inert gas), process vessels and piping common to the petroleum, chemical and petro-chemical industries.

Shand & Jurs - Model 94060 - FRP Conservation Vent (Pressure/Vacuum)

The Shand & Jurs model 94060 Conservation Vent is constructed of Fiberglass Reinforced Plastic (FRP). It has been designed for superior corrosion resistance in oxidizing environments. The 94060 is ideally suited for a variety of tank storage and product conservation applications. It is applicable for the chemical, petroleum, petrochemical and waste treatment industries. This conservation valve can be utilized at the end of the line allowing...

Combustion Controls

GPE - Model 13110 - Hydraulic Controller

The Model 13110 Proportional-Speed Floating Hydraulic Controller is designed for applications where a group of controllers are supplied from a separate, but common power supply. The controller has a practical output range of approximately 235 to 45,000 pounds of force at the actuator. Model 13110 accepts pressure, differential pressure or electric signals.

GPE - Model 13141 - Integral Hydraulic Controller

Integral Power Supply, Pressures up to 930 psi, 5.8 to 14.1 GPM, 3 to 7.5 Horsepower, 35 Gallon Reservoir, Proportional Control, Pneumatic or Electronic Inputs, Manual or Automatic Switching.

GPE - Model 13190-13590 - Proportional-Speed Floating Control

Integral Motor / Pump, Low Inertia / Torque Ratio, Same options as 13x10 Models, Simplicity of Design, High Speed Response.

GPE - Model 13310 - Proportional-Speed Floating / Span Adjustment

Proportional Control, Pressure, DP, or Electronic Input, Uses Common Power Supply, Spindle Set Point Adjusters, 235 to 45,000 lbs. Forc.

GPE - Model 13120 - Hydraulic Controller

The Model 13120 Hydraulic Controller (servo valve) is specifically designed for any control system applications that require high performance hydraulic control or continuous servo valve actuation. The Dynaguide* Hydraulic Controller accepts electrical or pneumatic signal inputs from primary sensors. This signal is converted into a powerful hydraulic signal, through the use of an integrally mounted moving coil or diaphragm assembly and a jet pipe...

GPE - Model 13181 - Integral Hydraulic Controller

Integral Power Supply, Pressures up to 1000 psi, 10 to 40 GPM, 10 to 25 Horsepower, 100 Gallon Reservoir, Proportional Control, Pneumatic or Electronic Inputs, Manual or Automatic Switching.

GPE - Model 13210 - Hydraulic Controller

The Model 13210 Proportlonal-Plus-Reset Hydraulic Controller Is designed for slow-reacting control applications that require stability. A group of controllers are supplied from a separate, but common power supply. The controller has a practical output range of approximately 235 to 45,000 pounds of force at the actuator. Model 13210 accepts pressure or differential pressure.

GPE - Model 13410 - Proportional Plus Reset Control

Proportional Adjustable Ration Control, Pressure, DP, or Electronic Input, Uses Common Power Supply, Spindle, Slide, Bell Crank, or Geared Wheel Ration Adjusters, 235 to 45,000 lbs. of Force

GPE - Model 19111 - Hydraulic Power Supply

The Model 19111 is a complete Hydraulic Pump Unit consisting of pump, motor, 30 gallon reservoir and necessary accessories. Designed primarily for hydraulic controller application, it can be used wherever hydraulic power is required.

GPE - Model 19140/13120 - Hydraulic Power Supply and Controller

Ten Gallon Reservoir Eliminates the Need for Heat Exchanger, Pressure, Filter, and Level / Temperature Switches, Meets JIC Standards, 3.7 GPM, 100 to 300 PSI.

GPE - Model 19140 - Hydraulic Power Supply

Five Gallon Reservoir, 125 to 230 PSI, Mounting for Two Controllers, External Pump for Easy Maintenance, 1/2 Horsepower Pump, Meets JIC Standards, 0.8 to 4.0 GPM.

GPE - Model 19150 - Hydraulic Power Supply

Meets JIC Standards, 5 to 15 Horsepower, 500 to 900 PSI, 60 Gallon Reservoir, 10 to 20 GPM.

GPE - Model 14110 - Straight Type Cylinder

Single End, Low By-Pass Leakage, 1 1/2' - 8' Bore, Bronze Bearings, Up to 1500 lbs, Chrome Plated Cylinder Rod, Foot, Flange, or Pivot Mounting.

GPE - Model 14130 - Crank Type Cylinder

Model 14130 Crank Type Cylinders accept hydraulic oil to produce a rotary motion 90 degrees maximum. The models consist of a linear motion cylinder and a linkage which connects to a rotary motion.

GPE - Model 14120 - Hydraulic Power Supply

Double End Low By-Pass Leakage 1 1/2' - 8' Bore Bronze Bearings Up to 1500 lbs Chrome Plated Cylinder Rod Foot, Flange, or Pivot Mounting.

GPE - Model 14140 - Crank Type Cylinder

Model 14140 Crank Type Cylinders accept hydraulic oil to produce a rotary motion (90 degrees maximum). The models consist of a linear motion cylinder and a linkage which connects to a rotary motion.

GPE - Model 31490 - Rotary Position Transmitter

The Model 31490 Rotary Position Transmitter is a potentiometer type transmitter which transmits field information to a remote point.

GPE - Model 31590 - Linear Position Transmitter

GPE Controls Model 31590 Position Transmitter is a heavy-duty assembly packaged for industrial on-line applications.

Conservation Vents – Pressure Vents

Shand & Jurs - Model 94126 - Pressure Vent

The Shand & Jurs Model 94126 Pressure Vent is designed to relieve pressure on low pressure storage tanks, and is ideally suited as a low cost rim vent on floating roof tanks. Also, it is suitable as an auxiliary pressure or emergency vent on small low pressure tanks. The Model 94126 is available in a 6-inch size only, with screwed connection.

Shand & Jurs - Model 94130 - Pressure Relief Vent (Open or Closed Vent Option)

The Shand & Jurs Model 94130 Pressure Relief Vent is designed to provide pressure relief with high efficiency, maximum flow capacity and minimum leakage. The easily service able configuration and light weight construction reduces maintenance and installation costs. A variety of construction materials are available as part of the standard design which are ideally suited for highly corrosive and toxic product applications.

Shand & Jurs - Model 94140 - Spring Loaded Pressure Relief Vent (Spring Closed)

The Shand & Jurs Model 94140 Spring Loaded Pressure Relief Vent reduces excessive venting of product in liquid storage tanks. Available for open or closed vent systems, this vent provides pressure relief by either venting vapor into the atmosphere or piping emissions in a closed loop system.

Shand & Jurs - Model 94160 - Pressure Relief Vent

The Shand & Jurs Model 94160 Pressure Relief Vent provides pressure relief for storage tanks and low pressure vessels. Utilizing a flange mounted design, this economical vent provides maximum flow capacity and high efficiency.

Delavan Capacitance Probes

Delavan - Model Cap Analog 410 - R.F. Capacitance Level Transmitter

Delavan's Cap Analog 410 is a completely adjustable Integral R.F. Capacitance Transmitter. The 410 system provides a continuous 4-20mA analog signal proportional to the level. This versatile transmitter can be used in liquids, slurries and most powder bulk solid applications.

Delavan - Model Cap Analog 420 - R.F. Capacitance Remote Transmitter

Delavan's Cap Analog 420 is a completely adjustable remote R.F. Capacitance Transmitter. The 420 system provides a continuous analog signal plus up to two independently adjustable relays. This versatile transmitter can be used in liquids, slurries and most powder bulk solid applications.

Delavan - Model Versa-Cap 450/460 - R.F. Capacitance Level Transmitter

Versa-Cap is a versatile R.F. Capacitance Level Transmitter for liquids, slurries and bulk solid applications.

Delavan - Model Captrol 500-R - R.F. Capacitance Remote Point Level Switch

Delavan's Captrol 500-R is a cost effective Mount Microcontroller Based R.F. Capacitance On/Off Switch used in powder bulk solid and liquid applications.

Delavan - Model Captrol 511 - R.F. Capacitance Point Level Switch

Purpose: The Captrol 511 Point Level Switch is designed to be the ultimate in detecting the presence or absence of various materials from powder bulk solids to most liquids. The electronics are self contained in a cast aluminum housing pre-assembled to a rugged three element sensing probe.

Delavan - Model Captrol Cap Point 520 - R.F. Capacitance Liquid-Bulk Level

Function: Point level control of liquids or bulk solids High and low level control (single unit) Out of limits indicator, control

Delavan - Model Cap Analog 4100 - R.F. Capacitance Two-Wire Level Transmitter

Purpose: Delavan's Cap Analog 4100 is a cost effective 'Two- Wire' R.F. Capacitance Transmitter used in powder bulk solids, liquids and slurry applications.

Delavan - Model Cap Analog 421 - R.F. Capacitance Remote Transmitter w/LCD

Delavan's Cap Analog 420 is a completely adjustable remote R.F. Capacitance Transmitter. The 420 system provides a continuous analog signal plus up to two independently adjustable relays. This versatile transmitter can be used in liquids, slurries and most powder bulk solid applications.

Delavan - Model Captrol 500 - R.F. Capacitance On/Off Switch

Delavan's Captrol 500 is a cost effective Microcontroller Based R.F. Capacitance On/Off Switch used in powder bulk solid and liquid applications.

Delavan - Model Captrol 510 - R.F. Capacitance Adjustable Dual-Point Switch

Delavan's Captrol 510 is an Adjustable On/Off R.F. Capacitance Switch with up to 2 independently adjustable non-interacting set points. It may be used in powder bulk solids and liquid applications.

Delavan - Model Captrol 514 - R.F. Capacitance Multi-Point Level Switch

Function: Delavan's Captrol 514 is a superior integral mount Microcontroller Based R.F. Capacitance 'Multi-Point' Level Switch used in liquids and powder bulk solid applications.

Delavan - Model MicroPoint 800 - R.F. Capacitance Point Level Switch

Purpose: Delavan's MicroPoint 800 is a truly cost effective Microprocessor Based R.F. Capacitance On/Off Switch used in powder bulk solid and liquid applications.

Calibrators

L&J Engineering - Model MCG 2100 - Field Calibrator

The MCG 2100 is able to communicate with any of the L&J engineering Level Gauges. The calibrator is equipped with the ability to display the level reading, temperature reading and the discrete input status being sent back from the transmitter. This enables the operator to check the conditions of the field wiring and proper operation of the control room. In the troubleshooting mode, different types of faults are displayed on the LCD.

L&J Engineering - Model MCG 2150 - Remote Calibrator

With the MCG 2150 Remote Calibrator, setup, programming and calibration become a matter of 'remote control.' When used with any of the L&J gauging products (with Infrared Pickup), this compact intrinsically safe wireless unit allows the operator to access, view, and change programming data without ever removing the explosion proof housing. It is simply a matter of standing within ten (10) feet of the readout and pressing the entry keypad. This...

Omnitrol Chamber Mounted Level Switches

Omnitrol - Model 250 - Boiler Control Unit

The Omnitrol Liquid Level Control Model 250 is a chamber mounted unit designed for a variety of uses in boiler water level control applications. It utilizes a unique patented constantly engaged magnetic field concept which assures a positive switch in both the rise and fall of liquid levels without the introduction of springs or other mechanical devices. Unlike other Omnitrol units, the Model 250 utilizes a stainless steel internal float assembly...

Omnitrol - Model 664, 666 & 668 (F) - Single Actuator Flanged Chamber Mounted Switch

Models 664F, 666F and 668F are single actuated flanged chamber mounted switches. Each control is available with a wide variety of switches.

Omnitrols - Model 764, 766, & 768 (F) - Dual Actuator Flanged Chamber Mounted Switch

Models 764F, 766F and 768F are double actuator flanged chamber mounted units. Switching differentials for standard specific gravity settings are shown in Table A on reverse side. Maximum specific gravity for these controls is 1.4

Omnitrols - Model 666 / 668 (C) - Single Actuator Chamber Mounted Switch

Models 666C and 668C are single actuator controls. They are short welded chambers with excellent low specific gravity and high pressure capabilities. Each control is available with a wide variety of switches. The controls use a short welded chamber which totally encloses the solid graphite displacer. Connections are 1' NPT.

Omnitrol - Model 764, 766, & 768 (W) - Dual Actuator Welded Chamber Mounted Switches

Models 764W, 766W and 768W are double actuator controls. Each control is available with a wide variety of switches. These units are long welded chambers with nominal body diameters of 4' to 8'. The long welded steel chamber totally encloses the solid graphite displacer (S.S. Displacer Option). Process connections are 1' NPT (standard). Process connections are available in other sizes and configurations (Flanged). These units are sized to meet...

Automatic Tank Gauges

Shand & Jurs - Model 92021 - Automatic Tank Gauge

The Shand & Jurs Model 92021 Automatic Tank Level Gauge is a float actuated tape driven gauge and by means of a digital counter indicates float travel accurately to 1/16 inch. Model 92021 meets all the specifications and recommendations of the American Petroleum Institute in accordance with API Bulletin 2509B.

Shand & Jurs - Model 92051 - Marine Tank Level Gauge

Over the years Shand & Jurs has provided the marine industry with more float-type gauges than any other manufacturer. Level measurement instruments operating on bulk carriers, product carriers, crude carriers, chemical carriers, ore/bulk/oil carriers, and LNG carriers provide us with the expertise required for the safe handling of liquids for today's tankers.

Shand & Jurs - Model 92500 - Cover Position Indicator

The Shand & Jurs Model 92500 Retrofit Gauge is specifically designed to replace existing Varec Model 2500 Gauges and GSI 2500 Model in existing installations. The Shand & Jurs 92500 allows for improvement in accuracy while minimizing field labor to replace existing gauges.

Shand & Jurs - Model 93421 - Tape or Cable Block Valve

The Shand & Jurs Model 93421 Tape or Cable Block Valve is utilized in Automatic Level Gauging Systems to isolate the pressure source from the gauge head for inspection, and service of the gauging system without reducing tank pressure, or in installations where it is necessary to close a valve on a flat tape or cable. Should the action of product turbulence cause the tape to break, the cable block valve offers a cable catcher that stops the tape at...

Shand & Jurs - Model 92030 - Automatic Tank Gauge (High Pressure)

The Shand & Jurs Model 92030 Automatic Tank Level Gauge is a float actuated tape driven gauge. Through the use of digital counters float travel is accurately indicated to 1/16 of an inch over the entire tank range.

Shand & Jurs - Model 92302 - Liquid Level Indicator

The Shand & Jurs Model 92302 Liquid Level Indicator is a reliable float actuated level gauging system. It is designed to provide reliable and virtually trouble-free service for installation not requiring accuracies better than ±1 inch.

Shand & Jurs - Model 93376 - Semi Automatic Tank Gauge and Sampling Lock

The Shand & Jurs Model 93376 Semi-Automatic Tank Gauge and Sampling Lock has been designed as an intermediate step between hand gauging and fully automatic tank gauging. The inherent inaccuracy of hand gauges led to the design of this tank gauge, which entirely eliminates the human element in the sequence of lowering the tape and bob to the bottom of the tank in order to obtain an 'innage' reading.

Shand & Jurs - Model 93603 - Liquid Seal

The Shand & Jurs Model 93603 Liquid Seal is used with liquid level gauges to retain tank vapor space pressure and vacuum. It is also used as a barrier to protect the gauge head from corrosive tank vapors or other effects. The construction of the liquid seal features aluminum housings, galvanized iron pipe, Delrin tape pulleys that rotate on Teflon bearings and stainless steel shafts. The 93603 requires a relatively simple installation. The seal...

Conservation Vents – Free Vents

Shand & Jurs - Model 94240 - Free Vent

The Shand & Jurs Model 94240 Free Vents are designed for use on bulk liquid storage tanks containing non-volatile liquids.

Shand & Jurs - Model 94550 - Combination Flame Arrester and Free Vent

The Shand & Jurs Model 94550 Combination Flame Arrester/Free Vent provides both positive flame stop and maximum venting in a compact fitting.

Shand & Jurs - Model 94241 - Free Vent (Hooded)

The Shand & Jurs Model 94241 Free Vents are designed for use on bulk liquid storage tanks containing non-volatile liquids. The free vent is also used on vent riser pipes.

Conservation Vents – Vacuum Vents

Shand & Jurs - Model 94100 - Vacuum Vent (High Pressure)

The Shand & Jurs Model 94100 Vacuum Vent is designed utilizing over 90 years of experience in the development of quality safety and conservation fittings. The function of this vent is to relieve vacuum conditions in liquid product storage tanks, and also withstand the pressure of the stored product when not operating under a vacuum. This model is specifically designed to operate at pressure up to 125 psi and at temperature ranges from minus...

Shand & Jurs - Model 94110 - Vacuum Vent

The Shand & Jurs Model 94110 Vacuum Vent is designed using more than 90 years of experience in the development of quality safety and conservation fittings. The function of this vent is to relieve vacuum conditions in liquid product storage tanks, and also withstand the pressure of the stored product when not operating under a vacuum.

Shand & Jurs - Model 94116 - Snap Action Vacuum Breaker

The Shand & Jurs model 94116 Snap Action Vacuum Breaker permits high capacity atmospheric air flow at low differential pressures to be drawn into the liquid storage tank or pressure vessel when the internal vacuum pressure exceeds the vent setting.

Shand & Jurs - Model 94103 - Static Pressure Vacuum Vent

The Shand & Jurs Model 94103 Static Pressure Vacuum Vent design incorporates more than 90 years of experience in the development of quality safety and conservation fittings. This model is specifically designed to operate at static pressures up to 150psi and at temperature ranges from minus 50° to plus 200° Fahrenheit. Provisions for high vacuum settings are provided.

Shand & Jurs - Model 94115 - Vacuum Vent (Side Mounted)

The Shand & Jurs Model 94115 Vacuum Vent has been designed utilizing over 90 years experience in the development of quality safety and conservation fittings. The function of this vent is to relieve vacuum conditions in liquid product storage tanks, and also withstand the pressure of the stored product when not operating under a vacuum.

Shand & Jurs - Model 94530 - Snap Action Vacuum Vent

The Shand & Jurs Model 94530 Snap Action Vacuum Vent permits air flow into liquid storage tanks when the internal vacuum exceeds the vent setting.

Deflagration Arresters

Shand & Jurs - Model 94406 - Vertical Inline Deflagration Flame Arrester

The Shand & Jurs Model 94406 Vertical Inline Deflagration Flame Arresters are designed to provide a positive flame stop on low pressure tanks or piping systems containing flammable liquids or solvents having a low flash point. Model 94406 not only provides exceptional protection against flame from external ignition, but also offers maximum flow capacity.

Shand & Jurs - Model 94450 - Combination Deflagration Flame Arrester & Free Vent

The Shand & Jurs Model 94450 Combination Deflagration Flame Arrester and Free Vent provides both positive flame stop and maximum venting in a compact fitting. This Shand & Jurs fitting features an easily accessible, unitized tube bank. It's completely removable for quick inspection and servicing, even under severe conditions of unpredictable corrosion or neglect.

Shand & Jurs - Model 94407 - Horizontal Inline Deflagration Flame Arrester

The Shand & Jurs Model 94407 Horizontal Inline Deflagration Flame Arrester is designed to provide a positive flame stop in horizontal gas piping systems. Model 94407 offers maximum flow capacity and is specifically designed to prevent liquid accumulation in the tube bank assembly.

Shand & Jurs - Model 94470 - Combination Conservation Vent & Deflagration Flame Arrester

The Shand & Jurs Model 94470 Combination Conservation Vent and Deflagration Flame Arrester is a single, easy to configure package providing for pressure and vacuum relief, as well as positive flame stop on low pressure tanks containing flammable liquids or solvents having a low flash point.

Shand & Jurs Biogas Digester Cover Equipment

Shand & Jurs - Model 92021 - Automatic Tank Gauge

The Shand & Jurs Model 92021 Automatic Tank Level Gauge is a float actuated tape driven gauge and by means of a digital counter indicates float travel accurately to 1/16 inch. Model 92021 meets all the specifications and recommendations of the American Petroleum Institute in accordance with API Bulletin 2509B.

Shand & Jurs - Model 4-20mA - Level Transmitter

Shand & Jurs Biogas has once again revolutionized the Transmitter market with its latest edition of the 4-20mA Level Transmitter. The 4-20mA Level Transmitter uses L&J engineering's revolutionary new absolute magnetic encoding (patent pending) to provide the greatest accuracy ever offered in the history of transmitters with 1/32 of an inch standard and with 1/64 of an inch accuracy as an available option. The reliability of the 4-20mA...

Shand & Jurs - Model 94225 - Emergency Vent & Manhole Cover (Pressure and Vacuum)

The Shand & Jurs Model 94225 Emergency Vent and Manhole Cover provides emergency relief of excessive internal pressure and vacuum beyond that provided by tank conservation vent requirements.

Shand & Jurs - Model 95021 - Gauge Hatch

The Shand & Jurs Model 95021 Gauge Hatch is designed to provide easy access to storage tanks for gauging product level or temperature and product sampling.

Shand & Jurs - Model 95220 - Clamping Manhole Cover

The Shand & Jurs Model 95220 Clamping Manhole Cover is designed as an economical solution that provides ready access to product storage tanks by means of an easily opened-dome hinged cover.

Shand & Jurs - Model 97187 - View Port Inspection Cover

The Shand & Jurs Biogas Model 97187 View Port Inspection Cover is designed to provide a visual inspection of the inside of a tank or digester's contents while maintaining the gas-tight integrity of the system.

Shand & Jurs - Model 97570 - Combination Conservation Vent & Flame Arrester (2inch-12inch Sizes)

The Shand & Jurs Biogas Model 97570 Combination Conservation Vent and Flame Arrester is a single, easy to configure package providing for pressure and vacuum relief, as well as positive flame stop on low pressure tanks containing flammable liquids or solvents having a low flash point.

Shand & Jurs - Model 92500 - Cover Position Indicator

The Shand & Jurs Model 92500 Retrofit Gauge is specifically designed to replace existing Varec Model 2500 Gauges and GSI 2500 Model in existing installations. The Shand & Jurs 92500 allows for improvement in accuracy while minimizing field labor to replace existing gauges.

Shand & Jurs - Model 94210 - Emergency Vent & Manhole Cover (Hinged)

The Shand & Jurs Model 94210 Emergency Vent and Manhole Cover is an economical solution to emergency venting requirements where intermediate pressure settings are required.

Shand & Jurs - Model 94306 - Vertical Flame Arrester

The Shand & Jurs Flame Arresters are designed to provide a positive flame stop on low pressure tanks, storage tanks and anaerobic digesters containing flammable liquids, solvents or gases having a low flash point. The 94306 not only provides exceptional protection against fire from external ignition, but also offers maximum flow capacity.

Shand & Jurs - Model 94307 - Horizontal Flame Arrester

The Shand & Jurs 94307 Horizontal Flame Arrester is designed to orovide a positive flame stop in gas piping systems. The 94307 not only provides exceptional protection against propagation of fire, but also offers maximum flow capacity. It is specifically designed to prevent liquid accumulation in the tube bank assembly.

Shand & Jurs - Model 95210 - Clamping Manhole Cover

The Shand & Jurs Model 95210 Clamping Manhole Cover is designed as an economical solution that provides ready access to product storage tanks by means of an easily opened hinged cover.

Shand & Jurs - Model 97186 - View Port

The Shand & Jurs Model 97186 View Port is designed to provide the unhindered visual inspection of tank or digester contents while maintaining the gas-tight integrity of the system.

Shand & Jurs - Model 97190 - 3-Way Safety Selector Valve

The Shand & Jurs Biogas Model 97190 3-Way Selector Valve permits the safe and efficient maintenance of redundant pressure relief systems without any process interruptions.

Shand and Jurs - Model 97571 - Combination Conservation Vent & Flame Arrester

The Shand & Jurs Biogas 97571 Combination Conservation Vent and Flame Arrester is a single, easy-to-configure package providing for pressure and vacuum relief, as well as positive flame stop on low pressure tanks containing flammable liquids or solvents having a low flash point.

Shand & Jurs - Model 97100E - Electric Drip Trap

The Shand & Jurs Biogas 97100E Electric Drip Trap provides for the continuous, safe removal of condensate from low points in low pressure gas piping systems. Available in either 3 or 6 quart sizes and with 1' NPT inlets and outlets, the Shand & Jurs Biogas 97100E adapts to any condensation or drainage collection requirement. The 97100E can be mounted in Class 1, Division 1 & 2, Gas Group D rated areas.

Shand & Jurs - Model 97101E - High Pressure Drip Trap with Electric Actuator

The Shand & Jurs Biogas 97101E High Pressure Drip Trap with Electric Actuator provides for the automatic, continuous, safe removal of condensate from low points in high pressure gas piping systems. The S&J 97101E is available in 4 quart or 6 quart sizes and with 1' NPT inlets and outlets. It easily adapts to any condensation or drainage collection requirement. Removing condensed liquid protects the piping and equipment from corrosion and...

Detonation Arresters

Shand & Jurs - Model 94311, 94312, 94313, 94314 - Detonation Flame Arresters

The Shand & Jurs Detonation Flame Arresters provide protection against flame propagation through piping runs and vapor recovery systems, while allowing maximum flow efficiencies. This design quenches a flame front approaching from either direction, even if it has transitioned to a detonation. The Arresters contain a detonation while retaining the integrity of both the arresting element and the housing. This is ensured by the design of the passages...

Shand & Jurs Biogas Digester Gas Stream Equipment

Shand & Jurs - Model 97100 - Manual Drip Trap

The Shand & Jurs Biogas 97100 Manual Drip Trap provides for the continuous, safe removal of condensate from low points in low pressure gas piping systems. Removing condensed liquid protects the piping and equipment from corrosion and 'water hammer' damage.

Shand & Jurs - Model 97110 - Automatic Drip Trap

The Shand & Jurs Biogas 97110 Automatic Drip Trap provides for the continuous, safe removal of condensate from low points in low pressure gas piping systems. Removing condensed liquid protects the piping and equipment from corrosion and 'water hammer' damage.

Shand & Jurs - Model 97125 - Condensate Accumulator

The Shand & Jurs Biogas 97125 Condensate Accumulator is designed to permit the removal and storage of liquid condensation from biogas while maintaining system pressure integrity. Condensate is a typical byproduct that forms in the pipeline when the hot, saturated biogas cools as it moves through the piping system. The removal of condensate from the biogas is necessary to keep the gas train running by protecting the downstream equipment and piping...

193 Products found
Environmental XPRT is part of XPRT Media All Rights Reserved
Subscribe