Products and Equipment from Vermeer on Environmental Expert

Environmental Expert eBulletin Subscriptions Environmental Expert RSS Feeds Environmental Expert Facebook Environmental Expert Twitter Environmental Expert LinkedIn

Find us on

Vermeer

1210 Vermeer Road East
Pella , Iowa 50219 USA

PRODUCTS

Product / Service Lines:

105 Products found

1

2

Next »

Compost Turners

Turning the Industry Upside Down. For a decade, Vermeer has been providing equipment to the composting market with its extensive tub and horizontal grinder line. Now Vermeer offers compost turner equipment with the elevating face technology to complement our line of grinders - providing customers with a comprehensive line of compost equipment solutions.

CT1010TX - Compost Turner

If you want to maximize your compost operation’s space, choose the CT1010TX. Equipped with the optional conveyor, this self-propelled compost tuner lifts and fully aerates the material, then places it back in one continuous stack to save space. SmartTrack advanced control system monitors the elevating face, optional conveyor and ground drive, adjusting each as needed to help increase machine longevity and jobsite productivity. Reversible...

CT612 - Compost Turner

The CT612 converts to transport mode quickly for easy highway towing between job sites. Built with a heavy-duty frame, the CT612 features a large-diameter drum that aerates compost to help you work more efficiently and effectively. Features a 6’ x 12’ (1.8 m x 3.7 m) windrow that can handle up to 1500 tons/hr (1360.8 metric tons/hr).

CT670 - Compost Turner

Turn compost efficiently with the CT670. This pull-type compost turner uses the Vermeer patented elevated face technology to lift and tumble material up and turn it back over the windrow, fully aerated, so that it takes less time to complete the decomposition cycle. In just two passes, the CT670 can completely aerate a windrow of compost up to 12’/3.7 m wide and 6’/1.8 m high, processing up to 2,000 cu. yd/1,529 m3 per hour.

CT820 - Compost Turner

The professional-grade CT820 turns up to 6300 tons (5625 metric tons) of compost per hour. Rugged belt-drive operation and a heavy-duty frame give it the strength to get the job done, day after day. A state-of-the-art cab makes operation a pleasure and low-maintenance components reduce the need for repairs. Inside and out, the CT820 is built to last and equipped to take on anything.

CT514 - Compost Turner

Process up to 2,300 tons/2,086.5 metric tons per hour with the CT514 compost turner. Towed with a 60 hp tractor or front-end loaders, the CT514 creates windrows measuring 5’x14’/ 1.26 x 4/3 m with ease, thanks to a powerful John Deere 6068HF PowerTech Tier 3 engine. Aggressive flails promote aeration and mixing to reduce total composting time. Heavy-duty construction and added features like a hydraulic actuated clutch help extend clutch...

CT616 - Compost Turner

Process up to 3,000 tons/2,721.5 or 2,712.5 (conflicting info from web to handout) metric tons per hour with the CT616 compost turner. Powered by a John Deere RG6090HF PowerTech Tier 3 engine, the CT616 features aggressive flails that fully mix and completely aerate each windrow to reduce total composting time. Heavy-duty construction and added features like a hydraulic actuated clutch ensures years of service.

Horizontal Grinders

For land-clearing contractors, municipalities, urban construction teams and anyone else who has to deal with a lot of wood waste, Vermeer horizontal grinders are an industry leader. They’ll make short work of your wood waste, reducing it to a manageable size for transportation and turning it into useful mulch that can serve as a viable profit center for your operation.

HG8000 - Horizontal Grinder

Large-diameter wood and brushy debris are no match for the HG8000 horizontal grinder. No need to cut it down to size: this monster of a machine has the largest infeed opening in its class and the power of a 1050 hp/783.3 kw CAT Tier 2 engine. Dual planetary feed roller drives push material into the drum with outstanding efficiency. Extra-wide load-out conveyer lets you drop processed wood where you want it without slowing down the grinding action.

HG6000 - Horizontal Grinder

Process wood waste efficiently with the HG6000 horizontal grinder. Get started with the touch of a button to activate the microprocessor-controlled HPTO clutch. Fifth-wheel towing configuration provides mobility, and the open-ended, extra-wide feed table allows you to load wood waste over the side. State-of-the-art wireless remote lets you operate the machine from up to 300’/91 m away.

HG6000TX - Horizontal Grinder

Process wood waste more efficiently with the HG6000TX horizontal grinder. Self-propels into the most remote jobsites on 20”/51 cm or 24”/61 cm double grouser track pads. High ground clearance and sealed rollers help keep material from building up in the track system. State-of-the-art wireless remote lets you operate the machine from up to 300’/91.4 m away. An optional discharge blower system distributes processed wood over a large...

HG200 - Horizontal Grinder

Quickly turn tree slash, construction debris and green waste into profitable landscape mulch, animal bedding, ground cover or compost with the HG200 horizontal grinder. Its compact size makes it ideal for contractors who have a modest amount of wood waste to process, but it carries the same features as larger Vermeer grinders. Grinds wood to a uniform size with the power of an 85 hp/63 kW Cummins diesel engine.

HG365E - Horizontal Grinder

For high-volume wood waste processing, the Vermeer electric HG365E reduces organic waste using the same innovative and labor-saving features as other Vermeer grinders. Ideal for municipalities and green waste processors located in urban areas, the HG365E can be permanently installed indoors or out, working as a stand-alone unit or as one component in an entire waste reduction system. Hammermill and hydraulic functions are operated with different...

HG4000TX - Horizontal Grinder

Take the self-propelled HG4000TX horizontal grinder to tough jobsites. With its 20”/51 cm double grouser track pads, high ground clearance and sealed rollers, it can get into remote areas easily, without material building up in the track system. A fully enclosed engine helps reduce noise. Infeed over-pressure/auto-reverse function reduces jams. Extra-wide, 48”/122 cm V-cleat discharge conveyor neatly discharges processed material from the...

HG6000E - Electric Horizontal Grinder

For green waste processing facilities, the Vermeer electric HG6000E reduces organic waste. Install indoors or out, either as a stand-alone unit or as one component in an entire green waste reduction system. Available with either a skid mount or trailer to meet your jobsite requirements.

HG8000TX - Horizontal Grinder

The HG8000TX horizontal grinder from Vermeer boasts the largest infeed opening in its class, helping to increase your productivity and expand job possibilities. Powered by a 1050-hp (783 kW) CAT Tier 2 engine, this unit handles big diameter wood and large, brushy debris with ease. Plus, its innovative design incorporates several features to help reduce material spillage and jobsite cleanup time. The HG8000TX is equipped with a tracked undercarriage...

Vermeer - HG4000E - Horizontal Grinder

Get performance and on-site power with the stationary Vermeer HG4000E electric powered horizontal grinder. Ideal for municipalities and green waste processors located in urban areas, the HG4000E is adaptable to a wide range of electrical grid systems and configurable to a variety of on-site grinding applications. Additionally, the system can permanently be installed indoors or out as a stand-alone unit or component of an entire waste reduction...

Tub Grinders

Vermeer tub grinders are designed for high-volume land-clearing and wood recycling operations. Loaded with innovative features that help improve efficiency and safety, each Vermeer tub grinder includes the patented duplex drum cutting system, which offers optimum cutting performance and simplified maintenance.

TG5000 - Tub Grinder

The TG5000 is an ideal combination of innovation and power. Powered by one of two turbocharged CAT Tier 3 engine options, it features a hydraulic tub drive chain tensioner that automatically adjusts the chain while operating as well as the exclusive Vermeer duplex drum, which offers optimum cutting performance and simplified maintenance. Add on the PT tech wet clutch with microprocessor control to automatically limit torque when necessary. Optional...

TG7000 - Tub Grinder

The TG7000 packs innovation and power for large land clearing projects and organic/wood waste processing applications. It processes through wood waste quickly with the exclusive Vermeer duplex drum to minimize maintenance, a PT tech wet clutch with microprocessor to automatically limit torque when necessary, and a patented cutting system outfitted with 11 hammers and 22 double-bolt cutter blocks. Optional climate-controlled cab and grapple loader...

TG9000 - Tub Grinder

When you need more power for your high-production grinding operation, the TG9000 is an ideal choice. The TG9000’s PT tech wet clutch with 2:1 gear reduction is controlled by a microprocesser to help protect the engine by limiting torque when necessary. The TG9000 features the largest diameter opening in the industry with an inside tub diameter of 11'/3.4 m. The patented duplex drum offers optimum cutting performance and simplified maintenance.

Balers

404 - Pro Silage Baler

Loaded with state-of-the-art features, the Vermeer 404 Pro Silage Baler is designed for fast, efficient silage baling to save you time while preserving the quality of your crop. The optional XtraCut17 crop cutter system increases bale density, accelerates fermentation, and improves silage quality and digestibility. Meanwhile, the exclusive HYDROFLEX Control lets the floor shift up and down to accommodate uneven swaths, minimizing rotor blockage. Plus,...

5410 - Rebel Baler

The Vermeer 5410 Rebel® Baler is ideal for part-time farmers who need a fast, efficient baler that is simple to operate and easy on the budget. The Rebel has the useful features of the big balers, including electronic bale monitoring and solid construction, so you can put it to work on your operation for years to come. Add the optional Netwrap – this is the only baler with net in its class.

505M - Classic Baler

Vermeer Classic Balers combine the great, time-tested Vermeer design of the past with the new M baler features of the future. The Vermeer 505M Classic Round Baler makes putting up hay easy. The unique vertical belt-drum starting principle grabs the end of the windrow easily. Finished bales can be protected with the optional Netwrap attachment. Bales measuring up to 5'/1.5 m in diameter and 5'/1.5 m wide look great and protect the nutritional value of...

604 - Super M Baler

Bale hay and other forage crops with remarkable speed and reliability. The Vermeer 604 Super M baler has the features farmers need. Its direct crop feed is simple and compact for maximum efficiency. Other features like optional electronic bale monitoring with scales and moisture measurements, powered bale ramp and many more, make the 604 Super M a top seller.

605 - Super M Baler

Produce round bales in less time with less hassle when you use the 605 Super M Baler. Built for high-volume hay production, it offers the best in modern technology, including the exclusive Vermeer direct crop feed design, optional powered windguard, electronic bale monitoring, optional powered bale ramp and much more.

605 - Super M Cornstalk Special Baler

Produce more bales in a day with less looking back. Baling cornstalks is as easy as baling hay with the Vermeer 605 Super M Cornstalk Special Baler. Engineered specifically to gather bulky cornstalks and roll them into a tight bale, this workhorse carries the same technological advancements that have made Vermeer round balers top sellers in the industry: powered windguard, electronic bale monitoring, powered bale ramp and more.

665 - Rancher Baler

The Vermeer 665 Rancher Baler lets you get the job done, for less. With rugged construction and patented Vermeer M-Series baler technology, the 665 can produce high-density bales that can be moved with mid-sized tractors, loaders or skid steers. It’s right-priced and backed with our standard 1-year limited warranty for added peace of mind.

Brush Chippers

Built tough enough to withstand the daily grind, Vermeer brush chippers surpass expectations. Each is engineered with exclusive features that promote easy operation, high efficiency and operator safety. They’re also easy to maintain and transport, making them a great value for arborists, landscape contractors, logging firms, rental stores and anyone else who needs to get rid of slash and other wood waste with small to medium diameters.

BC2100XL - Brush Chipper

Engineered for high volume processing, the BC2100XL bullies through wood waste up to 21”/53.3 cm in diameter. The combination of the exclusive Vermeer SmartCrush feature and two patent-pending horizontal feed rollers produce a theoretical 10,000 lbs/4,536 kg of combined pulling force. Choose from one of three Cummins diesel engine options. Add on the optional winch to lift up to 4,000 lb/1,814 kg logs directly onto the feed table.

BC1500 - Tier 3 Brush Chipper

Powered by a 125 hp/93 kW John Deere tier 3 diesel engine, the BC1500 powers through material up to 15”/38 cm in diameter. Automatic throttle and clutch system prevent high-throttle clutch engagement to reduce frequent clutch plate adjustments. Extra-large 45-gallon/170 L fuel tank lets you put in more hours before refueling. The optional winch can help load larger logs directly onto the feed table.

BC1000XL - Brush Chipper

Looking for productivity and safety for your line-clearing and rental operations? The Vermeer BC1000XL provides the latest innovations, productivity, operator safety and power efficiency. Equipped with a 49 hp (36.5 kW) CAT 2.2L Tier 4a diesel engine or a 85 hp (63.38 kw) Cummins B3.3 Turbo Tier 3 engine, the BC1000XL delivers efficiency to chip through some of your toughest jobs, while the 25-gal (94.6 L) fuel tank cuts the time spent...

BC600XL - Brush Chipper

Don’t let the small size fool you. The BC600XL is a heavy duty disc-style chipper that can process material up to 6”/15 cm in diameter. A 27 hp/20 kW Kohler Command Pro engine and AutoFeed II® system maximize productivity. The bottom feed stop bar is strategically located to make it possible for the operator’s leg to strike the bar and shut off the feed whether intentionally or automatically in an emergency situation.

BC1200XL - Brush Chipper

We like a challenge. With the ability to handle brush up to 12” (30.5 cm) in diameter, the BC1200XL delivers on tough jobs. Choose between an 85-hp (63.4 kW) or 110-hp (82 kW) Cummins Tier 3 diesel engine. The exclusive SmartFeed system boosts productivity and reduces engine strain while a dual-motor hydraulic infeed delivers 3600-lb (1632.9 kg) of theoretical pull-in force. Add the standard bottom feed stop bar which allows an operator to...

BC1800XL - Tier 3 Brush Chipper

Tackle wood waste measuring up to 19”/48.3 cm with the powerful BC1800XL. Four engine options ranging from 115 hp/85.8 kW to 170 hp/126.8 kW allows you to select your ideal level of power. Patented SmartFeed control system monitors engine performance, and then either reverses or stops the vertical feed rollers as needed. Add on an optional winch with 150’/45.7 m line to move logs up to 2,000 lbs/907 kg onto the feed table.

Vermeer - BC900XL - Brush Chipper

The new Vermeer BC900XL brush chipper was designed to eliminate the guesswork out of chipping. No chucking. No ducking. Just smooth chipping performance. Able to chip heavily branched material up to 9” (23 cm) in diameter and 14” (35.5 cm) wide, the BC900XL is ideal for line clearing and general clean-up needs. In combination, the Vermeer exclusive SmartFeed system, and its 40 hp (29.8 kW) Kohler engine, pulls in and processes difficult...

Bale Processors

Vermeer Bale processors help you make the best use of your round hay bales with the least amount of labor. Changing the feeding location promotes a healthier open-range feeding environment and reduces manure-handling issues. Each processor quickly unrolls bales into windrows that give all the cattle equal feeding room. As the bales are processed, dust, mold and mildew are blown away and the hay is aerated, becoming more palatable for your herd. Reclaim and protect seeding areas by mulching straw and spreading it up to 50' (15 m) away.

BP8000 - Bale Processor

Built to give the professional farmer or rancher many years of reliable performance, the BP8000 takes the labor out of transporting and processing round hay bales. Discharges hay or mulch at distances up to 50' /15.24 m, making it an ideal choice for large-scale fruit and vegetable growers, land reclamation or roadside mulching.

Stump Cutters

Since Vermeer invented the stump cutter in the 1950s, stump removal is no longer the back-breaking, time-consuming chore it used to be. With the Vermeer exclusive AutoSweep system, stumps are simply swept away, one pass after another. Tough, reliable and easy to use on virtually any type of hardwood tree.

SC852 - Stump Cutter

Engineered for an ideal balance of power and agility, the slim SC852 stump cutter can glide through a standard 36”/91.4 cm gate and still deliver 85 hp/63 kW of stump-grinding power. The Yellow Jacket™ Cutter System helps extend pocket and tooth life and facilitates routine maintenance. All-wheel drive, varying speed and heavy-duty rubber tires gets you in and around residential or off-road job sites with ease.

SC372 - Stump Cutter

For residential or municipal stump removal, the SC372 goes to work with a combination of power and agility. Its compact frame can navigate tight spots, but doesn’t leave a big footprint. An optional AutoSweep® system boosts productivity, while electric clutch engagement eliminates the need for manual adjustments.

SC60TX - Stump Cutter

Combining exceptional power and enhanced mobility, the SC60TX is the ideal self-propelled stump cutter when you need a compact machine. Its undercarriage retracts to a mere 35”/89 cm wide for confined areas. Rubberized tracks maneuver easily on virtually all kinds of terrain or ground conditions. Patented AutoSweep system and gear drive help improve productivity. Yellow Jacket Cutter System helps extend pocket and tooth life and facilitates...

SC252 - Stump Cutter

Equipped with exclusive features, the SC252 provides full-sized stump-cutting power in a compact unit. Safety features include a patented cutter wheel guard and an operator presence system that disengages the cutter wheel if the operator lets go of the controls. Yellow Jacket Cutter System helps extend pocket and tooth life. Opt for the exclusive Vermeer AutoSweep technology that adjusts the cutter wheel swing speed automatically to reduce engine and...

SC652 - Stump Cutter

The powerful SC652 powers through stumps and across difficult ground conditions with ease. Patented AutoSweep system and gear drive help improve productivity. All-wheel drive and varying speed provide greater control and exceptional maneuverability. Optional 34”/86 cm front-mounted chip blade is handy for moving chips when the stump is eliminated.

SC802 - Stump Cutter

Cut the big jobs down to size with the powerful 78 hp/52kW turbo-charged SC802 stump cutter. Between its patented AutoSweep gear-drive cutter system and an impressive 103”/262 cm sweep arch and 60”/152 cm tongue extension, the SC802 makes short work of even big, tough hardwood stumps.

SC1152 - Stump Cutter

Powerful enough to handle large, land-clearing projects but narrow enough to fit through a standard 36”/91.4 cm gate, the SC1152 stump cutter is loaded with innovative features. Variable speed saves you time on the job. Joystick controls are easy to master. Super-sized 27”/68.6 cm cutting wheel swiftly grinds away stubborn hardwood stumps. The Yellow Jacket™ Cutter System helps extend pocket and tooth life and facilitates routine...

SC30TX - Stump Cutter

With a focus on ease-of-operation, the compact design of the SC30TX offers intuitive controls, minimal service points and the performance of a machine that gets the job done. The modified operator presence handle design is now manufactured with a harder exterior to improve wear and appearance. This user-friendly handle system provides additional capacitance sensing capability and is intended to help protect the operator.

Trommel Screens

Built for screening efficiency, Wildcat trommel screens were designed by actual operators. The large feed hopper sits low to the ground, so it’s easy to feed material into the screening drum. A large throat opening between the hopper and drum helps minimize material bridging.

TR510 - Trommel Screen

Produce consistent, top-dollar compost even on smaller sites with the TR510. Compact design and pintle hitch make it easy to tow behind a 2-ton dump truck. Efficient 49 hp/36.5 kw John Deere PE 4024T Tier 3 engine is paired with a 5’/1.50 m drum and 5 cubic yards/3.82 cubic meter hopper for efficiency. Access the drum through removable side panels, drum end or top of the drum for added convenience.

TR521 - Trommel Screen

Designed for topsoil with high moisture content, the TR521 is outfitted with a 5’/1.50 m drum and a hopper that holds 5 cubic yards/3.82 cubic meters. The 65’/19.81 m conveyor helps process wet material with consistent results. Access the drum through removable side panels, drum end or top of the drum. Get the day’s job done with the 521’s powerful and efficient 99 hp/73.8 kw John Deere 5030HF Tier 3.

TR516 - Trommel Screen

Produce consistent results when you process material on the TR516. Heavy duty 66 hp/49 kw John Deere PE 4024T Tier 3 engine is paired with a 5’/1.50 m drum and 5 cubic yards/3.82 cubic meter hopper for efficiency. 20’/ 6.1 m conveyor improves aeration. Access the drum through removable side panels, drum end or top of the drum for added convenience.

TR516TX - Trommel Screen

Produce consistent results when you process material on the TR516TX. Highly efficient 79 hp/58.9 kw Deutz 4L2011 Tier 2 engine keeps material moving up the 20’/ 6.1 m conveyor. The 5’/1.50 m drum and 5 cubic yards/3.82 cubic meter hopper are sized to handle most operations. Access the drum through removable side panels, drum end or top of the drum for added convenience. Machine is mounted on tracks to aid in positioning of machine at...

TR626 - Trommel Screen

With a 6’/1.83 m drum and a hopper that holds 7.5 cubic yards/5.73 cubic meters, the TR626 makes short work of processing material. Access the drum through removable side panels, drum end or top of the drum. Its 125 hp/93.2 kw John Deere 4045 Tier 3 is a powerful workhouse. Impressive 72.5’/22.1 m conveyor features self-cleaning tail pulley and return idlers.

Whole Tree Chippers

WC2300 - Whole Tree Chipper

The WC2300 is a powerful, efficient whole-tree solution for the tree care industry. Whether used to produce wood chips for power generation, or by loggers who want to generate additional revenue from all parts of felled trees, the WC2300 performs. It features a 440-horsepower (328.1 kW) CAT Tier 3 engine and can chip through material up to 23 inches in diameter. The infeed system maximizes productivity and minimizes material handling by the operator....

Disc Mowers

Vermeer improved the standard design for disc mowers with innovations that produce high cutting performance while reducing maintenance needs. Each one features a bi-shaft design with each disc self-contained and pre-packed with its own set of gears, bearings and lubricants to increase operating life. Add in heavier cutting discs, super-sized skid shoes and other features, and you’ve got a disc mower that gets the job done.

5040 - 3 Point Disc Mower

With a 6' 9'/2.1 m cutting width, the 5040 disc mower is designed to cut acre after acre with minimal maintenance. The exclusive Vermeer bi-shaft design provides each disc with its own set of gears, bearings and lubricants – and the gears stay in the grease, even when mowing at angles. Extra wide skid shoes eliminate pinch points to protect against rock damage and simplify blade replacement.

6040 - 3-Point Disc Mower

The 6040 disc mower is loaded with features that help reduce maintenance and promote long life. It powers through every mowing job with its 7'10'/2 m cutting width and exclusive bi-shaft design. Each disc has its own set of gears, bearings and lubricants. Extra wide skid shoes eliminate pinch points to protect against rock damage and simplify blade replacement.

7040 - 3-Point Disc Mower

The Vermeer 7040 disc mower delivers high performance with minimal maintenance. Exclusive bi-shaft design provides each disc with its own set of gears, bearings and lubricants – and the gears stay in the grease, even when mowing at angles. Extra wide skid shoes eliminate pinch points to protect against rock damage and simplify blade replacement. Seven discs mow a width of 9'2'/2.8 m with each pass.

8040 - 3-Point Disc Mower

Cutting 10' 6'/3.2 m swaths to make short work of any landscape, the Vermeer 8040 disc mower features the exclusive tri-shaft design for long-lasting performance. Each disc is self-contained with its own set of gears, bearings and lubricants – and the gears stay in the grease, even when mowing at angles. Extra wide skid shoes eliminate pinch points to protect against rock damage and simplify blade replacement.

Mower Conditioners

Mowing and crimping or crushing acre after acre of hay, cane and other forages for faster curing is tough on equipment. That’s why Vermeer mower conditioners are equipped with innovations like the patented DynaGuard® swing-back suspension, our exclusive Quick-Clip™ blade retention system, extra-wide skid shoes and more.Vermeer mower conditioners are built to tackle any field and deliver superior performance, easier maintenance and better equipment protection.

MC840 - DiscPro Mower Conditioner

When you need a mower conditioner so that you can cure hay rapidly, Vermeer is the brand to buy. The MC840 DiscPro® steel roller conditioner or spring-steel paddles were designed with the features farmers need. From the patented DynaGuard® swing-back suspension to our exclusive Quick-Clip™ Blade Retention System, the cost-efficient side-pull MC840 crimps or crushes as it cuts 10'6'/3.2 m widths of forage.

MC1030 - DiscPro Mower Conditioner

The Vermeer MC1030 DiscPro® is one of the most flexible mower conditioners you can buy. Available with either steel conditioner rollers or our exclusive paddle-style conditioner, the MC1030 features the Vermeer patented DynaGuard® swing-back suspension, exclusive Quick-Clip™ Blade Retention System and other innovations. With a 13'3'/4 m width, you can cut and cure hay with remarkable efficiency.

Rakes

There’s no trick to achieving faster dry down and tightly rolled bales that preserve quality, shed water and transport easily. All you need are the right tools. It’s a cinch to form the windrows for bales with one of the Vermeer exclusive hay rakes. Vermeer offers more options, so you can find the rake that fits your operation: twin basket rakes, high-capacity wheel rakes and rotary rakes. Built rugged to last, all models have feature after feature to help reduce the work of haying.

R2300 - TwinRake

The secret to good bales starts with, box-shaped windrows. That’s what the Vermeer R2300 TwinRake is designed to produce. Built to last, the R2300 allows you to adjust the width of the windrows to match your baler. Control the width, basket lift and folding/unfolding systems right from the cab of your tractor.

R2800 - TwinRake

Get great-looking bales quickly and easily. It all starts with the Vermeer R2800 twin rake, which produces box-shaped windrows. Built to last, the R2800 allows you to adjust the width of the windrows to match your baler. Control the width, basket lift and folding/unfolding systems right from the cab of your tractor.

VR820 - Carted Wheel Rake

Just like other Vermeer innovations, the VR820 carted wheel rake combines high performance and superior reliability with features that make it easy to operate. Rake field after field with ease, thanks to a rugged channel tongue with adjustable hitch heights and telescoping tool bars that allow you to change raking and windrow widths with ease. Patented rubber torsion toolbar suspension requires no tools. Single side raking is easily achieved by simply...

VR1022 - Carted Wheel Rake

When you’re making hay, you need the reliability, strength and high performance capability of the VR1022 Carted Wheel Rake. Featuring a number of Vermeer innovations, the VR1022 is easy to operate and built for high-volume raking. Take on each field with adjustable hitch heights and telescoping tool bars that allow you to change raking and windrow widths with ease. Patented rubber torsion toolbar suspension requires no tools.

RR150 - Rotary Rake

Increase the airflow to your forage when you create windrows with the clean-sweeping RR150 Rotary Rake. Easy to operate, easy to maintain, it forms ideally-shaped windrows that measure up to 181'/4.6 m for uniform drying. Select the volume of hay per windrow, making one pass for heavy crop conditions, or two or more passes for lighter crops.

Rock Pickers

Whether you’re a farmer or a contractor installing utilities or clearing sites for development, you know how a rock can cause damage to your machinery. Remove rocks efficiently and easily with a Vermeer rock picker.

Tedders

There’s no trick to achieving faster dry down and tightly rolled bales that preserve quality, shed water and transport easily. All you need are the right tools. Vermeer specially designed tedders to turn cut hay so that it dries more evenly. Vermeer offers more options, so you can find the tedder that fits your operation. Built rugged to last, all models have feature after feature to help reduce the work of haying.

TR90 - Rebel Series Tedder

The Rebel TR90 Tedder is a compact tedder/rake combination made for small operations or part-time farmers. Easy to operate, easy to set up. Select from one of five settings on the rotor wheels to change the spreading angle or tedding height. To switch from tedding to windrowing, just adjust each tine and fold down the raking baskets.

TE170 - Tedder

Get faster dry down with the “bottoms up” action of the TE170 Tedder. The exclusive Vermeer hooked double tines work together, picking up the drier material on the surface while flipping the wetter material on top, gently separating lumps. Built low for added stability when tedding on slopes, the TE170 is ideal for smaller operation, with a sturdy, compact design that folds hydraulically to a narrow transport width.

TE250 - Tedder

With extra maneuverability that lets you make tight turns, the TE250 Tedder features the exclusive Vermeer hooked double tines that flip your crop instead of blending it for faster dry-down. Get a full 25'/7.62 m of tedding action along the stable double-framed tedder arms. Pivot points along the driveline allow the tedder to flex along the contour of your field for excellent results without extensive digging. Unique trailed framework and hydraulic...

TE330 - Tedder

Designed to maneuver like a model half its width, the TE330 gives you an impressive 33.5'/10.2 m of tedding action. Tight turning circle and constant-velocity U-joints improve handling. Unique trailed framework and hydraulic lift and fold provide convenient transporting. Double-framed construction stabilizes tedder arms as they meet the contour of your fields with pivot points along the driveline for superior flex. And the exclusive Vermeer hooked...

TD120 - Rotary Tedder

Stir up hay and speed up dry-down with the TD120 Rotary Tedder. With a working width of 10'4'/3.1 m and six tine arms per rotor, the TD120 can cover a whole field rapidly, even when attached to a tractor as small as 15 hp/11.5 kW.

TD200 Rotary Tedder

Tedding is fast and easy with the TD200 Rotary Tedder. Featuring six tine arms per rotor, this machine rapidly and gently shifts material so that it dries down faster. Articulated folding frame adjusts to contours as you go, reaching the low spots as it fluffs up matted hay. Optional hydraulic fold enables you to transport from field to field without leaving your seat.

Trailed Mowers

Many mowers have 3-point hook-up, with mounting brackets that take time to hook and unhook. Vermeer redesigned the way trailed mowers attach to tractors, using an easy as a drop of a pin hook-up system and plenty of other innovative features. The Vermeer trailed mowers also require less horsepower and offer better flotation than 3-point mowers. Light and efficient, easy to use and easy to maintain, Vermeer trailed mowers are the ones you want behind your tractor.

TM600 - Rebel Series Trailed Mower

When you want an easy-to-use, easy-to-maintain trailed mower, hitch up the TM600 Rebel to any 50+ hp/37+ kW tractor with the simple drop of a pin. This side-pull rotary disc mower has a cutting width of 8'1'/2.5 m. To help reduce maintenance, each of its six discs is self-contained with its own set of gears, bearings and lubricants – and the gears stay in the grease, even when mowing at angles.

TM700 - Rebel Series Trailed Mower

With a simple drop of the pin, you can hook up the TM700 Rebel Trailed Mower to any 55+ hp tractor and start cutting 9'2'/2.8 m rows out of your fields. This side-pull rotary disc mower is designed to be easy to use and easy to maintain, too. Each of the seven discs is self-contained with its own set of gears, bearings and lubricants – and the gears stay in the grease, even when mowing at extreme angles.

TM800 - Rebel Series Trailed Mower

Featuring a tri-shaft design for easy maintenance, the TM800 Rebel Trailed Mower hitches up easily and keeps you efficiently mowing a width of 10'6'/3 m. Each of the eight discs in this side-pull rotary disc mower is self-contained with its own set of gears, bearings and lubricants – and the gears stay in the grease, even when mowing at angles.

TM1200 - Trailed Mower

The heavy-duty, center pivot TM1200 trailed mower cuts an impressive 15' 6'/4.7 m, but folds neatly in half for transporting to the next field. Cutterbars are staggered and overlapped for complete cutting action down the middle. To lower maintenance needs, each of the 12 discs is self-contained with its own set of gears, bearings and lubricants – and the gears stay in the grease, even when mowing at extreme angles.

TM1400 - Trailed Mower

Cut down your mowing time with the heavy-duty, center pivot TM1400 trailed mower. It mows a remarkable 18’/5.5 m with staggered and overlapped cutter bars so you achieve complete cutting action right down the middle. When the field is done, the TM1400 folds to a transport width of only 8’6”/2.5 m. Each of the 14 discs is self-contained with its own set of gears, bearings and lubricants – and the gears stay in the grease, even...

Bucket Wheels

Trenching in soft soils can be tricky. The bucket wheel is designed to help increase productivity in soft soils. Instead of the typical chain configuration, which positions the carbide trencher teeth in a specific formation or pattern, the wheel features a series of buckets, which rotate in a circular motion helping move more dirt from the trench.

T655 - Commander 3 Tractor

Cut through tough ground conditions with the T655 COMMANDER® 3 tractor with optional trencher or bucket wheel attachment. Its Tier 3 John Deere 6090 HF diesel engine provides the power to dig up to 8’/2.4 m deep. Low-speed, high torque splined headshaft motor improves cutting performance and minimizes chain wear, while the exclusive Vermeer TEC® Plus electronic control system monitors real-time machine performance.

AXIS - GB812 - Guided Boring System

When it comes to installing sewer and water lines, your main goals are on-grade accuracy and exceptional productivity. The AXIS GB812 Guided Boring System from Vermeer delivers both. The closed-circuit camera built into the drill head allows the operator to constantly monitor line and grade, while the vacuum excavation method removes spoils efficiently without the need for manual labor. Plus, the unit’s modular design can be configured in a...

Mini Skid Steers

On the commercial jobsite or at home, use the versatile Vermeer mini skid steer. Designed according to customer input, these skid steers fit into small spaces and are lightweight enough to use on most landscape surfaces. Intuitive joystick controls are easy to master, and several industry-leading safety features help protect the operator.

S400TX - Mini Skid Steer

Bring all kinds of tasks down to size with the S400TX. Its 23 hp/17.2 kW engine provides 15% more power than the closest competitor. Compact and lightweight enough to operate over sensitive turf areas, the S400TX delivers big performance with a dump height of nearly 72”/192 cm and rubber tracks for superior maneuverability.

S600 - Mini Skid Steer

Reduce time-intensive labor on a multitude of tasks at home or on the jobsite. The small but mighty S600 is built with all the features our customers asked for, from the 30 hp/22 kW gas or 25 hp/19 kW diesel engine options to the 3-year/3000-hour limited warranty on the main frame and boom loader arms.

S600TX - Mini Skid Steer

Reduce time-intensive labor on a multitude of tasks at home or on the jobsite. The small but mighty S600TX is built with all the features our customers asked for, from the 30 hp/22 kW gas or 25 hp/19 kW diesel engine options to the 3-year/3,000-hour limited warranty on the main frame and boom loader arms.

S800TX - Mini Skid Steer

One of the most versatile mini skid steer on the market doesn’t sacrifice an ounce of performance. With an arsenal of easy-to-replace attachments and intuitive controls, the S800TX is ready to take on anything. And its 35 hp (26.1 kW) engine won’t back down from the job. We back it up with a 3 year or 3,000 hour limited warranty coverage on the mainframe and boom loader arms.

S650TX - Mini Skid Steer

Designed with the multitasker in mind. The addition of the S650TX mini skid steer to the Vermeer lineup offers do-it-yourselfers and contractors a versatile solution to their construction and landscaping needs. The unit is equipped with a four pump system for both hydraulic and overall machine performance allowing operators to power attachments effectively and save time on the jobsite. For those tough, heavy jobs, the S650TX showcases a rated...

Mix Systems

The proper drilling fluid mix is critical to achieving maximum productivity. Vermeer engineered a series of drill fluid mixing systems to quickly combine water with polymers, wetting agents, bentonites, and other additives. Choose the system that matches your drill rig.

MX125 - Mixing System

Optimize your horizontal directional drill’s performance with the MX125. Designed for small-diameter, short distance horizontal directional drilling jobs, the MX125 is powered by a 6.7 hp/5 kW Honda gas engine. It comes with your choice of a 300 gallon/1136 L or 500-gallon/1892-L tank.

MX240 - Mixing System

Horizontal directional drills work most efficiently when they are matched with the right-sized mixing system. The MX240 quickly mixes high volumes of fluid for a variety of bores. With the power of a 25 hp/18.6 kW Kohler gas or 22 hp/16.4 kW Hatz diesel engine, the MX240 can support either a 750 gallon/2,839 L or 1,000 gallon/3,785 L tank.

Plows

Vermeer offers a variety of plow options that help power down through turf with minimal ground disturbance. The result is highly efficient installation of cables, utility lines, irrigation pipe and more.

LM42 - Plow/Trencher with Optional Attachments

Built for high maneuverability and easy operation, the LM42 tackles tough jobs with a powerful 42 hp/31 kW Deutz® engine. This workhorse includes plow centering springs, a servo-controlled ground drive pump and safety features such as insulated controls and an operator-presence system.

RT450 - Ride-On Tractor

The RT450 ride-on tractor bullies through underground installations. It combines the powerful performance and rugged construction that contractors demand with automobile-style handling.

Rockwheel Attachments

Cut through rock, concrete and other tough surfaces easily with a Vermeer rockwheel. Designed to take on challenging ground conditions, these rockwheels will give you clean, straight-sided trenches for all sorts of underground installations.