biogas blowers Equipment

34 Results found
  • Category: Energy & Renewables ×

  • Subcategory: Biogas ×

  • Keyword: biogas blowers ×

DELTA BLOWER - Blower Units for Landfill Gas and Biogas

by Aerzener Maschinenfabrik GmbH     based in Aerzen, GERMANY

The positive displacement blower units DELTA BLOWER have been modified specially for applications in the range of landfill- and biogas as well as also natural - or town gas. Intake volume flow approx. 60 up to 2.500 m³/h.

Blowers - Biogas Blowers

by Airtechnic Solutions - a Hotraco Group company     based in Horst a/d Maas, NETHERLANDS

By utilizing aluminum or stainless steel impellers, Continental Industrie blowers are extremely suitable for applications in environments with a risk of explosion, like biogas plants. The standard shaft seal makes sure that the blower is gastight. Also seals which can withstand positive pressures up to 80 mbar at the inlet side can be ...

BioGas - Triple Membrane Gas Holder

by BioGas Products Ltd.     based in Brierley Hill, UNITED KINGDOM

Biogas Products Ltd are leading UK specialists in the supply and installation of triple membrane gas holders for use on biogas plants. We work with Italian based specialists Ecomembrane S.r.l , to supply the UK with a design patented triple membrane gas holder and innovative gas bag level sensor. The triple membrane gas holders range in size from ...

Blowers with Frequency Inverter

by BIOKOMP Srl     based in Villaverla, ITALY

If the gas demand varies in time (such as for burner or engine feeding), we can supply blowers equipped with a motor intended for control via frequency inverter. The rpm range of the blower (and therefore the output frequency range of the frequency inverter) can be adjusted according to the foreseen operating conditions, and in particular to the ...

Multistage Centrifugal Blowers

by BIOKOMP Srl     based in Villaverla, ITALY

Centrifugal blower is generally made of an intake duct conveying the aspirated gas to the impeller inlet, which is coaxial to the shaft; a closed impeller with axial flow inlet and radial flow exit; a radial diffuser, whose aim is to convert kinetic energy into static pressure at the impeller exit; a discharge volute.

Side Channel Blowers

by BIOKOMP Srl     based in Villaverla, ITALY

The single-stage side channel blowers, for biogas or natural gas, in the so-called 'CLOSE COUPLED' version. The most common fields of application are: landfill biogas recovery to feed torch, burner or gas engine, tank, plant or contaminated soil gas recovery to feed torch or burner; extraction of biogas from gasometer, natural gas from pipeline or ...

Blowers with Gas Recirculation

by BIOKOMP Srl     based in Villaverla, ITALY

When the gas has to feed a burner or when a variable gas flow is required, a 'compact by-pass', directly bolted to the machine and connecting outlet and inlet ports, is a simple and effective solution. A suitable overpressure relief valve is fitted inside the 'compact by-pass'. When the gas demand decreases, the outlet pressure increases, and, ...

ennox - Model RAV - Pressure Increase Blower for Digesters and Biogas Reactor

by ennox biogas technology GmbH     based in Hard, AUSTRIA

Digesters and biogas reactors are normally designed and built to cover relatively low system pressures due to cost implications. In order to carry out effective cleaning of the system, operation of a consumer or transfer of the biogas, it is necessary to increase the operating pressure in the pipework.

HOFGAS - Model APM - Gas Treatment Plant For Recovery

by Hofstetter Umwelttechnik AG     based in Schiphol-Rijk, NETHERLANDS

The HOFGAS- APM is a complete pump and flare station for the safe and economic treatment of gas from anaerobic fermentation. Apart from the plant components, a detailed regulation and operational concept is supplied for the specific adaptation to the particular process. In particular, the discharge pressure for recovery is regulated and the signal ...

Biogas Technology - Gas Venting and Flaring Systems

by Biogas Technology Limited     based in Sawtry, UNITED KINGDOM

Our Gas Venting and Flaring systems include electric and diesel driven systems, and range from low cost basic units for economic temporary migration control, to high specification systems equipped for automatic operation and pumping trials. Each is available with a wide range of optional equipment to ensure the system will meet your individual ...

Related Terms for biogas blowers

Need help finding the right suppliers?

Let the XPRTs do the work for you