biogas flares Equipment in France

Served | Office inNear
52 Results found
  • Category: Energy & Renewables ×

  • Subcategory: Biogas ×

  • Keyword: biogas flares ×

  • Location: Europe ×

  • Location: France ×

HOFGAS - Model IFL1c - Flare For Gasholder Operation

by Hofstetter Umwelttechnik AG     based in Solothurn, SWITZERLAND

Standard flare for sewage or biogas plants. Ideal in combination with gasholder operation and gas systems with constant pressure ratios.

HOFGAS - Model IFL4c - Customised Biogas Gas Flaring System

by Hofstetter Umwelttechnik AG     based in Solothurn, SWITZERLAND

Customised HOFGAS-IFL4c biogas gas flaring system is deployed when express regulations on gas emission must be observed. Because of no visible flame, erection of the gas flare is most advantageous even near residential areas.

HOFGAS - Model IFL2c - Standard Flare For Sewage Or Biogas Plants

by Hofstetter Umwelttechnik AG     based in Solothurn, SWITZERLAND

This biogas / WWTP gas flare with insulated combustion chamber and manually air combustion regulation is deployed when express regulations on gas emission must be observed. Controlled combustion of methane gas within high temperature flare.

Biogas Flare

by HydroThane STP BV     based in KC `s Hertogenbosch, NETHERLANDS

HydroThane can deliver different types of emergency burners / flares for biogas - waste (water) treatment plants. Biogas flares have the task of temporary or periodic burning of biogas produced by an anaerobic process in case there is no possibility to use it for energy production.

Model 97310 - Enclosed Flare

by Shand & Jurs (L&J Technologies & L&J Engineering)     based in Hillside, ILLINOIS (USA)

The S&J 97310 Enclosed Burner removes harmful emissions from waste gas streams. This unit is specifically designed to bring emissions levels to within allowable limits as dictated by customer requirements or governmental bodies such as the EPA. Every unit is designed for maximum destruction efficiency for each application’s process ...

GWE - Biogas Flares

by Global Water Engineering (GWE)     based in Bangkok, THAILAND

All anaerobic plants, must be equipped with a biogas flare, for safety reasons. GWE flares are designed to operate at low to medium pressure (<50 mbar), without the need for a biogas fan and for continuous burning in a wide range of biogas flows (5-100 %). This avoids the need for biogas storage systems (e.g. balloons) and keeps the biogas ...

Model 97300 - Waste Gas Burner

by Shand & Jurs (L&J Technologies & L&J Engineering)     based in Hillside, ILLINOIS (USA)

The Shand & Jurs Biogas 97300 Waste Gas Burner is specifically designed to operate efficiently with low BTU anaerobic digester waste gases. The 97300 helps to properly contain and incinerate waste gases thus minimizing odors and VOCs.

Model 97200 - Flame Check

by Shand & Jurs (L&J Technologies & L&J Engineering)     based in Hillside, ILLINOIS (USA)

The Shand & Jurs Biogas 97200 Flame Check provides an in-line barrier against flame flashback in small gas lines. They are typically installed in pilot lines supplying fuel burning devices used in flares and waste gas burners. They are also used in vent piping servicing manometer pressure taps and diaphragm regulators.

Biogas flare

by BioBG GmbH     based in Westerstede, GERMANY

If biogas can’t get stored or removed by CHP cause of maintenance or stoppages, it should get burnt for environ- mental reasons. This can be done by biogas flares. Manually steared flares has to be started and stopped by stuff and are often powered by a 12V lead-acid battery. Fully automatic flares are starting, if there is too much gas- ...

BIOPAQ - Biogas Flare

by Paques B.V.     based in Balk, NETHERLANDS

The BIOPAQ Biogas Flare combines a sturdy quality with a unique compact design aimed at simplicity. This means that methane-rich biogas of a low pre-pressure can be discharged safely and reliably without involving failure-prone rotating equipment such as ventilators or control valves.

Related Terms for biogas flares

Need help finding the right suppliers?

Let the XPRTs do the work for you