Biogas Equipment in Nunavut

Serving Nunavut | Near Nunavut
509 Results found
  • Category: Energy & Renewables ×

  • Subcategory: Biogas ×

  • Location: Canada ×

  • Location: Nunavut ×

GASODRIX - Biogas Drier Package Unit

by Global Water Engineering (GWE)     based in Bangkok, THAILAND

Biogas is coming out of the anaerobic digesters saturated with water vapour. At the usual digester temperature of mesophilic anaerobic digesters of around 30°C, this means that the biogas contains about 5% water, or about 50 g/Nm³ biogas. If the temperature of the biogas subsequentely drops, some of that water will condense into liquid.

Biogas Plants for Slaughterhouses

by BIOGAS NORD AG     based in Bielefeld, GERMANY

Biogas Nord, now offers a plant specially designed for slaughterhouses. A biogas plant next to your slaughterhouse turns your slaughterhouse waste, which until now you have been paying to dispose of, into energy you can use or sell.

Model E Series - Economical Biogas Contaminant Removal System

by Pioneer Air Systems     based in Wartburg, TENNESSEE (USA)

Gas is filtered by an inlet scrubber before the gas to refrigerant (or glycol) heat exchanger to remove entrained particulates & liquids; and, to keep heat exchangers clean. The gas to refrigerant heat exchanger cools gas to 40oF before its compressed, which protects blower/compressor.

Model TCR Series - Total Containment Biogas Contaminant Removal System

by Pioneer Air Systems     based in Wartburg, TENNESSEE (USA)

Using Subzero Air to Remove Siloxanes and Other Pollutants. Pioneer offers a range of options and solutions for cleaning, compressing & drying energy rich LFG, DG & Bio gases. In addition to cooling, activated carbons and desiccants are effective in separating most contaminants; however, the media regeneration and disposal costs are high. ...

Model C6Z to C18Z-G - Landfill Gas, Biogas, Sludge Gas, Mine Gas Screw Compressors

by RKR Gebläse und Verdichter GmbH     based in Rinteln, GERMANY

Volume flow: 2 m3/min to 31 m3/min, Overpressure: 1 to 3.5 bar, Motor power: up to 160 kW, Drive: direct drive with coupling

Pro2 - Sewage Gas

by Pro2 Anlagentechnik GmbH     based in Willich, GERMANY

Treatment of wastewater and digestion of sewage sludge produces sewage gas containing methane. We utilise this energy rich gas in our co-generation power plants to generate energy efficiently. The resulting quantities of heat and power make it possible to supply a sewage treatment plant – in some cases completely self-sufficiently. Sometimes ...

Model FT - Biogas Foam Monitor

by Bilgeri EnvironTec GmbH     based in Fussach, AUSTRIA

In the operation of digesters may under certain circumstances for foam formation in the gas space come (eg mixing processes in the reactor, by Gaseinpressungsvorgänge, unfavorable composition of digested sludge, temperature influence ...). The modern EnvironTec foam trap can detect the formation of foam in time and the penetration of the ...

SUMA - Model Rekordmix B1 - Long Axis Agitators

by SUMA Rührtechnik GmbH     based in Sulzberg, GERMANY

The SUMA Rekordmix  B1 has been specifically developed for biogas installations which consist of membrane covered ponds. The Rekordmix B1 uses an electric motor and can be retrofitted to other pond environments.   This purpose built agitator comes with a feed through, rubber sealing diaphram that is gas tight. Ensuring the integrity ...

SUMA - Model Optimix 2G - Submersible Mixer for Biogas Digesters

by SUMA Rührtechnik GmbH     based in Sulzberg, GERMANY

This powerful ATEX certified submersible mixer (4.0, 9.0 or 15 kW) now offers even more possibilities to achieve optimal gas flow and mixing results in your biogas digester.

SUMA - Model Optimix 3G - Submersible Motor Agitator

by SUMA Rührtechnik GmbH     based in Sulzberg, GERMANY

The SUMA Optimix 3G is our most powerful submersible motor agitator. The Optimix 3G is a multi-purpose mixer specifically designed for biogas plants, industry and liquid manure installations. This durable mixer has our latest agitation technology, stream-lined housing and is Explosion Zone 2 approved.

Need help finding the right suppliers?

Let the XPRTs do the work for you