waste incinerators Equipment in Canada

227 Results found
  • Category: Energy & Renewables ×

  • Subcategory: Incineration ×

  • Keyword: waste incinerators ×

  • Location: Canada ×


Questor - Q100 - Incinerator

by Questor Technology Inc.

Maximum throughput: 100,000 scf/d of methane equivalent gas. Fuel requirement: (varies depending upon waste gas composition). Design operating temperature: 600 to 1200 oC. 

Verantis - Rotary Kiln Incineration Systems

by Verantis Environmental Solutions Group

Complete flexibility to simultaneously dispose of liquids, solids, and sludges. Rotary kiln incineration systems are ideal for processing mixed industrial and hazardous wastes that include a combination of solid, sludge, and liquid waste streams. Verantis provides complete rotary kiln incineration packages including a broad range of waste storage ...

Grate kiln for Incineration

by MAGUIN SAS - a Moret Industries Company

Capacity: 250 kg/h to 3 t/h The grate kiln enables treatment of solid waste such as hospital, municipal, industrial waste ..... The waste is loaded into a feed hopper and continuously introduced into the furnace by a push-feeder located at the bottom of the hopper. This range of kilns is equipped with all the devices necessary to operate the plant ...

Incinerators & Waste System

by ATK Equipment

Where recycling is not an option waste can be incinerated in a cost effective and clean fashion using the Trashx Incinerator. Furthermore the heat generated can be used to heat factory buildings by simply adding a hot air recovery unit. The Trashx Incinerator is available in a variety of sizes to suit most needs. Simple, low cost industrial ...

Igniss Energy - Rotary Kiln - Medical and Hazardous Waste Incinerator

by Igniss Energy

The waste is arriving in approximately 0,3 -5 ton/hour. The waste goes into the rotating drum where it is +/-1200 degree Celcius. This type of incinerator is used for hazardous, medical and chemical waste. It is also possible to burn domestic waste, but the installation must be economical profitable.

Questor - Q250 - Incinerator

by Questor Technology Inc.

Design Basis of Q250. Maximum throughput: 250,000 scf/d of methane equivalent gas, Fuel requirement: (varies depending upon waste gas composition), Design operating temperature: 600 to 1200 oC. 

Questor - Q50 - Incinerator

by Questor Technology Inc.

Design Basis of Q50: Maximum throughput: 50,000 scf/d of methane equivalent gas, Fuel requirement: (varies depending upon waste gas composition), Design operating temperature: 600 to 1200 oC.

Regenerative Thermal Oxidizers (RTO) For Waste Gas Incinerators

by Flare Industries LLC

Regenerative Thermal Oxidizers (RTO) are waste gas incinerators that employ multiple beds of ceramic media that absorb heat from the exhaust gas and use this captured heat to preheat the incoming process streams. RTO's are often used in applications such as at paint booths, printing mills, and paper mills which produce low VOC concentrations in ...

Caldo - Specialised Incinerators

by Caldo Engineering Ltd.

Collaboration with EODS; One of the first pollution control systems that Caldo supplied was a ceramic filter for the removal of particulates and acid gases from waste gas produced by the incineration of ammunition at the MoD site at Shoeburyness. It was clear at the time that the incineration end of the process was quite basic, with potential to ...

Waste Heat Recovery Boilers

by Indeck Power Equipment Company

Indeck offers years of experience utilizing waste gases and recovering its energy in the form of steam. Steam generation is an ideal way to recover waste heat energy from these gases in a form most easily utilized. Enormous quantities of heat energy inherent in exhaust gases from various industrial processes can be recovered to reduce energy ...

Need help finding the right suppliers?

Let the XPRTs do the work for you