Environmental Management Equipment in Austria

10548 Results found
  • Category: Environmental Management ×

  • Location: Europe ×

  • Location: Austria ×


multi N/C - 2100/2100 S - TOC/TNb analyzer

by Analytik Jena AG

The multi N/C 2100 is the space-saving TOC/TNb analyzer which demonstrates its strength particularly in the field of environmental analysis. Along with VITA, the FR NDIR detector and catalytic high temperature combustion up to 950 °C, multi N/C 2100 is equipped with a perfect injection technique for particle containing samples. The integrated ...

Processing of Alternative Fuels (RDF)

by Lindner-Recyclingtech GmbH

RDF is a fuel that is normally produced from waste with high calorific value. The original waste comes from households, industry and commerce and is processed for energy extraction; it is meant for co-incineration plants and replaces standard fuels (e.g. coal) in production plants for cement, power plants or other co-incineration plants.

Noise Tutor NMS Rapid Deployment Noise Monitoring System

by Larson Davis, a division of PCB Piezotronics

Integrated Internet Solution for Remote Noise Monitoring. Continuous monitoring of environmental data in remote areas has always presented a unique set of challenges. Typical solutions involve complex installations, frequent visits to remote locations to keep the system fully operational and require expert level attention to retrieve and share ...

SoundTrack - LxT Model LXT1-QPR - Firearms Acoustic Analysis

by Larson Davis, a division of PCB Piezotronics

Quantitative Measurements of Sound Pressure Levels Generated by Firearms with & Without Suppression Devices. Many firearm examiners are tasked with determining whether installation of a suppressor on a firearm results in a “perceptible” reduction of the sound pressure level of a gun. The Larson Davis SoundTrack LxT provides this ...

Model BAS001 - Omnidirectional Sound Source

by Larson Davis, a division of PCB Piezotronics

The BAS001 Source is designed to generate omni-directional sound fields for making standard compliant measurements including: reverberation time (ISO 3382, ASTM E2235), building acoustics (insertion loss, acoustic absorption area, etc: ISO 140-4 ISO 140-3, ASTM E336, ASTM E90, DIN 55 210). The BAS001 is typically used to saturate a room with a ...

Model BAS003 - Directional Sound Source

by Larson Davis, a division of PCB Piezotronics

The BAS003 Source is designed to generate homogeneous sound fields using random noise in compliance with the following standards: Building acoustics (insertion loss, acoustic absorption area, etc: ISO 140-3, ASTM E90, ISO 140-5, ASTM E966). The BAS003 is typically used to generate a noise in a free-field for the evaluation of the transmission loss ...

Model BAS002 - Amplifier

by Larson Davis, a division of PCB Piezotronics

Measurement of reverberation time, sound isolation, and absorption coefficient are generally important measurements when verifying that a space or material complies with design goals. When making these measurements in the field or laboratory it is important to have equipment that is dependable, portable and easy to set up and use. When coupled ...

Model 381-NMS - Permanent Noise Monitoring System

by Larson Davis, a division of PCB Piezotronics

An Integrated Hardware & Software System with Digital Communication and an Open Interface for Long Term Noise Monitoring Applications. The Model 831-NMS permanent noise monitoring system is designed for long term monitoring around airports, industrial facilities, motorsport complexes, wind farms, mining operations, and within the general ...

IONICON - Liquid Calibration Unit (LCU) - Versatile Trace Gas Calibration by Evaporation of Liquid Calibration Standards

by Ionicon Analytik Ges.m.b.H.

The IONICON Liquid Calibration Unit (LCU) evaporates aqueous standards into a gas stream, resulting in a gas flow containing compounds at defined trace concentrations. This gas can be used for precise calibration of trace gas analyzers over an extensive range of compounds and concentrations.

Verderflex - Dura 5 & Dura 7 - High Pressure Low Volume Dosing (HPLV)

by Verderflex Peristaltic Pumps - part of the Verder Group

The Dura 5 & Dura 7 HPLV (High Pressure Low Volume Dosing) delivers stable sub-litre per hour flows at either 5 or 8 Bar in a rugged hose pump format.

Need help finding the right suppliers?

Let the XPRTs do the work for you