Environmental Management Equipment in Portugal

10461 Results found
  • Category: Environmental Management ×

  • Location: Europe ×

  • Location: Portugal ×


ReCyclone EH - Electrostatic Recirculation System

by Advanced Cyclone Systems, S. A.

Recent adoption of electrostatic recirculation in the same cyclone system has successfully proven to further reduce particle emissions, even in the [1;5] μm particle size range, assuring future regulation compliance, particularly where legal limits are very tight, with the objective of bag filter redundancy. Application: POWDER RECOVERY: ...

Noise Tutor NMS Rapid Deployment Noise Monitoring System

by Larson Davis, a division of PCB Piezotronics

Integrated Internet Solution for Remote Noise Monitoring. Continuous monitoring of environmental data in remote areas has always presented a unique set of challenges. Typical solutions involve complex installations, frequent visits to remote locations to keep the system fully operational and require expert level attention to retrieve and share ...

SoundTrack - LxT Model LXT1-QPR - Firearms Acoustic Analysis

by Larson Davis, a division of PCB Piezotronics

Quantitative Measurements of Sound Pressure Levels Generated by Firearms with & Without Suppression Devices. Many firearm examiners are tasked with determining whether installation of a suppressor on a firearm results in a “perceptible” reduction of the sound pressure level of a gun. The Larson Davis SoundTrack LxT provides this ...

Model BAS001 - Omnidirectional Sound Source

by Larson Davis, a division of PCB Piezotronics

The BAS001 Source is designed to generate omni-directional sound fields for making standard compliant measurements including: reverberation time (ISO 3382, ASTM E2235), building acoustics (insertion loss, acoustic absorption area, etc: ISO 140-4 ISO 140-3, ASTM E336, ASTM E90, DIN 55 210). The BAS001 is typically used to saturate a room with a ...

Model BAS003 - Directional Sound Source

by Larson Davis, a division of PCB Piezotronics

The BAS003 Source is designed to generate homogeneous sound fields using random noise in compliance with the following standards: Building acoustics (insertion loss, acoustic absorption area, etc: ISO 140-3, ASTM E90, ISO 140-5, ASTM E966). The BAS003 is typically used to generate a noise in a free-field for the evaluation of the transmission loss ...

Model BAS002 - Amplifier

by Larson Davis, a division of PCB Piezotronics

Measurement of reverberation time, sound isolation, and absorption coefficient are generally important measurements when verifying that a space or material complies with design goals. When making these measurements in the field or laboratory it is important to have equipment that is dependable, portable and easy to set up and use. When coupled ...

Model 381-NMS - Permanent Noise Monitoring System

by Larson Davis, a division of PCB Piezotronics

An Integrated Hardware & Software System with Digital Communication and an Open Interface for Long Term Noise Monitoring Applications. The Model 831-NMS permanent noise monitoring system is designed for long term monitoring around airports, industrial facilities, motorsport complexes, wind farms, mining operations, and within the general ...

Model 720 - Sound Level Meter

by Larson Davis, a division of PCB Piezotronics

The 720 was designed to do just what you need it to do. For example, a consultant that works heavily in the industrial hygiene sector will greatly benefit from having this hand-held data logging integrating sound level meter and, by removing the nose cone and revealing the 1 meter microphone extension cable, a personal noise dosimeter. The ...

Model 812 - Sound Level Meter

by Larson Davis, a division of PCB Piezotronics

There exists a need to select an instrument that will do just what you need it to do. The 812 was designed with this in mind. For example, a consultant that works heavily in the industrial hygiene sector will greatly benefit from having the Model 812, a hand held data logging integrating sound level meter and a personal noise dosimeter.

System 824 - Sound Level Meter

by Larson Davis, a division of PCB Piezotronics

The System 824 combines sound level meter and real-time analyzer capabilities in one small, rugged package. The instrument covers many important measuring functions in one user-friendly, hand-held design.

Need help finding the right suppliers?

Let the XPRTs do the work for you