Emergency Management Equipment in Cuba

Serving Cuba | Near Cuba
235 Results found
  • Category: Health & Safety ×

  • Subcategory: Emergency Management ×

  • Location: Latin America ×

  • Location: Cuba ×

Model 50 - Traffic Controller

by Grace Industries Inc     based in Transfer, PENNSYLVANIA (USA)

Approx. Size: 12-1/4” Long overall, 6” by 1-1/2” Diameter with 360º of luminary surface. Approx. Wt.: 6.7 oz. with 9 volt size alkaline battery included.

Model NFPA 6 - Explosion Protection

by IEP Technologies     based in Marlborough, MASSACHUSETTS (USA)

NFPA 68: Standard on Explosion Protection by Deflagration Venting products offered by IEP Technologies. Deflagration is acombustion that propagates through a gas or along the surface of an explosive at a rapid rate driven by the transfer of heat.  IEP Technologies are designed to comply with NFPA 68 and to detect and contain explosions from ...

Model PT500 - 500 Gal Poly Bulk Liquid Storage Tank

by Complete Environmental Products     based in Pasadena, TEXAS (USA)

CEP-PT500 Poly Bulk Liquid Storage Tank, 500 Gal, 22' Manhole .Manufactured from linear polyethylene in one piece, seamless construction, this tank series is designed for either indoor or outdoor applications. Flat bottom design provides for easy and cost efficient installation.

HazSim - Model PRO - 18 Meter HazMat Simulator

by HazSim - HazMat Simulation Training System     based in CALIFORNIA (USA)

The HazSim Pro is our top of line simulator. It is fully customizable and offers the largest suite of training scenarios for the HazSim family of training products. Included in the base model is a jump up from 6+ of the HazSim First Responder to a full-service suite of 18 multi-gas meters. The HazSim Pro enables your trainer to customize ...

HazSim - Model First Responder - 6 Gas HazMat Trainer

by HazSim - HazMat Simulation Training System     based in CALIFORNIA (USA)

The HazSim FR is a tool specifically designed for the smaller fire agency. It is an entry level model that offers a full suite of gas and radiation meters, the addition of a custom alarm feature at no extra cost. Base model starts at only $5,450You can add upgrades to the First Responder such as advanced meter options, languages, long range ...

Model BS 7 - Spark Detection & Extinguishment Systems

by GreCon Greten GmbH & Co. KG     based in Alfeld-Hannover, GERMANY

GreCon introduces interesting innovations in the detection, extinguishment and operation of their BS 7 spark extinguishing system in the area of preventive fire protection. The new products include the Hot Particle Detector HPD 1/8 for the detection of hot particles as well as Thermo Sensor TM 1/9 for the detection of ...

STS Plumes Simulation Exercise System

by Safe Training Systems Ltd     based in Wokingham, UNITED KINGDOM

STS has designed the PLUMES SIMULATION EXERCISE SYSTEM. A simulated survey meter, containing GPS and some real time computing, continuously establishes the operator’s position and calculates the airborne hazard that the operator should experience. This system adds great realism to exercises, and thus enhances the skills of monitoring staff.The ...

Speakman - Model SE-227 - Lifesaver Emergency Shower

by Spill Doctor (SA)     based in Cape Town, SOUTH AFRICA

The SE-227 Lifesaver Emergency Shower features an impeller action yellow Cycolac shower head with a horizontal overhead supply. The unit is activated with a 1' stay-open ball valve operated by a high visibility yellow pull rod.

Husky - Emergency Equipment Staging (EES) Mats

by Husky Portable Containment     based in Bartlesville, OKLAHOMA (USA)

Husky Emergency Equipment Staging (EES) Mats are designed with three sections, one section is for airpacks and has ribbing installed standard, the center section is for rescue tools and the third section is a “RIT” tarp. These can be used as one complete mat or as separates. All full/empty and staging mats are built with heavy duty 18 ...

Mycometer Surface - Mold Contamination Testing Tool

by Mycometer     based in Horsholm, DENMARK

Mycometer-surface is a versatile analytical tool for testing surfaces and bulk materials for mold contamination on-site. This method was developed by research mycologists at the University of Copenhagen in collaboration with building inspectors and mold remediation specialists. The aim was to specifically develop a method to quantify the level of ...

Need help finding the right suppliers?

Let the XPRTs do the work for you