acoustic calibrators Equipment in Ivory Coast

Served | Office inNear
32 Results found
  • Category: Health & Safety ×

  • Subcategory: Environmental Acoustics ×

  • Keyword: acoustic calibrators ×

  • Location: Africa ×

  • Location: Ivory Coast ×

Model CAL150 - Precision Acoustic Calibrator

by Larson Davis, a division of PCB Piezotronics     based in Depew, NEW YORK (USA)

IEC 60942 Class 2 Handheld Sound Level Calibrator for ½” microphones at 1000 Hz Used for Sound Level Meters and Noise Dosimeters.

Model CAL200 - Precision Acoustic Calibrator

by Larson Davis, a division of PCB Piezotronics     based in Depew, NEW YORK (USA)

The Model CAL200 is a battery operated, temperature compensated precise Class 1 Sound Calibrator for use with microphones. Adaptors allow the calibrator to be used with 1/4 and 3/8' microphones. The following specifications apply: Calibration frequency = 1kHz. Output Sound Pressure Level is selectable from 94 or 114 dB re 20Pa ( 0.2dB).

Model CAL250 - Precision Acoustic Calibrator

by Larson Davis, a division of PCB Piezotronics     based in Depew, NEW YORK (USA)

The Model CAL250 is a battery operated, temperature compensated precise Class 1 Sound Calibrator for use with 1 microphones for the performance measurement and calibration of Sound Level Meters and Dosimeters. Adaptors allow the calibrator to be used with 1/4,1/2 and3/8 microphones. The following specifications apply: - Calibration frequency = ...

Model CAL291 - Precision Acoustic Calibrator

by Larson Davis, a division of PCB Piezotronics     based in Depew, NEW YORK (USA)

The Model CAL291 is a dual channel Sound Calibrator. It is designed for measuring the residual intensity of sound intensity measurement systems. The following specifications apply: - When used with external signal generators the CAL291 Calibrator shall produce matched dual channel outputs of: ٠Sinusoids; Pink/White BB Noise. ٠1/3 ...

Brüel & Kjær - Model Type 4231 - Sound Calibrator

by Brüel & Kjær Sound & Vibration Measurement A/S     based in Nærum, DENMARK

A handy, portable sound source for calibration of sound level meters and other sound measurement equipment. The calibrator is very robust and stable, and conforms to EN/IEC 60942 Class LS and Class 1, and ANSI S1.40-1984. For maximum confidence in your measurement results you can quickly compensate for local measurement conditions by calibrating ...

Brüel & Kjær - Model Type 4720 - Echo Speech Source

by Brüel & Kjær Sound & Vibration Measurement A/S     based in Nærum, DENMARK

The Echo Speech Source features five different built-in and calibrated signals that are used by the DIRAC room acoustics software to calculate a range of speech intelligibility parameters.

DIRAC - Model Type 7841 - Room Acoustics Parameters

by Brüel & Kjær Sound & Vibration Measurement A/S     based in Nærum, DENMARK

PC software for measuring a wide range of room acoustical parameters in the field or laboratory according to ISO 3382 (room acoustics), ISO 18233 (analysis methods) and IEC 60268-16 (speech intelligibility).

ic Listen - Model LF Series - Digital Marine Acoustics

by Planet Ocean Ltd     based in Bracebridge, UNITED KINGDOM

Hear what others can’t with our deep ocean 1.6 kHz acoustic processor. Its wide bandwidth and sensitivity ensure low-level sounds get noticed. Noise cancellation software means easy-to-read displays with calibrated outputs in engineering units. Sensor only, or internally logging.

Model 1090EP - Pinger

by InterOcean Systems     based in San Diego, CALIFORNIA (USA)

The Model 1090EP is a programmable underwater acoustic pinger. The pinger offers eight frequencies, and eight operating modes consisting of four pulse rates and four burst intervals. In operation it periodically emits a 30 second burst of acoustic pulses. The pulse width is fixed a 22 milliseconds. The acoustic frequency, pulse repetition rate, ...

01dB - Model DUO - Smart Noise Monitor

by ACOEM     based in Limonest Cedex, FRANCE

01dB introduces the new version of the DUO Smart Noise Monitor. Totally modular, DUO provides its users with the most complete offering to upgrade from sound-level meter to monitoring station without changing equipment. Visually, DUO remains the same: a metallic profile allowing fast and secure anchoring, a rubber grip for better handling, a ...

Related Terms for acoustic calibrators

Need help finding the right suppliers?

Let the XPRTs do the work for you