acoustic calibrators Equipment in Idaho

10 Results found
  • Category: Health & Safety ×

  • Subcategory: Environmental Acoustics ×

  • Keyword: acoustic calibrators ×

  • Location: USA ×

  • Location: Idaho ×

Model CAL291 - Precision Acoustic Calibrator

by Larson Davis, a division of PCB Piezotronics

The Model CAL291 is a dual channel Sound Calibrator. It is designed for measuring the residual intensity of sound intensity measurement systems. The following specifications apply: - When used with external signal generators the CAL291 Calibrator shall produce matched dual channel outputs of: ٠Sinusoids; Pink/White BB Noise. ٠1/3 ...

Model CAL200 - Precision Acoustic Calibrator

by Larson Davis, a division of PCB Piezotronics

The Model CAL200 is a battery operated, temperature compensated precise Class 1 Sound Calibrator for use with microphones. Adaptors allow the calibrator to be used with 1/4 and 3/8' microphones. The following specifications apply: Calibration frequency = 1kHz. Output Sound Pressure Level is selectable from 94 or 114 dB re 20Pa ( 0.2dB).

Model CAL150 - Precision Acoustic Calibrator

by Larson Davis, a division of PCB Piezotronics

IEC 60942 Class 2 Handheld Sound Level Calibrator for ½” microphones at 1000 Hz Used for Sound Level Meters and Noise Dosimeters.

Model CAL250 - Precision Acoustic Calibrator

by Larson Davis, a division of PCB Piezotronics

The Model CAL250 is a battery operated, temperature compensated precise Class 1 Sound Calibrator for use with 1 microphones for the performance measurement and calibration of Sound Level Meters and Dosimeters. Adaptors allow the calibrator to be used with 1/4,1/2 and3/8 microphones. The following specifications apply: - Calibration frequency = ...

Brüel & Kjær - Model Type 4231 - Sound Calibrator

by Brüel & Kjær Sound & Vibration Measurement A/S

A handy, portable sound source for calibration of sound level meters and other sound measurement equipment. The calibrator is very robust and stable, and conforms to EN/IEC 60942 Class LS and Class 1, and ANSI S1.40-1984. For maximum confidence in your measurement results you can quickly compensate for local measurement conditions by calibrating ...

Acoustic Calibrator

by CCS Messgeräte Vertriebs-GmbH

The CEL-110 is designed and manufactured to comply with the requirements of the new IEC 60942 3rd edition 2003 Acoustic Calibrator standard. The calibrators are simple to use. The clear concise diplay shows when microphone is inserted correctly.

Pulsar - Model 105 & 106 - Acoustic Calibrators

by Pulsar Instruments plc

Models 105 and Model 106 are new technology sound calibrators that have been tested and formally EU Pattern Approved under certificate PTB-1.61.4028829, as meeting all the requirements of the latest International standard, IEC 60942 : 2003.This version of the IEC standard is far more stringent than previous versions and so far very few ...

DeltaOHM - Model HD2060 - Vibration Acelerometer Calibrator

by Delta OHM S.r.L.

The calibrator HD2060 generates mechanical vibration amplitude controlled withprecision and frequency stabilized by a quartz. Coupling a transducer to the vibratingbase of the calibrator it is possible to check its sensitivity to acceleration, velocity or displacement. The presence of a rechargeable internal battery, theweight and the small ...

Acoustic Calibrators - Class 1 and Class 2 with Type Approval

by Cirrus Research plc

All Cirrus Research plc instruments, from the simple handheld Sound Level Meters, to the Airport and Environmental Noise Analysers are manufactured to meet the requirements of the relevant international standards.

SVANTEK - Model SV 102 - Dual Channel Acoustic Dosimeter

by SVANTEK Ltd.

SV 102 dual channel instrument presents completely new approach to occupational health and safety acoustic monitoring task. The binaural dose measurements and the 1/1 octave analysis are simultaneously performed. Octave analysis provides direct data for the design of the ear-protectors. Together with audio-events-recording option, these ...

Related Terms for acoustic calibrators

Need help finding the right suppliers?

Let the XPRTs do the work for you