explosion modeling Equipment

14 Results found
  • Category: Health & Safety ×

  • Subcategory: Fire Safety ×

  • Keyword: explosion modeling ×

Model 125 - Smoke Detector

by Codel International Ltd

In the event of fire in a building or other structure, such as an oil rig, Health and Safety regulations require that immediate action be taken to prevent the ingress of smoke and fume into the air-conditioning and ventilation ducts. The Model 125 explosion-proof smoke monitor is specifically designed to be mounted in the ventilation ducts and ...

Model 94520 - Emergency Pressure Vent and Manhole Cover

by Shand & Jurs (L&J Technologies & L&J Engineering)

The Shand & Jurs Model 94520 Emergency Vent provides emergency venting and manhole requirements, where intermediate pressure relief beyond that provided by tank conservation vents is required. This vent is not intended to meet requirements of explosion relief, but is designed to relieve excessive internal pressure. It is a economical solution ...

Ashcroft - Model A-Series - Miniature Explosion Proof Pressure Switch

by Ashcroft Inc.

The Ashcroft A-Series miniature pressure switches are designed for tough applications where conventional designs often don't measure up. A rugged 316 SS enclosure gives uncompromising protection. Materials of construction have been selected for long life. Precision snap acting micro switches are featured and fully encased to prevent moisture from ...

Model SVB2-S-100-EX - MARSAL-Explosion Proof Single Ram Baler.

by Marsal Waste Management Ltd

The SVB2-S-100-EX is the smallest of our Explosion Proof Marine Balers in the range, offering straight forward installation due to it's specifically designed dimensions. This Compactor will complete onboard compacting procedures and is capable of processing most soft waste materials from small Cans &Tins, Plastics from Wrapping Materials to ...

Intrinsic Safety

by HafcoVac

HafcoVac explosion proof industrial vacuums are suitable for use in Class I, Class II, and Class III environments, Division 1 and 2.

Model FL3100H - UV/IR Flame Detector

by General Monitors

The Model FL3100H is an Ultraviolet / Infrared flame detector designed to detect fires and provide alarm outputs directly from the detector while maintaining false alarm immunity. It detects fires by monitoring in both the ultraviolet (UV) and infrared (IR) spectral ranges, making it highly immune to false alarms. Configurations with dual Modbus ...

Model FL3100H-H2 - UV/IR Flame Detector for Hydrogen Applications

by General Monitors

The Model FL3100H-Hydrogen is an Ultraviolet / Infrared flame detector designed specifically to detect hydrogen (H2) fires and provide alarm outputs directly from the detector while maintaining false alarm immunity. It detects H2 fires by monitoring in both the ultraviolet (UV) and infrared (IR) spectral ranges, making it highly immune to false ...

Model RX-415 - Portable Combination Hc/O2 Gas Detector

by RKI Instruments, Inc.

This model has two versions and is a combination type portable HC/O2 or CH4/O2 gas detector with an Infrared (NDIR) type sensor and galvanic cell type sensor. These sensors provide accurate detection of HC/O2 (HC version) or CH4/O2 (CH4 version) levels even in N2 and other inert environments. The measuring ranges are 0-100%LEL/0-100 vol% for HC or ...

Model FL3110 - UV/IR Flame Detector (EU)

by General Monitors

The Model FL3110 is an Ultraviolet/Infrared (UV/IR) flame detector designed to detect unwanted fires and provide alarm outputs directly from the detector while maintaining false alarm immunity. The FL3110's electronics are integral within its stainless steel explosion-proof housing, allowing detector information to be processed at the point of ...

Model X5200 - UVIR Flame Detector

by Det-Tronics - Detector Electronics Corporation

The evolution continues with the new X5200 UVIR Flame Detector. Approved to FM 3260 (2000), the X5200 meets the most stringent requirements worldwide with advanced detection capabilities and immunity to extraneous sources, combined with a superior mechanical design. The mounting arrangement allows the UV and IR sensors to monitor the same ...

Need help finding the right suppliers?

Let the XPRTs do the work for you