explosion protection Equipment in Quebec

Serving Quebec | Office in QuebecNear Quebec
128 Results found
  • Category: Health & Safety ×

  • Subcategory: Fire Safety ×

  • Keyword: explosion protection ×

  • Location: Canada ×

  • Location: Quebec ×

Model NFPA 6 - Explosion Protection

by IEP Technologies     based in Marlborough, MASSACHUSETTS (USA)

NFPA 68: Standard on Explosion Protection by Deflagration Venting products offered by IEP Technologies. Deflagration is acombustion that propagates through a gas or along the surface of an explosive at a rapid rate driven by the transfer of heat.  IEP Technologies are designed to comply with NFPA 68 and to detect and contain explosions from ...

Explosion Protection Valve

by ATEX Brand- und Explosionsschutz GmbH     based in Moehnesee, GERMANY

The explosion protection valve prevents the dust explosion from expanding beyond the place where it is fitted. The valve acts as a flame barrier at the same time. In the event of an explosion, the valve detects the event through the kinetic energy preceding the pressure wave, and closes of the affected area. It is primarily used in clean air ...

Lift-Gard - Flat Venting System

by Elfab Limited     based in North Shields, UNITED KINGDOM

ATEX approved Lift-Gard is the only flat venting system that combines an integral frame and detection system in one unit.Designed for use in protecting Vertical Bucket Elevators from harmful explosions, Elfab's Lift-Gard offers a low cost, easy to install and maintenance free solution to help comply with latest regulatory developments.

ATEX - Nozzle Systems

by ATEX Brand- und Explosionsschutz GmbH     based in Moehnesee, GERMANY

ATEX offers a variety of nozzle systems, so that the required functionality of the explosion suppres-sion pressure system can be ensured in each individual case. The choice of the right system, however, is always made in the light of the particular process concerned. The ATEX nozzle systems are particu-larly used in fields where hygienic ...

CP MICROTHERM - Model C - Electric Heater

by INTERTEC-Hess GmbH     based in Neustadt/Donau, GERMANY

The very versatile MICROTHERM line consists of electric heaters designed to heat the air in the enclosure by convection.Wherever possible, a heater designed for temperature class T3 should be selected. A temperature fuse is integrated in the heater that cuts off the power in case of a technical failure or excessive heating resulting from an ...

Intrinsic Safety

by HafcoVac     based in Midland Park, NEW JERSEY (USA)

HafcoVac explosion proof industrial vacuums are suitable for use in Class I, Class II, and Class III environments, Division 1 and 2.

Model Elite. Series - Explosives Detection & Identification Kit

by Field Forensics, Inc. (FFI)     based in St. Petersburg, FLORIDA (USA)

The E.L.I.T.E.™ Series, designed for detection and identification of trace explosives and explosives precursors, is field-proven and currently in use with military, police, and commercial security units around the world. There are two main products in the series:

Explosion Diverter

by ATEX Explosion Hazards Ltd.     based in Lymm, UNITED KINGDOM

The TV Explosion Diverter from Atex is a mechanical explosion isolation device which protects ductwork and attached vessels by venting flame and pressure to a safe area.

Scientific Dust Collectors - Explosion Vents

by Scientific Dust Collectors     based in Alsip, ILLINOIS (USA)

At SDC, we take combustible dust very seriously. Providing a safe and accurate solution to your combustible dust problem is our highest priority. At SDC we are able to provide explosion vent sizing and recommendations for your specific application according to the latest regulations provided by the National Fire Protection Agency (NFPA) and the ...

GreCon - Model BS 7 - Spark Detection and Extinguishment Systems

by GreCon Greten GmbH & Co. KG     based in Alfeld-Hannover, GERMANY

In many different industries where bulk materials are processed, fires and dust explosions occur again and again worldwide with far-reaching consequences. Interruptions of the production process that are caused this way lead to substantial follow-up costs – quite apart from the direct damage to persons and property. With GreCon spark ...

Need help finding the right suppliers?

Let the XPRTs do the work for you